Last Updated: April 29, 2020
This page contains top 1000 pieces based on the 5-year span of 2015-2019, and was snapshotted from rebricable data on April 29, 2020. That’s far enough into 2020 to feel confident that most sets released in 2015-2019 have been inventoried by now.
This page is not meant for widespread use. It loads very slowly and may render poorly, in part because I do not have a picture for all of these parts, but they try to load anyways.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 1 — |  |
3023 | 1×2 Plate | 48 | 31374 |
| 2 (+1) |  |
3024 | 1×1 Plate | 46 | 28818 |
| 3 (-1) |  |
4073 | 1×1 Plate, Round | 40 | 27793 |
| 4 — |  |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 21001 |
| 5 — |  |
54200 | 1×1 Slope 30° (Cheese) | 50 | 13886 |
| 6 (+1) |  |
3069b | 1×2 Tile | 46 | 13254 |
| 7 (-1) |  |
3004 | 1×2 Brick | 40 | 13057 |
| 8 — |  |
3710 | 1×4 Plate | 34 | 12515 |
| 9 — |  |
3005 | 1×1 Brick | 48 | 11376 |
| 10 — |  |
3020 | 2×4 Plate | 35 | 10941 |
| 11 — |  |
3022 | 2×2 Plate | 30 | 10563 |
| 12 — |  |
2412b | 1×2 Tile, Grille | 25 | 9102 |
| 13 — |  |
6558 | Technic Pin Long with Friction Ridges Lengthwise | 1 | 8913 |
| 14 — |  |
15573 | 1×2 Jumper | 29 | 8815 |
| 15 (+1) |  |
98138 | 1×1 Tile, Round | 32 | 8548 |
| 16 (+2) |  |
3021 | 2×3 Plate | 28 | 7808 |
| 17 — |  |
3070b | 1×1 Tile | 40 | 7789 |
| 18 (-3) |  |
3003 | 2×2 Brick | 37 | 7146 |
| 19 — |  |
3666 | 1×6 Plate | 31 | 7132 |
| 20 (+1) |  |
3623 | 1×3 Plate | 32 | 7082 |
| 21 (+1) |  |
11477 | 2×1 Curved | 39 | 6984 |
| 22 (-2) |  |
2431 | 1×4 Tile | 38 | 6721 |
| 23 (+2) |  |
85984 | 1×2 Slope 30° (Double Cheese) | 32 | 6483 |
| 24 (-1) |  |
4274 | Technic Pin 1/2 | 2 | 6365 |
| 25 (-1) |  |
3010 | 1×4 Brick | 33 | 6269 |
| 26 (+1) |  |
3001 | 2×4 Brick | 30 | 6130 |
| 27 (-1) |  |
3062b | Brick Round 1 x 1 Open Stud | 33 | 5754 |
| 28 (+2) |  |
2420 | 2×2 Plate, Corner | 22 | 5642 |
| 29 (+7) |  |
15068 | 2×2 Curved | 35 | 5394 |
| 30 (-2) |  |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5165 |
| 31 — |  |
87580 | 2×2 Jumper | 31 | 5102 |
| 32 — |  |
3795 | 2×6 Plate | 28 | 5048 |
| 33 (-4) |  |
3068b | 2×2 Tile | 34 | 4888 |
| 34 — |  |
87079 | 2×4 Tile | 35 | 4771 |
| 35 (-2) |  |
3040 | 2×1 Slope 45° | 35 | 4573 |
| 36 (+3) |  |
4032 | 2×2 Plate, Round w/ Axle | 21 | 4319 |
| 37 (+1) |  |
6636 | 1×6 Tile | 27 | 4304 |
| 38 (-1) |  |
87087 | 1×1 Brick, Stud 1-side | 27 | 4074 |
| 39 (+7) |  |
15712 | 1×1 Clip, Top | 12 | 3989 |
| 40 (+26) |  |
85861 | 1×1 Plate, Round w/ hole | 17 | 3959 |
| 41 — |  |
32062 | Technic Axle 2 Notched | 2 | 3840 |
| 42 — |  |
3622 | 1×3 Brick | 28 | 3775 |
| 43 (-3) |  |
4589 | 1×1 Cone | 33 | 3677 |
| 44 (-1) |  |
4070 | 1×1 Brick, Headlight | 17 | 3604 |
| 45 (-10) |  |
33291 | 1×1 Plate, Flower (4 Petals) | 16 | 3602 |
| 46 (-1) |  |
3941 | 2×2 Brick, Round w/ Axle | 27 | 3511 |
| 47 (-3) |  |
3009 | 1×6 Brick | 28 | 3483 |
| 48 — |  |
3460 | 1×8 Plate | 27 | 3376 |
| 49 (+1) |  |
99780 | 1×2 Bracket, Inverted | 15 | 3354 |
| 50 (-3) |  |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 2 | 3328 |
| 51 (-2) |  |
63864 | 1×3 Tile | 28 | 3272 |
| 52 (+3) |  |
99207 | 2×2 Bracket, Inverted | 11 | 3118 |
| 53 (-2) |  |
32028 | 1×2 Plate w/ Door Rail | 17 | 3069 |
| 54 (+4) |  |
4085 | Plate Special 1 x 1 with Clip Vertical [Thin Open O Clip] | 13 | 2902 |
| 55 (-1) |  |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush | 4 | 2883 |
| 56 (+9) |  |
6091 | 1×2×1⅔ Curved | 31 | 2855 |
| 57 (+12) |  |
11211 | 1×2 Brick, 2 Studs 1-side | 13 | 2845 |
| 58 (+4) |  |
4162 | 1×8 Tile | 22 | 2816 |
| 59 (-7) |  |
3039 | 2×2 Slope 45° | 32 | 2797 |
| 60 (-4) |  |
2654 | 2×2 Round, Boat Stud | 24 | 2779 |
| 61 (+3) |  |
44728 | 2×2 Bracket | 17 | 2743 |
| 62 (-9) |  |
3700 | 1×2 Technic Brick, 1 Hole | 16 | 2727 |
| 63 (-4) |  |
2357 | 2×2 Brick, Corner | 21 | 2725 |
| 64 (-4) |  |
3660 | 2×2 Slope 45°, Inverted | 26 | 2676 |
| 65 (+2) |  |
3034 | 2×8 Plate | 28 | 2674 |
| 66 (-9) |  |
3665 | 2×1 Slope 45°, Inverted | 28 | 2657 |
| 67 (-6) |  |
3713 | Technic Bush | 3 | 2563 |
| 68 — |  |
4519 | Technic Axle 3 | 2 | 2526 |
| 69 (+1) |  |
59443 | Technic Axle Connector | 10 | 2521 |
| 70 (+4) |  |
41740 | Plate Special 1 x 4 with 2 Studs with New Underside | 26 | 2504 |
| 71 (+1) |  |
63868 | 1×2 Plate w/ Clip End, Horizontal | 12 | 2485 |
| 72 (-1) |  |
98283 | 1×2 Brick, Masonry | 8 | 2465 |
| 73 (-10) |  |
60478 | 1×2 Plate w/ Handle, End | 14 | 2465 |
| 74 (+2) |  |
92280 | 1×2 Plate w/ Clip, Top | 6 | 2347 |
| 75 (-2) |  |
48336 | 1×2 Plate w/ Handle, Side | 12 | 2342 |
| 76 (-1) |  |
30136 | 1×2 Brick, Log (Palisade) | 13 | 2279 |
| 77 (+19) |  |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 8 | 2225 |
| 78 — |  |
32064 | 1×2 Technic Brick, 1 Axle Hole | 13 | 2108 |
| 79 (+6) |  |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 18 | 2032 |
| 80 (+22) |  |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 15 | 2020 |
| 81 (+8) |  |
99781 | Bracket 1 x 2 – 1 x 2 | 11 | 1986 |
| 82 (+54) |  |
24866 | Plant, Flower 1 x 1 | 14 | 1984 |
| 83 (-4) |  |
50950 | 3×1 Curved | 32 | 1938 |
| 84 (-4) |  |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 18 | 1937 |
| 85 (-8) |  |
2877 | Brick Special 1 x 2 with Grill | 9 | 1930 |
| 86 (+1) |  |
93273 | 4×1 Curved, Double | 29 | 1924 |
| 87 (+3) |  |
3031 | Plate 4 x 4 | 22 | 1907 |
| 88 (-4) |  |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] | 17 | 1892 |
| 89 (+64) |  |
25269 | Tile Round 1 x 1 Quarter | 28 | 1880 |
| 90 (-8) |  |
3002 | 2×3 Brick | 14 | 1863 |
| 91 (-10) |  |
6541 | Technic Brick 1 x 1 with Hole | 14 | 1852 |
| 92 (-4) |  |
4477 | 1×10 Plate | 15 | 1816 |
| 93 (+31) |  |
18654 | Technic Pin Connector Round 1L [Beam] | 11 | 1812 |
| 94 (-8) |  |
3673 | Technic Pin without Friction Ridges Lengthwise | 1 | 1775 |
| 95 (+10) |  |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 1760 |
| 96 (-3) |  |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 13 | 1725 |
| 97 (+3) |  |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 18 | 1724 |
| 98 (-1) |  |
62462 | Technic Pin Connector Round [Slotted] | 18 | 1685 |
| 99 (-5) |  |
6536 | Technic Axle and Pin Connector Perpendicular | 13 | 1663 |
| 100 (-9) |  |
32523 | Technic Beam 1 x 3 Thick | 16 | 1659 |
| 101 (-9) |  |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 14 | 1651 |
| 102 (-3) |  |
14769 | 2×2 Tile, Round | 27 | 1637 |
| 103 (+14) |  |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 4 | 1623 |
| 104 (-9) |  |
32316 | Technic Beam 1 x 5 Thick | 17 | 1603 |
| 105 (+10) |  |
3032 | Plate 4 x 6 | 21 | 1518 |
| 106 (+4) |  |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 6 | 1508 |
| 107 (-3) |  |
32140 | Technic Beam 2 x 4 L-Shape Thick | 13 | 1496 |
| 108 (+17) |  |
87994 | Bar 3L | 11 | 1485 |
| 109 (-3) |  |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 9 | 1479 |
| 110 (-3) |  |
32524 | Technic Beam 1 x 7 Thick | 17 | 1477 |
| 111 (-13) |  |
53451 | Barb Small Flexible [Claw, Horn] | 12 | 1476 |
| 112 (-9) |  |
4740 | 2×2 Dish | 27 | 1462 |
| 113 (+3) |  |
32000 | Technic Brick 1 x 2 [2 Holes] | 9 | 1453 |
| 114 (-2) |  |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 10 | 1418 |
| 115 (-6) |  |
2456 | 2×6 Brick | 20 | 1417 |
| 116 (-2) |  |
3832 | 2×10 Plate | 15 | 1416 |
| 117 (-6) |  |
4286 | Slope 33┬░ 3 x 1 | 22 | 1406 |
| 118 (-17) |  |
30374 | Bar 4L (Lightsaber Blade / Wand) | 18 | 1400 |
| 119 (+2) |  |
32526 | Technic Beam 3 x 5 L-Shape Thick | 17 | 1376 |
