Slopes, wedges, and windscreens allow you to include angled sections in your model.
Wedges have an angle relative to the horizontal plane, while slopes and windscreens have an angle relative to a vertical plane.
Slopes have an angle along a vertical axis.
There are only a few sloped parts with these very shallow angles.
This angle is most commonly found in the popular 3× slope bricks.
The most common angle for sloped LEGO elements, as popularized by 2× slope bricks.
 | 45° 2×1 Slope 3040 |
 | 45° 2×2 Slope 3039 |
 | 45° 2×3 Slope 3038 |
 | 45° 2×4 Slope 3037 |
 | 45° 2×6 Slope 23949 |
 | 45° 2×8 Slope 4445 |
 | 45° 2×2 Corner Slope 3045 |
 | 45° 2×2 Inside Corner Slope 3046 |
 | 45° 2×1 w/ Cutout 92946 |
 | 45° 2×2 w/ Cutout 28192 |
 | 45° 2×4 w/ Cutout 5540 N |
 | 45° 1×1×⅔ Pyramid 22388 |
 | 45° 1×1 Dbl. Slope 35464 |
 | 45° 2×1 Dbl. Slope 3044 |
 | 45° 2×2 Dbl. Slope 3043 |
 | 45° 2×4 Dbl. Slope 3041 |
 | 45° 1×2 Dbl. Slope, Inv. 3049 |
 | 45° 2×1 Triple Slope 15571 |
 | 45° / 33° 6×4 Train Roof 13269 |
 | 45° 6×4 Train Roof 32083 |
 | 45° 2×4×1⅓ Dbl. Slope 80545 |
 | 45° 10×2×2 Dbl. Slope 30180 |
These are very steep sloped elements which are taller than a single brick.
A selection of inverted slopes are also available. Most are inverted versions of other sloped elements.
 | -33° 3×1 Inv. Slope 4287 |
 | -33° 3×2 Inv. Slope 3747 |
 | -45° 2×1 Inv. Slope 3665 |
 | -45° 2×2 Inv. Slope 3660 |
 | -45° 2×2 Inv. Corner Slope 3676 |
 | -45 3×1 Inv. Dbl. Slope 18759 |
 | -45° 2×1 Inv. Slope w/ Cutout 2310 |
 | -45° 4×1 Inv. Dbl. Slope 32802 |
 | -45° 4×2 Inv. Dbl. Slope 4871 |
 | -45° 4×4 Inv. Dbl. Slope 72454 |
 | -45° 6×1 Inv. Dbl. Slope 52501 |
 | -45° 6×2 Inv. Dbl. Slope 22889 |
 | -45° 6×4 Inv. Dbl. Slope 60219 |
 | -45° 6×8 Inv. Dbl. Slope 5117 N |
 | -60° 4×1×3 Inv. Slope 67440 |
 | -75° 2×1×3 Inv. Slope 2449 |
 | Panel, Angled (Tipper) 30022 |
A windscreen is a panel that is sloped on a vertical axis.
A brick or plate that is sloped on the horizontal axis.
Wedge Plates with a 45° angle
The 63° angle is the result of cutting off a section with a 1:2 ratio.
The 72° angle is the result of cutting off a section with a 1:3 ratio.
The 76° angle is the result of cutting off a section with a 1:4 ratio.
The 80° angle is the result of cutting off a section with a 1:6 ratio.
Wedge plates with compound angles and plates with studs positioned at multiple angles.
Smooth tiles with an angled or wedge shape.
Bricks with one or more angled corners.
Panel elements with one or more wedge-shaped angles.
Parts with compound angles that combine attributes of a wedge and a slope in a single piece.
Parts with compound angles that slope upward.
 | 6×8 Wedge, Pointed w/ Cutout 22390 |
 | 2×2 Wedge Slope 13548 |
 | 2×4 Dbl. Wedge Slope 47759 |
 | 4×4 Wedge Slope 43708 |
 | 3×4 Corner Slope 4861 |
 | 4×2 Wedge Slope R. 43711 |
 | 4×2 Wedge Slope L. 43710 |
 | 4×4 Wedge Slope 48933 |
 | 65° 2×2×2 Corner Wedge 78886 |
 | 4×4 Wedge, Pointed 22391 |
 | 4×4 Wedge w/ Cutout 93348 |
 | 4×4 Wedge, Fractured 64867 |
 | 6×4 Wedge Slope w/ Cutout 6153 |
 | 3×3 Wedge Slope L. 42862 |
 | 3×3 Wedge Slope R. 48165 |
 | 33° 2×2 Double Wedge, Curved 1762 |
 | 2×16 Wedge Slope, Dbl. 30382 |
 | 5×2 Wedge Slope R. 3505 N |
 | 5×2 Wedge Slope L. 3504 N |
 | 1×5×1⅓ Wedge Slope L. 3388 N |
 | 1×5×1⅓ Wedge Slope R. 3389 N |
Parts with a compound angle that slope downward.
Windscreens and panels with a compound shape that combines a wedge and a slope.