| 120 (-12) |  |
32013 | Technic Axle and Pin Connector Angled #1 | 12 | 1372 |
| 121 (-8) |  |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 25 | 1370 |
| 122 (+60) |  |
20482 | Tile Round 1 x 1 with Pin | 15 | 1348 |
| 123 (+14) |  |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 6 | 1335 |
| 124 (-6) |  |
3008 | 1×8 Brick | 16 | 1323 |
| 125 (-3) |  |
3705 | Technic Axle 4 | 2 | 1300 |
| 126 (-3) |  |
4865b | Panel 1 x 2 x 1 [Rounded Corners] | 23 | 1295 |
| 127 — |  |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 11 | 1283 |
| 128 (+3) |  |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 11 | 1283 |
| 129 (-46) |  |
15379 | Technic Link Tread with Beveled Edge | 2 | 1262 |
| 130 (-11) |  |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1257 |
| 131 (-5) |  |
3701 | Technic Brick 1 x 4 [3 Holes] | 10 | 1232 |
| 132 (-12) |  |
4081b | Plate Special 1 x 1 with Clip Light [Thick Ring] | 13 | 1219 |
| 133 (+15) |  |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 17 | 1192 |
| 134 (-4) |  |
32073 | Technic Axle 5 | 2 | 1183 |
| 135 (-2) |  |
4599b | Tap 1 x 1 with Hole in Spout | 10 | 1178 |
| 136 (-4) |  |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 20 | 1163 |
| 137 (-8) |  |
87083 | Technic Axle 4 with Stop | 1 | 1156 |
| 138 (+20) |  |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 1147 |
| 139 (-11) |  |
60481 | Slope 65┬░ 2 x 1 x 2 | 25 | 1142 |
| 140 (+46) |  |
24201 | Slope Curved 2 x 1 Inverted | 16 | 1135 |
| 141 (-2) |  |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 9 | 1118 |
| 142 (-4) |  |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly] | 12 | 1116 |
| 143 — |  |
64644 | Equipment Telescope | 7 | 1109 |
| 144 (-3) |  |
41677 | Technic Beam 1 x 2 Thin | 7 | 1105 |
| 145 (+9) |  |
60474 | Plate Round 4 x 4 with Pin Hole | 21 | 1084 |
| 146 (-12) |  |
87552 | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 12 | 1070 |
| 147 (-7) |  |
3065 | Brick 1 x 2 without Bottom Tube | 12 | 1065 |
| 148 (-4) |  |
40490 | Technic Beam 1 x 9 Thick | 11 | 1060 |
| 149 (+13) |  |
32278 | Technic Beam 1 x 15 Thick | 15 | 1059 |
| 150 (-15) |  |
51739 | Wedge Plate 2 x 4 | 20 | 1054 |
| 151 (-5) |  |
60479 | 1×12 Plate | 10 | 1046 |
| 152 — |  |
11090 | Bar Holder with Clip | 9 | 1040 |
| 153 (+30) |  |
60592 | Window 1 x 2 x 2 Flat Front | 13 | 1033 |
| 154 (+50) |  |
18674 | Tile 2 x 2 Round with Center Stud | 14 | 1017 |
| 155 (+1) |  |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 10 | 1016 |
| 156 (+1) |  |
49668 | Plate Special 1 x 1 with Tooth | 16 | 1013 |
| 157 (+31) |  |
18677 | Plate Special 1 x 2 with Pin Hole | 6 | 1010 |
| 158 (-16) |  |
2432 | Tile Special 1 x 2 with Handle | 15 | 1010 |
| 159 (+9) |  |
15392 | Weapon Gun Trigger | 2 | 1005 |
| 160 (+6) |  |
3937 | Hinge Brick 1 x 2 Base | 12 | 986 |
| 161 (-14) |  |
2450 | Wedge Plate 3 x 3 Cut Corner | 20 | 980 |
| 162 (-2) |  |
63965 | Bar 6L with Stop Ring | 11 | 978 |
| 163 (-4) |  |
3035 | Plate 4 x 8 | 24 | 974 |
| 164 (+31) |  |
85080 | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 22 | 972 |
| 165 (-20) |  |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 6 | 961 |
| 166 (+10) |  |
15535 | Tile 2 x 2 Round with Hole | 9 | 961 |
| 167 (-12) |  |
32525 | Technic Beam 1 x 11 Thick | 15 | 960 |
| 168 (-18) |  |
3037 | Slope 45┬░ 2 x 4 | 19 | 944 |
| 169 (+12) |  |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 936 |
| 170 (+21) |  |
15070 | Plate Special 1 x 1 with Vertical Tooth | 12 | 936 |
| 171 (-7) |  |
43722 | Wedge Plate 3 x 2 Right | 19 | 933 |
| 172 (-11) |  |
3958 | Plate 6 x 6 | 29 | 931 |
| 173 (+11) |  |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 11 | 929 |
| 174 (-11) |  |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 9 | 927 |
| 175 (-26) |  |
298c02 | Lever Small Base with Black Lever | 6 | 925 |
| 176 (+14) |  |
14719 | 2×2 Tile, Corner | 13 | 911 |
| 177 (-8) |  |
43723 | Wedge Plate 3 x 2 Left | 20 | 907 |
| 178 (-6) |  |
41769 | Wedge Plate 4 x 2 Right | 21 | 903 |
| 179 (-14) |  |
2445 | 2×12 Plate | 14 | 890 |
| 180 (-13) |  |
32039 | Technic Axle Connector with Axle Hole | 5 | 889 |
| 181 (-11) |  |
6632 | Technic Beam 1 x 3 Thin | 10 | 888 |
| 182 (-11) |  |
3747b | Slope Inverted 33┬░ 3 x 2 [No Connections between Studs] | 15 | 876 |
| 183 (+76) |  |
99563 | Money / Gold Bar [Ingot] | 10 | 873 |
| 184 (-11) |  |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 870 |
| 185 (-5) |  |
41770 | Wedge Plate 4 x 2 Left | 22 | 869 |
| 186 (-7) |  |
30565 | Plate Round Corner 4 x 4 | 23 | 862 |
| 187 (-36) |  |
6231 | Panel 1 x 1 x 1 Corner | 13 | 857 |
| 188 (-13) |  |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 848 |
| 189 (+83) |  |
26047 | Plate 1 x 1 Rounded with Handle | 9 | 830 |
| 190 (+379) |  |
35480 | Plate Special 1 x 2 Rounded with 2 Open Studs | 13 | 830 |
| 191 (-6) |  |
60601 | Glass for Window 1 x 2 x 2 Flat | 11 | 813 |
| 192 (-18) |  |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 14 | 813 |
| 193 (+5) |  |
87620 | Facet 2 x 2 | 15 | 796 |
| 194 (+13) |  |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex | 11 | 796 |
| 195 (-3) |  |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 788 |
| 196 (-19) |  |
3298 | Slope 33┬░ 3 x 2 | 18 | 786 |
| 197 (-8) |  |
92947 | Brick Round 2 x 2 [Grill] | 9 | 783 |
| 198 (+227) |  |
33909 | Tile Special 2 x 2 with Only 2 studs | 10 | 774 |
| 199 (-6) |  |
32556 | Technic Pin Long without Friction Ridges | 1 | 768 |
| 200 (-13) |  |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 757 |
| 201 (+12) |  |
11212 | Plate 3 x 3 | 9 | 752 |
| 202 (+134) |  |
26603 | 2×3 Tile | 14 | 746 |
| 203 (-25) |  |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 6 | 744 |
| 204 (+113) |  |
26601 | Wedge Plate 2 x 2 Cut Corner | 17 | 738 |
| 205 (+19) |  |
30357 | Plate Round Corner 3 x 3 | 26 | 736 |
| 206 (+9) |  |
44302 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 7 | 716 |
| 207 (-5) |  |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 18 | 710 |
| 208 (-12) |  |
4460b | Slope 75┬░ 2 x 1 x 3 with Hollow Stud | 19 | 706 |
| 209 (-12) |  |
32002 | Technic Pin 3/4 | 2 | 703 |
| 210 (+13) |  |
4282 | 2×16 Plate | 12 | 701 |
| 211 (+198) |  |
27925 | Tile 2 x 2 Curved, Macaroni | 21 | 700 |
| 212 (+8) |  |
88646 | Tile Special 4 x 3 with 4 Studs in Centre | 5 | 690 |
| 213 (-8) |  |
3176 | Plate Special 3 x 2 with Hole | 18 | 688 |
| 214 (-6) |  |
41239 | Technic Beam 1 x 13 Thick | 15 | 680 |
| 215 (+7) |  |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 673 |
| 216 (-15) |  |
2453 | Brick 1 x 1 x 5 with Blocked Open Stud | 17 | 672 |
| 217 (+175) |  |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 16 | 670 |
| 218 (-15) |  |
60477 | Slope 18┬░ 4 x 1 | 13 | 661 |
| 219 (-9) |  |
60596 | Door Frame 1 x 4 x 6 Type 2 | 15 | 660 |
| 220 (+24) |  |
33183 | Plant, Carrot Top | 4 | 654 |
| 221 (+74) |  |
24246 | Tile 1 x 1 Half Circle | 12 | 648 |
| 222 (+5) |  |
15462 | Technic Axle 5 with Stop | 2 | 647 |
| 223 (+2) |  |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Ball | 1 | 647 |
| 224 (+13) |  |
93274 | Bracket 1 x 2 – 2 x 4 | 11 | 645 |
| 225 (-8) |  |
87544 | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 14 | 641 |
| 226 (-26) |  |
87747 | Barb Medium Flexible [Claw, Horn] | 15 | 639 |
| 227 (+133) |  |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 14 | 638 |
| 228 (-19) |  |
3706 | Technic Axle 6 | 2 | 632 |
| 229 (-35) |  |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 627 |
| 230 — |  |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 625 |
| 231 (+5) |  |
11203 | Tile Special 2 x 2 Inverted | 11 | 622 |
| 232 (-6) |  |
44294 | Technic Axle 7 | 2 | 621 |
| 233 (-21) |  |
32449 | Technic Beam 1 x 4 Thin | 7 | 620 |
| 234 (-18) |  |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 21 | 619 |
| 235 (-17) |  |
3036 | Plate 6 x 8 | 15 | 619 |
| 236 (-3) |  |
93606 | Slope Curved 4 x 2 No Studs | 19 | 614 |
| 237 (-16) |  |
30503 | Wedge Plate 4 x 4 Cut Corner | 13 | 614 |
| 238 (-24) |  |
4287 | Slope Inverted 33┬░ 3 x 1 (34┬░) | 15 | 606 |
| 239 (-33) |  |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 23 | 605 |
| 240 — |  |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 8 | 602 |
| 241 (+1) |  |
4624 | Wheel 8mm x 6mm with Slot | 5 | 596 |
| 242 (-43) |  |
6587 | Technic Axle 3 with Stud | 3 | 593 |
| 243 (-2) |  |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 3 | 591 |
| 244 (-15) |  |
54383 | Wedge Plate 6 x 3 Right | 13 | 589 |
| 245 (+74) |  |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 6 | 587 |
| 246 (+25) |  |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 10 | 584 |
| 247 (-1) |  |
6179 | Tile Special 4 x 4 with Studs on Edge | 18 | 584 |
| 248 (-13) |  |
3957 | Antenna 1 x 4 with Rounded Top | 12 | 582 |
| 249 (+5) |  |
2423 | Plant, Leaves 4 x 3 | 10 | 579 |
| 250 (-19) |  |
54384 | Wedge Plate 6 x 3 Left | 13 | 567 |
| 251 (+74) |  |
24316 | Technic Axle 3 with Stop | 1 | 567 |
| 252 (-7) |  |
11215 | Bracket 5 x 2 x 1 1/3 | 9 | 565 |
| 253 (-34) |  |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 8 | 561 |
| 254 (+11) |  |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 555 |
| 255 (-21) |  |
60484 | Technic Beam 3 x 3 T-Shape Thick | 5 | 554 |
| 256 (+107) |  |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 15 | 549 |
| 257 (-29) |  |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 545 |
| 258 (+32) |  |
18649 | Plate Special 1 x 2 with Handles on Ends | 4 | 543 |
| 259 (-2) |  |
3659 | Brick Arch 1 x 4 | 14 | 536 |
| 260 (-7) |  |
14716 | Brick 1 x 1 x 3 | 11 | 530 |
| 261 (-6) |  |
3030 | Plate 4 x 10 | 15 | 524 |
| 262 (+26) |  |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 522 |
| 263 (-24) |  |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 20 | 521 |
| 264 (-21) |  |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 16 | 519 |
| 265 (+8) |  |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 19 | 519 |
| 266 (+32) |  |
24309 | Slope Curved 3 x 2 No Studs | 11 | 516 |
| 267 (-6) |  |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 6 | 514 |
| 268 (+36) |  |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 9 | 514 |
| 269 (-37) |  |
3680 | Turntable 2 x 2 Plate, Base | 4 | 513 |
| 270 (-18) |  |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 16 | 512 |
| 271 (-33) |  |
3709 | Technic Plate 2 x 4 [3 Holes] | 8 | 511 |
| 272 (+12) |  |
13547 | Slope Curved 4 x 1 Inverted | 19 | 508 |
| 273 (-17) |  |
6589 | Technic Gear 12 Tooth Bevel | 2 | 506 |
| 274 (-24) |  |
6112 | 1×12 Brick | 12 | 505 |
| 275 (-24) |  |
64647 | Headwear Accessory Plume / Feather Triple Point | 9 | 502 |
| 276 (+36) |  |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 12 | 501 |
| 277 (-28) |  |
3702 | Technic Brick 1 x 8 [7 Holes] | 7 | 500 |
| 278 (-10) |  |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 13 | 493 |
| 279 (+1) |  |
88930 | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 19 | 489 |
| 280 (-13) |  |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 8 | 488 |
| 281 (-5) |  |
92950 | Brick Arch 1 x 6 Raised Arch | 14 | 485 |
| 282 (-3) |  |
4510 | Plate Special 1 x 8 with Door Rail | 9 | 485 |
| 283 (-72) |  |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 483 |
| 284 (-7) |  |
60471 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side | 5 | 479 |
| 285 (+12) |  |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 9 | 479 |
| 286 (-5) |  |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 11 | 478 |
| 287 (+13) |  |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 4 | 475 |
| 288 (+143) |  |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 6 | 475 |
| 289 (+68) |  |
22961 | Technic Pin Connector Hub with 1 Axle | 6 | 475 |
| 290 (-30) |  |
15303 | Spring Shooter Ammunition 8L | 10 | 475 |
| 291 (-17) |  |
60849 | Equipment Hose Nozzle with Side String Hole Simplified | 4 | 473 |
| 292 (-5) |  |
59349 | Panel 1 x 6 x 5 | 17 | 473 |
| 293 (+269) |  |
32803 | Slope Curved 2 x 2 Inverted | 7 | 472 |
| 294 (-9) |  |
96874 | Brick and Axle Separator v2.0 | 3 | 471 |
| 295 (-26) |  |
4216 | Brick Special 1 x 2 with Groove | 9 | 470 |
| 296 (-38) |  |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise | 3 | 469 |
| 297 (-3) |  |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 5 | 468 |
| 298 (-9) |  |
3703 | Technic Brick 1 x 16 [15 Holes] | 8 | 465 |
| 299 (-29) |  |
6232 | Brick Special 2 x 2 with Pin and Axle Hole | 7 | 461 |
| 300 (+303) |  |
32828 | Plate Round 1 x 1 with Hole and Horizontal Bar | 3 | 458 |
| 301 (-19) |  |
60593 | Window 1 x 2 x 3 Flat Front | 12 | 457 |
| 302 (+85) |  |
22385 | Tile Special 2 x 3 Pentagonal | 20 | 457 |
| 303 (-56) |  |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 5 | 454 |
| 304 (-11) |  |
3684c | Slope 75┬░ 2 x 2 x 3 [Hollow Studs] | 16 | 453 |
| 305 (+22) |  |
15403 | Plate Special 1 x 2 with Mini Blaster | 4 | 452 |
| 306 (-42) |  |
6111 | 1×10 Brick | 11 | 452 |
| 307 (-24) |  |
3829c01 | Vehicle Steering Stand 1 x 2 with Black Steering Wheel | 6 | 449 |
| 308 (-60) |  |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 12 | 444 |
| 309 (-23) |  |
3007 | 2×8 Brick | 10 | 441 |
| 310 (+19) |  |
3029 | Plate 4 x 12 | 14 | 440 |
| 311 (+271) |  |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder | 10 | 437 |
| 312 (-20) |  |
2921 | Brick Special 1 x 1 with Handle | 10 | 432 |
| 313 (-7) |  |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 6 | 429 |
| 314 (-48) |  |
4079b | Minifig Seat 2 x 2 with Center Sprue Mark | 11 | 429 |
| 315 (-53) |  |
3045 | Slope 45┬░ 2 x 2 Double Convex | 17 | 428 |
| 316 (+38) |  |
3033 | Plate 6 x 10 | 14 | 424 |
| 317 (-6) |  |
91988 | 2×14 Plate | 8 | 423 |
| 318 (-55) |  |
2458 | Brick Special 1 x 2 with Pin | 7 | 420 |
| 319 (-23) |  |
59426 | Technic Axle 5.5 With Stop [Rounded Short End] | 1 | 418 |
| 320 (-29) |  |
43857 | Technic Beam 1 x 2 Thick | 7 | 417 |
| 321 (-5) |  |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 9 | 417 |
| 322 (-44) |  |
2419 | Wedge Plate 3 x 6 Cut Corners | 14 | 417 |
| 323 (-21) |  |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 6 | 414 |
| 324 (+71) |  |
18653 | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 16 | 413 |
| 325 (-20) |  |
41678 | Technic Axle and Pin Connector Perpendicular Double Split | 5 | 412 |
| 326 (-11) |  |
43888 | Support 1 x 1 x 6 Solid Pillar | 13 | 412 |
| 327 (-19) |  |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 17 | 409 |
| 328 (-21) |  |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 14 | 406 |
| 329 (-16) |  |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 8 | 403 |
| 330 (-29) |  |
30602 | Slope Curved 2 x 2 with Lip, No Studs | 21 | 403 |
| 331 (+228) |  |
29120 | Slope Curved 2 x 1 with Stud Notch Left | 14 | 403 |
| 332 (+244) |  |
29119 | Slope Curved 2 x 1 with Stud Notch Right | 14 | 401 |
| 333 (+207) |  |
2417 | Plant, Leaves 6 x 5 | 10 | 401 |
| 334 (-35) |  |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 4 | 399 |
| 335 (+103) |  |
24307 | Wedge Plate 2 x 2 Right | 14 | 393 |
| 336 (+66) |  |
18671 | Bracket 3 x 2 x 1 1/3 | 8 | 390 |
| 337 (+10) |  |
14696 | Technic Link, Reinforced, with Beveled Edge | 1 | 382 |
| 338 (-10) |  |
3895 | Technic Brick 1 x 12 [11 Holes] | 8 | 379 |
| 339 (-18) |  |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 379 |
| 340 (+4) |  |
2465 | 1×16 Brick | 11 | 377 |
| 341 (-8) |  |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 8 | 376 |
| 342 (-22) |  |
3899 | Equipment Cup / Mug [Plain] | 6 | 375 |
| 343 (+107) |  |
24299 | Wedge Plate 2 x 2 Left | 14 | 375 |
| 344 (-30) |  |
3028 | Plate 6 x 12 | 17 | 375 |
| 345 (-42) |  |
2653 | Brick Special 1 x 4 with Groove | 2 | 374 |
| 346 (-1) |  |
6126b | Wave / Flame Rounded with Base Rim | 5 | 370 |
| 347 (+15) |  |
6180 | Tile Special 4 x 6 with Studs on Edges | 14 | 370 |
| 348 (-25) |  |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 370 |
| 349 (-31) |  |
2460 | Tile Special 2 x 2 with Pin | 6 | 369 |
| 350 (-20) |  |
2736 | Technic Axle Towball | 1 | 367 |
| 351 (-42) |  |
42610 | Wheel 11 x 8 with Center Groove | 1 | 365 |
| 352 (-2) |  |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 7 | 364 |
| 353 (-18) |  |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 5 | 362 |
| 354 (-22) |  |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 14 | 359 |
| 355 (+61) |  |
18980 | Plate Round Corner 2 x 6 Double | 15 | 357 |
| 356 (-25) |  |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 3 | 356 |
| 357 (+566) |  |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 6 | 352 |
| 358 (-3) |  |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 7 | 351 |
| 359 (-17) |  |
2447 | Headwear Accessory Visor For Standard Helmet | 5 | 350 |
| 360 (+45) |  |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 11 | 350 |
| 361 (-35) |  |
32291 | Technic Axle and Pin Connector Perpendicular Double | 6 | 349 |
| 362 (+2) |  |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 11 | 349 |
| 363 (+15) |  |
13731 | Brick Curved 10 x 1 [Symmetric Inside Ridges] | 19 | 349 |
| 364 (-25) |  |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 349 |
| 365 (-13) |  |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 10 | 348 |
| 366 (-29) |  |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 15 | 345 |
| 367 (-18) |  |
92438 | Plate 8 x 16 | 22 | 343 |
| 368 (+68) |  |
23443 | 3.2 SHAFT W/3.2 HOLE | 6 | 341 |
| 369 (+112) |  |
11253 | Sports Roller Skate | 8 | 340 |
| 370 (-14) |  |
43898 | Dish 3 x 3 Inverted [Radar] | 18 | 339 |
| 371 (+4) |  |
88292 | Brick Arch 1 x 3 x 2 | 11 | 339 |
| 372 (+11) |  |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 10 | 338 |
| 373 (-27) |  |
30553 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole | 4 | 335 |
| 374 (-33) |  |
41539 | Plate 8 x 8 | 17 | 335 |
| 375 (-53) |  |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 5 | 333 |
| 376 (+43) |  |
98100 | Brick Round 2 x 2 Truncated Cone | 7 | 333 |
| 377 (-43) |  |
30236 | Brick Special 1 x 2 with Handle | 7 | 332 |
| 378 (-19) |  |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 331 |
| 379 (+44) |  |
11609 | Star with Stud Holder | 5 | 330 |
| 380 (-32) |  |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 329 |
| 381 (-15) |  |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 6 | 329 |
| 382 (-72) |  |
2476 | Plate Special 2 x 2 with Pin on Bottom | 3 | 328 |
| 383 (-14) |  |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 6 | 327 |
| 384 (-11) |  |
55013 | Technic Axle 8 with Stop | 1 | 327 |
| 385 (+101) |  |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 5 | 324 |
| 386 (+15) |  |
11213 | Plate Round 6 x 6 with Hole | 14 | 322 |
| 387 (-26) |  |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 321 |
| 388 (-48) |  |
4488 | Plate Special 2 x 2 with Wheel Holder | 2 | 317 |
| 389 (+139) |  |
27507 | Tile 4 x 4 Macaroni | 16 | 312 |
| 390 (-22) |  |
3707 | Technic Axle 8 | 2 | 311 |
| 391 (+53) |  |
6003 | Plate Round Corner 6 x 6 | 13 | 309 |
| 392 (-21) |  |
94925 | Technic Gear 16 Tooth Reinforced [New Style] | 1 | 309 |
| 393 (+50) |  |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 307 |
| 394 (+193) |  |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow(2 x 2 x 1) and Axle Holes(Crossholes) at each end | 8 | 305 |
| 395 (-13) |  |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 6 | 304 |
| 396 (-20) |  |
60485 | Technic Axle 9 | 2 | 303 |
| 397 (+15) |  |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 303 |
| 398 (-45) |  |
3633 | Fence 1 x 4 x 1 | 7 | 303 |
| 399 (-34) |  |
16770 | Barb Large (Claw, Talon) with Clip | 11 | 303 |
| 400 (-28) |  |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 10 | 302 |
| 401 (-31) |  |
15400 | Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 1 | 302 |
| 402 (-28) |  |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 301 |
| 403 (-65) |  |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 9 | 301 |
| 404 (-27) |  |
4600 | Plate Special 2 x 2 with Wheel Holders | 3 | 299 |
| 405 (-21) |  |
4865a | Panel 1 x 2 x 1 [Square Corners] | 12 | 299 |
| 406 (-63) |  |
3679 | Turntable 2 x 2 Plate – Top | 1 | 299 |
| 407 (+44) |  |
89522 | Horn (Unicorn) | 12 | 298 |
| 408 (+53) |  |
22888 | Plate Round Corner 4 x 8 Double | 19 | 297 |
| 409 (-85) |  |
50745 | Mudguard 4 x 2 1/2 x 2 with Arch Round | 16 | 297 |
| 410 (-10) |  |
2496 | Wheel Skateboard / Trolley | 2 | 296 |
| 411 (-30) |  |
32056 | Technic Beam 3 x 3 L-Shape Thin | 6 | 296 |
| 412 (+27) |  |
87609 | Plate Special 2 x 6 x 2/3 [Four Studs on Side] | 14 | 296 |
| 413 (-55) |  |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 8 | 294 |
| 414 (-23) |  |
60476 | Brick Special 1 x 1 with Clip Horizontal | 3 | 293 |
| 415 (-21) |  |
50304 | Wedge Plate 8 x 3 Right | 14 | 292 |
| 416 (-28) |  |
50305 | Wedge Plate 8 x 3 Left | 14 | 291 |
| 417 (-37) |  |
32063 | Technic Beam 1 x 6 Thin | 4 | 289 |
| 418 (+17) |  |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 7 | 287 |
| 419 (-52) |  |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 10 | 286 |
| 420 (-30) |  |
30363 | Slope 18┬░ 4 x 2 | 11 | 284 |
| 421 (-32) |  |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | 7 | 283 |
| 422 (-1) |  |
87081 | Brick Round 4 x 4 [Centre Hole] | 9 | 282 |
| 423 (-72) |  |
32001 | Technic Plate 2 x 6 [5 Holes] | 6 | 280 |
| 424 (-38) |  |
30165 | Brick Curved 2 x 2 with Two Top Studs | 15 | 280 |
| 425 (-32) |  |
64782 | Technic Panel 1 x 5 x 11 | 12 | 280 |
| 426 (+32) |  |
64179 | Technic Beam 5 x 7 Open Center Thick | 3 | 276 |
| 427 (-30) |  |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 13 | 276 |
| 428 (+19) |  |
13548 | Wedge 2 x 2 (Slope 45┬░ Corner) | 9 | 276 |
| 429 (+59) |  |
15458 | Technic Panel 3 X 11 x 1 | 11 | 273 |
| 430 (-4) |  |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 9 | 273 |
| 431 (-46) |  |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 10 | 271 |
| 432 (-3) |  |
32474 | Technic Ball Joint | 12 | 270 |
| 433 (-26) |  |
2343 | Equipment Goblet | 6 | 268 |
| 434 — |  |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Ball | 1 | 264 |
| 435 (-31) |  |
98282 | Mudguard 4 x 2 1/2 x 1 with Arch Round | 9 | 263 |
| 436 (+48) |  |
2723 | Technic Disk 3 x 3 | 3 | 260 |
| 437 (-22) |  |
3942c | Cone 2 x 2 x 2 with Completely Open Stud | 15 | 260 |
| 438 (-39) |  |
92907 | Technic Axle and Pin Connector Perpendicular Split | 4 | 258 |
| 439 (-26) |  |
3831 | Hinge Brick 1 x 4 [Lower] | 9 | 258 |
| 440 (-26) |  |
3830 | Hinge Brick 1 x 4 [Upper] | 9 | 258 |
| 441 (-13) |  |
30552 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 3 | 256 |
| 442 (+25) |  |
6106 | Wedge Plate 6 x 6 Cut Corner | 9 | 256 |
| 443 (-32) |  |
57895 | Glass for Window 1 x 4 x 6 | 8 | 256 |
| 444 (-14) |  |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 255 |
| 445 (-18) |  |
15391 | Weapon Gun / Blaster / Shooter Mini | 6 | 253 |
| 446 (+20) |  |
4490 | Brick Arch 1 x 3 | 8 | 253 |
| 447 (-41) |  |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 252 |
| 448 (+748) |  |
36841 | Bracket 1 x 1 – 1 x 1 | 7 | 252 |
| 449 (+40) |  |
87414 | Tyre Offset Tread Small with Band around Center of Tread | 1 | 250 |
| 450 (-18) |  |
22667 | Plant, Cherries | 3 | 249 |
| 451 (-48) |  |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 2 | 246 |
| 452 (-54) |  |
30162 | Equipment Binoculars | 4 | 246 |
| 453 (+2) |  |
47398 | Wedge Plate 12 x 3 Right | 10 | 246 |
| 454 (-58) |  |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 6 | 245 |
| 455 (-31) |  |
30031 | Minifig Handlebars | 6 | 244 |
| 456 (+40) |  |
15456 | Plate Special 2 x 2 with Towball and Hole | 2 | 242 |
| 457 (-16) |  |
11610 | Food Ice Cream Cone | 8 | 242 |
| 458 (+2) |  |
47456 | Brick Wedged 2 x 3 x 2/3 Two Studs, Wing End | 17 | 242 |
| 459 (-7) |  |
41669 | Technic Tooth 1 x 3 with Axle Hole | 17 | 242 |
| 460 (-18) |  |
30157 | Plate Special 2 x 4 with Pins | 3 | 240 |
| 461 (-5) |  |
46212 | Brick 1 x 2 x 5 without Side Supports | 7 | 240 |
| 462 (+29) |  |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 4 | 238 |
| 463 (+24) |  |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 13 | 238 |
| 464 (-54) |  |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 238 |
| 465 (+56) |  |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 15 | 237 |
| 466 (-20) |  |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 4 | 236 |
| 467 (-34) |  |
32072 | Technic Knob Wheel | 2 | 235 |
| 468 (-28) |  |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 10 | 232 |
| 469 (+1) |  |
3297 | Slope 33┬░ 3 x 4 | 11 | 230 |
| 470 (+10) |  |
2639 | 4×4 Plate, Corner | 3 | 228 |
| 471 (-63) |  |
92690 | Bar 1L with Top Stud and Two Side Studs | 4 | 227 |
| 472 (+13) |  |
47397 | Wedge Plate 12 x 3 Left | 10 | 225 |
| 473 (+42) |  |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 7 | 224 |
| 474 (-15) |  |
24375 | Rubber Technic Tread Attachment | 2 | 222 |
| 475 (+17) |  |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 2 | 222 |
| 476 (+18) |  |
16577 | Brick Arch 1 x 8 x 2 Raised | 10 | 222 |
| 477 (+24) |  |
99008 | Technic Axle 4 with Centre Stop | 1 | 221 |
| 478 (+26) |  |
61485 | Turntable 4 x 4 Square Base, Locking | 3 | 218 |
| 479 (-31) |  |
74261 | Hero Factory Joint Extender [High Friction] | 1 | 218 |
| 480 (-6) |  |
30145 | Brick 2 x 2 x 3 | 9 | 217 |
| 481 (-27) |  |
3038 | Slope 45┬░ 2 x 3 | 6 | 216 |
| 482 (-7) |  |
33243 | Brick Curved 1 x 3 x 2 | 17 | 216 |
| 483 (-20) |  |
3708 | Technic Axle 12 | 2 | 215 |
| 484 (-47) |  |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 215 |
| 485 (-3) |  |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 12 | 215 |
| 486 (-66) |  |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 11 | 214 |
| 487 (-42) |  |
3738 | Technic Plate 2 x 8 [7 Holes] | 7 | 213 |
| 488 (+132) |  |
22890 | Plate Special 1 x 2 with End Towball | 1 | 212 |
| 489 (-11) |  |
6157 | Plate Special 2 x 2 with Wheels Holder Wide | 3 | 211 |
| 490 (+292) |  |
27261 | Plate Special 2 x 3 with rocks | 6 | 210 |
| 491 (+109) |  |
24855 | Plant, Stem with Bottom Pin | 2 | 206 |
| 492 (-15) |  |
32059 | Wedge Plate 4 x 6 Cut Corners | 16 | 204 |
| 493 (+30) |  |
30099 | Brick Arch 1 x 5 x 4 Inverted | 12 | 203 |
| 494 (-23) |  |
33299a | Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank | 3 | 202 |
| 495 (+107) |  |
36752a | Equipment Wand [Individual] | 7 | 202 |
| 496 (-28) |  |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 201 |
| 497 (+2) |  |
57909 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 3 | 199 |
| 498 (+36) |  |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 199 |
| 499 (-27) |  |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 17 | 199 |
| 500 (+88) |  |
17485 | Brick Round 2 x 2 with Pin Holes | 8 | 199 |
| 501 (+38) |  |
85943 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 2 | 198 |
| 502 (+27) |  |
18977 | Tyre 24 x 12 Low Profile | 1 | 198 |
| 503 (-5) |  |
3743 | Technic Gear Rack 1 x 4 | 3 | 197 |
| 504 (-55) |  |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 8 | 197 |
| 505 (+6) |  |
60616 | Door 1 x 4 x 6 Smooth with Square Handle Plinth | 11 | 197 |
| 506 (-33) |  |
42022 | Brick Curved 6 x 1 | 14 | 197 |
| 507 (-128) |  |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 196 |
| 508 (-5) |  |
6215 | Brick Curved 2 x 3 with Curved Top | 13 | 196 |
| 509 (+1) |  |
3006 | 2×10 Brick | 9 | 196 |
| 510 (-1) |  |
91405 | Plate 16 x 16 | 17 | 195 |
| 511 (-9) |  |
61482 | Equipment Handcuffs | 3 | 194 |
| 512 (+7) |  |
30044 | Window 1 x 2 x 2 2/3 with Rounded Top | 10 | 194 |
| 513 (+41) |  |
40344 | Technic Brick 4 x 6 Open Center | 3 | 193 |
| 514 (+46) |  |
15209 | Plate 1 x 2 Special with Two Vertical Teeth | 6 | 192 |
| 515 (-51) |  |
11618 | Headwear Accessory Bow with Heart, Long Ribbon and Pin | 5 | 192 |
| 516 (+21) |  |
4175 | Plate Special 1 x 2 with Ladder | 8 | 191 |
| 517 — |  |
3737 | Technic Axle 10 | 2 | 190 |
| 518 (-13) |  |
92338 | Chain 5 links | 5 | 190 |
| 519 (-97) |  |
3742 | Plant, Flower – Small | 5 | 190 |
| 520 (-102) |  |
90640 | Large Figure Limb Cover, Size 4, Armor with Ball Joint Socket | 24 | 190 |
| 521 (-45) |  |
42023 | Brick Curved 6 x 1 Inverted | 10 | 189 |
| 522 (-6) |  |
95344 | Bucket 1 x 1 x 1 Handle | 4 | 188 |
| 523 (-33) |  |
6191 | Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top with Raised Inside Support | 19 | 188 |
| 524 (-71) |  |
55982 | Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes | 4 | 186 |
| 525 (+1) |  |
4345 | Box 2 x 2 x 2 [Hollow Studs] | 6 | 186 |
| 526 (+57) |  |
33078 | Food Hot Dog / Sausage | 6 | 186 |
| 527 (-30) |  |
44375 | Dish 6 x 6 Inverted (Radar) with Hollow Studs | 17 | 185 |
| 528 (+28) |  |
11208 | Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes | 5 | 184 |
| 529 (+7) |  |
2655 | Plate, Round 2 x 2 Thin with Wheel Holder | 1 | 184 |
| 530 (+92) |  |
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | 11 | 183 |
| 531 (-11) |  |
30526 | Brick Special 1 x 2 with 2 Pins | 3 | 182 |
| 532 (-25) |  |
60608 | Window 1 x 2 x 3 Pane with Thick Corner Tabs | 5 | 181 |
| 533 (-21) |  |
98585 | Hero Factory Weapon Barrel with 2 Pin Holes and 3 Axle Holes | 7 | 181 |
| 534 (-4) |  |
4346 | Box 2 x 2 x 2 Door with Slot | 6 | 180 |
| 535 (-22) |  |
58247 | Weapon Gun / Blaster Short (Star Wars) | 4 | 179 |
| 536 (-79) |  |
42446 | Neckwear Bracket [One Stud] | 6 | 178 |
| 537 (+9) |  |
40379 | Dinosaur Tail End Section | 13 | 178 |
| 538 (-45) |  |
3960 | Dish 4 x 4 Inverted [Radar] | 17 | 177 |
| 539 (-39) |  |
92410 | Cupboard 2 x 3 x 2 with Solid Studs | 10 | 177 |
| 540 (-15) |  |
92738 | Weapon Gun / Blaster Small (Star Wars) | 2 | 176 |
| 541 (+10) |  |
11946 | Technic Panel Fairing #21 Very Small Smooth, Side B | 19 | 175 |
| 542 (+376) |  |
37352 | Brick Curved 1 x 2 x 1 No Studs | 9 | 174 |
| 543 (-29) |  |
76766 | Bracket 5 x 2 x 2 1/3 | 4 | 172 |
| 544 (-6) |  |
98721 | Weapon Batarang | 4 | 172 |
| 545 (-50) |  |
32187 | Technic Driving Ring Extension | 3 | 171 |
| 546 (+12) |  |
11947 | Technic Panel Fairing #22 Very Small Smooth, Side A | 19 | 171 |
| 547 (-16) |  |
4006 | Tool Screwdriver and Spanner / Wrench | 2 | 169 |
| 548 (-26) |  |
60219 | Slope Inverted 45┬░ 6 x 4 Double with 4 x 4 Cutout and 3 Holes | 10 | 168 |
| 549 (+24) |  |
18946 | Technic Gear 16 Tooth with Clutch on Both Sides | 1 | 167 |
| 550 (-3) |  |
90258 | Brick Special 2 x 2 with Grooves and Axle Hole | 1 | 166 |
| 551 (+4) |  |
64648 | Fish [Anti-Stud Mouth] | 5 | 165 |
| 552 (+28) |  |
14718 | Panel 1 x 4 x 2 with Side Supports – Hollow Studs | 9 | 165 |
| 553 (-29) |  |
19220 | Equipment Radio [Extended Handle, Expanded Speaker Grille] | 2 | 164 |
| 554 (-9) |  |
43710 | Wedge 4 x 2 Triple Left | 18 | 164 |
| 555 (+20) |  |
6182 | Brick Arch 1 x 4 x 2 | 11 | 163 |
| 556 (+105) |  |
27940 | BEAM 1 with 2 CROSS AXLE [180 DEG] | 1 | 163 |
| 557 (+202) |  |
26287 | Technic Driving Ring Connector Smooth | 2 | 162 |
| 558 (-8) |  |
93160 | Dog Bone [Short] | 1 | 162 |
| 559 (-27) |  |
15092 | Plate 2 x 2 with 2 Pins | 1 | 162 |
| 560 (+85) |  |
21445 | Plate Special 1 x 2 with Wheel Holder | 2 | 161 |
| 561 (-53) |  |
2569 | Antenna Whip 8H | 5 | 161 |
| 562 (-21) |  |
40345 | Technic Brick 6 x 8 with Open Center 4 x 6 | 3 | 160 |
| 563 (+353) |  |
35464 | Slope Double 45┬░ 1 x 1 | 4 | 159 |
| 564 (-12) |  |
3046 | Slope 45┬░ 2 x 2 Double Concave | 6 | 159 |
| 565 (+12) |  |
4218 | Garage Roller Door Section without Handle | 5 | 159 |
| 566 (-101) |  |
98286 | Hinge Plate 2 x 4 with Pin Hole – Top | 2 | 158 |
| 567 (-2) |  |
61780 | Container Box 2 x 2 x 2 – Top Opening | 4 | 158 |
| 568 (-20) |  |
4735 | Bar 1 x 3 [Clip / Anti-Stud] | 2 | 157 |
| 569 (-5) |  |
43713 | Wedge 6 x 4 Inverted Curved | 15 | 157 |
| 570 (+105) |  |
25893 | Plate Round 1 x 1 with Open Stud and Bar on Underside | 1 | 156 |
| 571 (+45) |  |
44568 | Hinge Plate 1 x 4 Locking Dual 1 Finger | 2 | 155 |
| 572 (-30) |  |
4595 | Brick Special 1 x 2 x 2/3 with Studs on Sides | 3 | 155 |
| 573 (-156) |  |
93571 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | 3 | 154 |
| 574 (+23) |  |
14720 | Technic Beam 3 x 5 Thick [90┬░ Offset Centre Beam Holes] | 3 | 154 |
| 575 (-4) |  |
90195 | Window 1 x 2 x 2 Castle | 5 | 154 |
| 576 (-58) |  |
41854 | Mudguard 2 x 4 with Flared Wings | 14 | 153 |
| 577 (-44) |  |
52031 | Slope Curved 4 x 6 x 2/3 Triple Curved with 4 Studs | 18 | 153 |
| 578 (+16) |  |
18948 | Technic Driving Ring Connector | 1 | 153 |
| 579 (+63) |  |
3648 | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | 1 | 153 |
| 580 (-31) |  |
2462 | Facet 3 x 3 | 4 | 152 |
| 581 (-13) |  |
92099 | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 4 | 152 |
| 582 (+9) |  |
11209 | Tyre 21 x 9.9 | 1 | 152 |
| 583 (+31) |  |
4590 | Plate Special 1 x 4 Offset | 5 | 150 |
| 584 (+21) |  |
87618 | Bar 5L with Handle (Friction Ram) | 3 | 149 |
| 585 (-123) |  |
3741 | Plant, Flower Stem | 4 | 149 |
| 586 (+6) |  |
30340 | Equipment Flotation Ring [Life Preserver] | 7 | 149 |
| 587 (+76) |  |
98834 | Vehicle, Spoiler 2 x 4 with Handle | 10 | 149 |
| 588 (-16) |  |
32138 | Technic Pin Double with Axle Hole | 2 | 148 |
| 589 (+29) |  |
93058b | Weapon Throwing Star / Shuriken with Textured Grips | 2 | 148 |
| 590 (-23) |  |
6259 | Cylinder Half 2 x 4 x 4 | 7 | 148 |
| 591 (+32) |  |
30355 | Wedge Plate 6 x 12 Left | 8 | 147 |
| 592 (-39) |  |
62113 | Bar 1 x 4 x 3 [End Tabs] | 6 | 146 |
| 593 (+38) |  |
64225 | Wedge Curved 4 x 3 [No Studs] | 14 | 146 |
| 594 (+7) |  |
45590 | Technic Axle Connector Double Flexible [Rubber] | 1 | 146 |
| 595 (+172) |  |
32606 | Plant, Minifig Accessory Flower with 7 Thick Petals and Pin | 3 | 145 |
| 596 (+9403) |  |
49307 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 7 | 145 |
| 597 (-27) |  |
3676 | Slope Inverted 45┬░ 2 x 2 Double Convex | 11 | 145 |
| 598 (-129) |  |
90609 | Large Figure Skeletal, Limb, 5L with Ball Joint on Axle and Ball Socket | 7 | 144 |
| 599 (+33) |  |
30356 | Wedge Plate 6 x 12 Right | 8 | 144 |
| 600 (-21) |  |
72454 | Slope Inverted 45┬░ 4 x 4 Double | 8 | 144 |
| 601 (-74) |  |
98139 | Weapon Sai | 3 | 143 |
| 602 (+36) |  |
15397 | Plate 3 x 3 Cross | 7 | 142 |
| 603 (+36) |  |
47458 | Brick Wedged 1 x 2 x 2/3 No Studs, Wing End | 8 | 142 |
| 604 (+6) |  |
30586 | Plate Special 2 x 8 with Door Rail | 5 | 141 |
| 605 (-10) |  |
64727 | Weapon Spike Flexible 3.5L | 8 | 141 |
| 606 (+5) |  |
88293 | Brick Round Corner 3 x 3 x 2 Dome Top | 14 | 141 |
| 607 (+23) |  |
85975 | Cone 1.17 x 1.17 x 2/3 (Fez) | 8 | 140 |
| 608 (-64) |  |
43711 | Wedge 4 x 2 Triple Right | 18 | 140 |
| 609 (-48) |  |
3027 | Plate 6 x 16 | 11 | 140 |
| 610 (-4) |  |
32555 | Technic Brick 5 x 5 Right Angle (1 x 4 – 1 x 4) | 2 | 139 |
| 611 (-45) |  |
4349 | Equipment, Weapon, Loudhailer / Blaster / Space Gun | 3 | 139 |
| 612 (+16) |  |
3685 | Slope 75┬░ 2 x 2 x 3 Double Convex | 8 | 139 |
| 613 (-15) |  |
92409 | Tyre 17.5 x 6 with Shallow Staggered Treads | 1 | 139 |
| 614 (-57) |  |
30562 | Panel 4 x 4 x 6 Quarter Cylinder | 8 | 138 |
| 615 (+55) |  |
64867 | Wedge 4 x 4 Fractured Polygon Top | 8 | 137 |
| 616 (+111) |  |
85941 | Cylinder Half 2 x 4 x 5 with 1 x 2 cutout | 6 | 136 |
| 617 (-54) |  |
93575 | Large Figure Hand, Fist with Axle Hole | 11 | 135 |
| 618 (-11) |  |
60169 | Minifig Chain 16L | 7 | 133 |
| 619 (-29) |  |
30663 | Vehicle Steering Wheel Small, 2 x 2 [Reinforced] | 2 | 132 |
| 620 (-31) |  |
91501 | Panel 2 x 2 x 1 Corner | 4 | 132 |
| 621 (+32) |  |
3049 | Slope 45┬░ 2 x 1 Double / Inverted with Bottom Tube | 9 | 132 |
| 622 (-79) |  |
30385 | Rock 1 x 1 Crystal 5 Point | 10 | 132 |
| 623 (-6) |  |
61903 | Technic Universal Joint 3L [Complete Assembly] | 1 | 132 |
| 624 (-38) |  |
2825 | Technic Beam 1 x 4 Thin with Stud Connector | 4 | 130 |
| 625 (-47) |  |
2850 | Technic Engine Cylinder with Side Slots | 1 | 130 |
| 626 (-2) |  |
30089 | Equipment Camera Handheld with Right-Aligned Viewfinder | 3 | 129 |
| 627 (-31) |  |
6020 | Bar 7 x 3 with Double Clips (Ladder) | 5 | 129 |
| 628 (-24) |  |
61254 | Tyre Offset Tread with Center Band 23 x7 | 1 | 129 |
| 629 (-8) |  |
48169 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 3 | 128 |
| 630 (+63) |  |
87407 | Technic Gear 20 Tooth Bevel with Pin Hole | 1 | 126 |
| 631 (-46) |  |
2852 | Technic Engine Connecting Rod | 1 | 126 |
| 632 (+19) |  |
48171 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 2 | 125 |
| 633 (+71) |  |
13564 | Cattle Horn – Long | 5 | 125 |
| 634 (+48) |  |
24482 | Weapon Spear Tip with Fins | 5 | 125 |
| 635 (-51) |  |
2851 | Technic Engine Piston Round | 1 | 125 |
| 636 (+55) |  |
93594 | Wheel 11 x 6 with Smooth Hubcap | 1 | 124 |
| 637 (+9) |  |
11291 | Wedge 3 x 4 x 2/3 Cutout | 12 | 123 |
| 638 (+9361) |  |
49731 | Technic Pin without Friction Ridges Lengthwise and Foil Connector | 1 | 123 |
| 639 (+85) |  |
6254 | Food Ice Cream Scoops | 5 | 122 |
| 640 (+144) |  |
90540 | Bar 3L, with Handle, Stop Ring and Side Stops (Minifig Ski Pole) | 5 | 122 |
| 641 (-135) |  |
92220 | Large Figure Weapon Claw, with Clip | 7 | 122 |
| 642 (-29) |  |
60208 | Wheel 31 x 15 Technic | 8 | 122 |
| 643 (-108) |  |
50254 | Train Wheel Small, hole notched for wheels holder pin | 3 | 121 |
| 644 (+27) |  |
6187 | Bar 1 x 4 x 2 | 7 | 121 |
| 645 (-71) |  |
45677 | Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 19 | 121 |
| 646 (+93) |  |
22484 | Bar 2L with Towball | 3 | 120 |
| 647 (-35) |  |
56891 | Tyre 37 x 18R | 1 | 120 |
| 648 (+210) |  |
22889 | Slope Inverted 45┬░ 6 x 2 Double with 2 x 4 Cutout | 10 | 119 |
| 649 (+34) |  |
60603 | Glass for Window 1 x 4 x 3 – Opening | 3 | 118 |
| 650 (+28) |  |
18853 | Headwear Accessory Flower with Pointed Petals and Pin | 5 | 118 |
| 651 (+118) |  |
2739 | Technic Link 1 x 6 without Stoppers | 2 | 117 |
| 652 (+29) |  |
18974 | Vehicle Mudguard 4 x 2 1/2 x 2 1/3 with Arch Round | 12 | 117 |
| 653 (-54) |  |
41532 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin | 1 | 117 |
| 654 (-17) |  |
93555 | Sports Ice Skate | 2 | 116 |
| 655 (-21) |  |
60212 | Mudguard 2 x 4 [Studded] | 8 | 116 |
| 656 (+97) |  |
2599 | Minifig Footwear Flipper [Thick] | 6 | 115 |
| 657 (-64) |  |
60583 | Brick Special 1 x 1 x 3 with 2 Clips Vertical [Solid Stud, Thick U Clips] | 5 | 115 |
| 658 (+68) |  |
3675 | Slope 33┬░ 3 x 3 Double Convex | 9 | 115 |
| 659 (+3) |  |
30504 | Wedge Plate 8 x 8 Cut Corner | 9 | 114 |
| 660 (-24) |  |
50861 | Tyre 21 x 6 City Motorcycle | 1 | 114 |
| 661 (+80) |  |
18854 | Headwear Accessory Glasses with Pin | 2 | 113 |
| 662 (-2) |  |
64448 | Support 1 x 6 x 5 Girder Rectangular | 6 | 113 |
| 663 (-54) |  |
58090 | Tyre 30.4 x 14 VR Solid | 1 | 113 |
| 664 (+5) |  |
47847 | Rock Panel 2 x 4 x 6 | 7 | 112 |
| 665 (+21) |  |
6249 | Brick Special 2 x 4 with Pins | 2 | 111 |
| 666 (+544) |  |
35787 | Tile 45┬░ Cut 2 x 2 | 6 | 111 |
| 667 (-19) |  |
10884 | Plant, Leaves 6 x 5 Swordleaf with Clip (thick open O clip) | 6 | 111 |
| 668 (-14) |  |
50862 | Wheel 15 x 6 City Motorcycle | 6 | 110 |
| 669 (+162) |  |
26599 | Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 2 | 109 |
| 670 (-37) |  |
55615 | Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins | 1 | 109 |
| 671 (+13) |  |
2853 | Technic Engine Crankshaft | 2 | 108 |
| 672 (+29) |  |
57520 | Technic Tread Sprocket Wheel Small | 3 | 108 |
| 673 (+55) |  |
60032 | Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass | 6 | 108 |
| 674 (+25) |  |
6222 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 6 | 108 |
| 675 (+154) |  |
28326 | Mudguard 3X4, W/ Plate, No. 1 | 7 | 108 |
| 676 (+61) |  |
6239 | Tail Shuttle | 17 | 108 |
| 677 (+35) |  |
60623 | Door 1 x 4 x 6 with 4 Panes and Stud Handle | 11 | 108 |
| 678 (-22) |  |
48933 | Wedge 4 x 4 Triple with Stud Notches | 12 | 108 |
| 679 (-53) |  |
89201 | Tyre 24 x 14 Shallow Tread (Tread Small Hub), Band Around Center of Tread | 1 | 108 |
| 680 (-39) |  |
32249 | Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin | 3 | 107 |
| 681 (+96) |  |
32126 | Technic Axle and Pin Connector Toggle Joint Smooth | 3 | 107 |
| 682 (-42) |  |
4536 | Cupboard 2 x 3 Drawer | 4 | 107 |
| 683 (+27) |  |
13349 | Wedge 4 x 4 Triple Inverted [4 Connections between Front Studs] | 7 | 107 |
| 684 (-55) |  |
47753 | Wedge Curved 4 x 4 No Top Studs | 16 | 107 |
| 685 (+69) |  |
27928 | Plate Special 2 x 2 Wedge, Center Stud, 1 x 1/2 Raised Tab | 2 | 106 |
| 686 (-51) |  |
88393 | Brick Special 1 x 2 x 5 with Groove | 4 | 106 |
| 687 (-15) |  |
30150 | Box / Crate with Handholds | 5 | 106 |
| 688 (+30) |  |
95347 | Support 2 x 2 x 10 Girder Triangular Vertical – Type 4 – 3 Posts, 3 Sections | 7 | 106 |
| 689 (+62) |  |
47755 | Wedge 4 x 3 Open with Cutout and Four Studs [Wheel Arch] | 11 | 106 |
| 690 (+105) |  |
56890 | Tyre 24 x 12 R Balloon | 1 | 106 |
| 691 (-66) |  |
32557 | Technic Pin Connector Perpendicular Long | 2 | 105 |
| 692 (+14) |  |
3956 | Bracket 2 x 2 – 2 x 2 | 4 | 105 |
| 693 (+30) |  |
99784 | Bar 1 x 12 with 1 x 2 Plate End with Hollow Studs and 1 x 1 Round Plate End | 5 | 105 |
| 694 (+9) |  |
50943 | Vehicle Air Scoop [2 x 2 Base] | 7 | 105 |
| 695 (+40) |  |
18975 | Brick Special 2 x 4 x 1 1/3 with Holes and 2 x 2 Cutout | 2 | 104 |
| 696 (-38) |  |
98397 | Minifig Handlebars with Angular Handles | 3 | 104 |
| 697 (+151) |  |
22886 | Brick 1 x 2 x 3 with Bottom Stud Holder | 5 | 104 |
| 698 (+9301) |  |
41682 | Tile Special 2×2 with 1×2 Vertical Plate | 7 | 104 |
| 699 (-42) |  |
3456 | Plate 6 x 14 | 7 | 104 |
| 700 (-81) |  |
53400 | Train, Track Plastic (RC Trains) Curved | 1 | 104 |
| 701 (-49) |  |
63082 | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 2 | 103 |
| 702 (-53) |  |
50923 | Technic Beam 1 x 2 with Ball Joint Angled | 3 | 103 |
| 703 (-14) |  |
30361 | Brick Round 2 x 2 x 2 Robot Body – without Bottom Axle Holder | 8 | 103 |
| 704 (+17) |  |
87408 | Technic Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes | 1 | 103 |
| 705 (-20) |  |
3464 | Wheel Centre Small with Stub Axles (Pulley Wheel) | 2 | 102 |
| 706 (+66) |  |
93593 | Wheel 11 x 6 with 8 Spokes | 4 | 102 |
| 707 (-52) |  |
4533 | Cupboard 2 x 3 x 2 Door | 5 | 102 |
| 708 (-10) |  |
2926 | Plate Special 1 x 4 with Wheels Holder | 1 | 102 |
| 709 (+21) |  |
33172 | Plant, Carrot | 2 | 100 |
| 710 (+131) |  |
19119 | Plant, Flower Stem with Bar and 6 Stems | 2 | 100 |
| 711 (-17) |  |
57585 | Technic Axle Connector Hub with 3 Axles at 120┬░ | 1 | 100 |
| 712 (+68) |  |
23948 | Technic Axle 11 | 2 | 99 |
| 713 (-234) |  |
11127 | Rock 1 x 1 Crystal 4 Point | 2 | 99 |
| 714 (+140) |  |
23950 | Panel 1 x 3 x 1 | 5 | 99 |
| 715 (-50) |  |
6583 | Plate Special 1 x 6 with Train Wagon End Fence | 5 | 99 |
| 716 (+22) |  |
30151b | Brick Round 2 x 2 x 1 2/3 Dome Top [Blocked Open Stud] | 5 | 98 |
| 717 (-58) |  |
95199 | Weapon Gun / Pistol Two Barrel | 3 | 97 |
| 718 (+74) |  |
3044 | Slope 45┬░ 2 x 1 Double without Bottom Pin | 4 | 97 |
| 719 (-111) |  |
98137 | Weapon Sword, Big Blade | 5 | 97 |
| 720 (-7) |  |
41747 | Wedge 6 x 2 Right | 13 | 97 |
| 721 (-31) |  |
55236 | Spiky Vine / Tail [aka Bionicle Spine] | 5 | 96 |
| 722 (-3) |  |
6190 | Bar 1 x 3 (Radio Handle, Phone Handset) | 5 | 96 |
| 723 (-44) |  |
4727 | Plant, Flower 2 x 2 Leaves – Angular | 1 | 96 |
| 724 (+10) |  |
15745 | Rock – Heart Jewel with Shaft | 2 | 95 |
| 725 (-28) |  |
92692 | Plate Special 1 x 2 with Angled Handles on Side | 3 | 95 |
| 726 (+14) |  |
2489 | Barrel 2 x 2 x 2 | 4 | 95 |
| 727 (-10) |  |
93789 | Weapon Pike / Spear Flat End | 5 | 95 |
| 728 (-52) |  |
30386 | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End | 5 | 95 |
| 729 (+36) |  |
22391 | Wedge 4 x 4 Pointed | 7 | 95 |
| 730 (+27) |  |
4738a | Treasure Chest Bottom with Rear Slots | 7 | 95 |
| 731 (-81) |  |
3822 | Door 1 x 3 x 1 Left | 9 | 95 |
| 732 (+13) |  |
4528 | Equipment Frying Pan | 4 | 94 |
| 733 (-1) |  |
32250 | Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin | 7 | 94 |
| 734 (-12) |  |
41748 | Wedge 6 x 2 Left | 13 | 94 |
| 735 (-48) |  |
43712 | Wedge 6 x 4 Triple Curved | 15 | 94 |
| 736 (+22) |  |
48170 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | 3 | 93 |
| 737 (+386) |  |
35044 | Plate Special 4 x 4 with Curved Cutout | 5 | 93 |
| 738 (-58) |  |
15064 | Insect Leg / Tail | 7 | 93 |
| 739 (-65) |  |
14682 | Vehicle Exhaust Pipe with Technic Pin – Flat End | 2 | 92 |
| 740 (+6) |  |
3837 | Equipment Shovel [Round Stem End] | 4 | 92 |
| 741 (-68) |  |
61072 | Plate Special 1 x 4 with Angled Tubes | 3 | 91 |
| 742 (+62) |  |
3063b | Brick Round Corner 2 x 2 Macaroni with Stud Notch | 4 | 91 |
| 743 (-51) |  |
62743 | Plate Special 2 x 16 with Angled Side Extensions and Hole (Rotor Blade) | 4 | 91 |
| 744 (-101) |  |
61345 | Window 1 x 4 x 2 Plane, Single Hole Top and Bottom for Glass | 7 | 91 |
| 745 (+31) |  |
18587 | Weapon Rapid Shooter Trigger | 2 | 90 |
| 746 (+25) |  |
18588 | Weapon Rapid Shooter Six Barrel | 5 | 90 |
| 747 (+39) |  |
4739a | Treasure Chest Lid [Thick Hinge] | 7 | 90 |
| 748 (-60) |  |
4445 | Slope 45┬░ 2 x 8 | 8 | 90 |
| 749 (+51) |  |
24116 | Technic Panel Curved and Bent 6 x 3 | 8 | 90 |
| 750 (+63) |  |
33299b | Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | 3 | 89 |
| 751 (+81) |  |
88704 | Equipment Whip – Bent | 3 | 89 |
| 752 (+27) |  |
30093 | Plant, Sea Grass | 4 | 89 |
| 753 (+32) |  |
44570 | Hinge Plate 3 x 4 Locking Dual 2 Finger | 4 | 89 |
| 754 (-47) |  |
4083 | Bar 1 x 4 x 2 with Studs | 4 | 89 |
| 755 (+90) |  |
43892 | Tail or Elephant Trunk | 7 | 89 |
| 756 (-7) |  |
95188 | Brick Round Corner 6 x 6 with 33┬░ EdgeSlope and Facet Cutout | 11 | 89 |
| 757 (-52) |  |
33051 | Plant, Apple | 4 | 88 |
| 758 (+33) |  |
32017 | Technic Beam 1 x 5 Thin | 4 | 88 |
| 759 (-51) |  |
62531 | Technic Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface | 10 | 88 |
| 760 (+30) |  |
11954 | Technic Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface | 8 | 88 |
| 761 (+26) |  |
30046 | Window 1 x 2 x 2 2/3 Pane Lattice Diamond with Rounded Top | 2 | 87 |
| 762 (-33) |  |
64276 | Beam 1 x 2 with Ball Joint Straight | 3 | 87 |
| 763 (+47) |  |
19121 | Fence Ornamented 1 x 4 x 2 with 4 Studs | 7 | 87 |
| 764 (-8) |  |
62361 | Mudguard 1 1/2 x 6 x 1 [Arch Extended] | 13 | 87 |
| 765 (+52) |  |
47759 | Wedge 2 x 4 Triple | 10 | 87 |
| 766 (+9) |  |
87989 | Equipment Medical Syringe | 3 | 86 |
| 767 (-24) |  |
15279 | Plant, Grass Stem with Bar Hole [3.2mm] | 5 | 86 |
| 768 (-121) |  |
15362 | Hero Factory Spike Large with Axle Hole | 8 | 86 |
| 769 (-101) |  |
3821 | Door 1 x 3 x 1 Right | 9 | 86 |
| 770 (-22) |  |
30395 | Hook with Towball | 2 | 85 |
| 771 (-38) |  |
4176 | Windscreen 2 x 6 x 2 | 4 | 85 |
| 772 (-61) |  |
98141 | Weapon Scythe / Crescent Blade Serrated with Bar | 5 | 85 |
| 773 (-29) |  |
92585 | Tool Crowbar | 4 | 84 |
| 774 (-12) |  |
14413 | Facet 4 x 4 | 4 | 84 |
| 775 (+33) |  |
55976 | Tyre 56 x 26 Balloon | 1 | 84 |
| 776 (+263) |  |
25375 | Tassel with 1 x 1 Round Stud | 2 | 83 |
| 777 (-63) |  |
4285b | Dish 6 x 6 Inverted [Radar / Webbed / anti-studs at 90┬░] | 6 | 83 |
| 778 (-36) |  |
41531 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar | 8 | 83 |
| 779 (+70) |  |
6060 | Brick Arch 1 x 6 x 3 1/3 Curved Top | 8 | 83 |
| 780 (+13) |  |
87585 | Equipment Oar / Paddle [Reinforced] | 3 | 82 |
| 781 (+58) |  |
30365 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End | 3 | 82 |
| 782 (+58) |  |
14137 | Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside | 4 | 82 |
| 783 (-68) |  |
60607 | Window 1 x 2 x 3 Pane Latticed with Thick Corner Tabs | 4 | 82 |
| 784 (-84) |  |
3940b | Support 2 x 2 x 2 Stand with Reinforced Underside | 4 | 82 |
| 785 (+21) |  |
6183 | Brick Arch 1 x 6 x 2 Curved Top | 7 | 82 |
| 786 (+36) |  |
32324 | Technic Brick 4 x 4 Open Center | 2 | 81 |
| 787 (+60) |  |
27256 | Wave / Lightning Angular, Single | 2 | 81 |
| 788 (-24) |  |
92107 | Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders] | 6 | 81 |
| 789 (-37) |  |
43337 | Panel 1 x 4 x 1 with Rounded Corners [Thick Wall] | 8 | 81 |
| 790 (-81) |  |
57906 | Hinge Plate 1 x 12 with Angled Side Extensions and Tapered Ends | 9 | 81 |
| 791 (+5) |  |
85543 | Rubber Belt Small [15mm ID] [Round Cross Section] | 1 | 81 |
| 792 (-126) |  |
98577 | Technic Beam 1 x 3 with Ball Joint in Middle | 1 | 81 |
| 793 (+21) |  |
2530 | Weapon Sword / Cutlass | 3 | 80 |
| 794 (+3) |  |
33320 | Frog | 6 | 80 |
| 795 (+95) |  |
28870 | Ornament with Bar | 6 | 80 |
| 796 (-13) |  |
11399 | Plate Special 4 x 4 with Clips Horizontal (thick open O clips) | 5 | 80 |
| 797 (-47) |  |
87080 | Technic Panel Fairing # 1 Small Smooth Short, Side A | 13 | 80 |
| 798 (-171) |  |
57878 | Train Wheel RC Train | 1 | 80 |
| 799 (+130) |  |
32932 | FENCE 1X4X2,W/ SHAFT, NO.1 | 2 | 79 |
| 800 (+15) |  |
32198 | Technic Gear 20 Tooth Bevel | 2 | 79 |
| 801 (-33) |  |
33085 | Plant, Banana | 3 | 79 |
| 802 (+48) |  |
30554b | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole | 3 | 79 |
| 803 (+70) |  |
24122 | Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | 2 | 78 |
| 804 (+269) |  |
34816 | Brick Special 1 x 2 with Vertical Closed Handle on Edge | 6 | 78 |
| 805 (+104) |  |
10202 | Tile 6 x 6 with Bottom Tubes | 5 | 78 |
| 806 (+38) |  |
18892 | Brick Special 2 x 4 with Wheels Holder with 2 x 2 Cutout | 1 | 78 |
| 807 (-4) |  |
6192 | Brick Curved 2 x 4 No Studs, Curved Top | 6 | 77 |
| 808 (+16) |  |
6233 | Cone 3 x 3 x 2 | 10 | 77 |
| 809 (+152) |  |
24119 | Technic Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface | 8 | 77 |
| 810 (+32) |  |
32529 | Technic Pin Connector Plate with One Hole (Single on Bottom) | 1 | 77 |
| 811 (-37) |  |
95228 | Equipment Bottle | 3 | 76 |
| 812 (+22) |  |
3900 | Equipment Signal Paddle | 3 | 76 |
| 813 (-32) |  |
90661 | Large Figure Foot, Type 2 | 8 | 76 |
| 814 (-20) |  |
85959pat0003 | Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern | 1 | 76 |
| 815 (-8) |  |
20252 | Large Figure Weapon Claw, Bent and Notched with Clip | 3 | 75 |
| 816 (+51) |  |
14181 | Wedge Plate 4 x 9 with Stud Notches | 5 | 75 |
| 817 (+54) |  |
16968 | Brick Special 1 x 4 with Inside Clips (Disk Shooter) | 4 | 74 |
| 818 (-71) |  |
15540 | Helicopter Landing Ski 1 x 6 with Pin Hole | 4 | 74 |
| 819 (-124) |  |
53454 | Weapon Axe Head, Clip-on (Viking) [Thick Clip] | 6 | 74 |
| 820 (-9) |  |
40243 | Stairs Spiral Step | 5 | 74 |
| 821 (-55) |  |
15976 | Large Figure Foot, with Ball Socket 3 x 5 x 2 | 5 | 74 |
| 822 (+238) |  |
35459 | Tile Special 1 x 3 Inverted with Center Hole | 11 | 74 |
| 823 (-242) |  |
90641 | Large Figure Limb Cover, Size 3, Armor with Ball Joint Socket | 14 | 74 |
| 824 (-23) |  |
2340 | Tail 4 x 1 x 3 | 8 | 74 |
| 825 (+37) |  |
2415 | Plate Special 2 x 2 Thin with Plane Single Wheel Holder | 1 | 74 |
| 826 (-14) |  |
44300 | Hinge Tile 1 x 3 Locking with 1 Finger on Top | 3 | 73 |
| 827 — |  |
18759 | Slope Inverted 45┬░ 3 x 1 Double with 2 Blocked Open Studs | 6 | 73 |
| 828 (-97) |  |
44224 | Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 1 | 73 |
| 829 (+75) |  |
18920 | Equipment Scissors | 1 | 73 |
| 830 (-110) |  |
44225 | Technic Rotation Joint Disk with Pin and 3L Beam Thick | 1 | 73 |
| 831 (-22) |  |
87421 | Panel 3 x 3 x 6 Corner Wall without Bottom Indentations | 8 | 72 |
| 832 (-43) |  |
87086 | Technic Panel Fairing # 2 Small Smooth Short, Side B | 13 | 72 |
| 833 (+32) |  |
40378 | Dinosaur Tail / Neck Middle Section with Pin | 11 | 72 |
| 834 (+12) |  |
50949 | Plate Special 1 x 2 with Racers Car Grill | 3 | 71 |
| 835 (-5) |  |
44809 | Technic Pin Connector Perpendicular 2 x 2 Bent | 3 | 71 |
| 836 (-38) |  |
95343 | Bucket 1 x 1 x 1 | 4 | 71 |
| 837 (+89) |  |
18944 | Technic Panel Curved 3 x 13 | 8 | 71 |
| 838 (-68) |  |
64683 | Technic Panel Fairing # 3 Small Smooth Long, Side A | 13 | 71 |
| 839 (+18) |  |
92842 | Propeller 3 Blades 5 Diameter | 1 | 71 |
| 840 (-41) |  |
2854 | Technic Engine Crankshaft Center | 1 | 71 |
| 841 (-53) |  |
90607 | Large Figure Skeletal, Limb with Ball Joint on Axle and Ball Socket | 2 | 70 |
| 842 (-175) |  |
90639 | Large Figure Limb Cover, Size 5, Armor with Ball Joint Socket | 13 | 70 |
| 843 (-65) |  |
64391 | Technic Panel Fairing # 4 Small Smooth Long, Side B | 13 | 69 |
| 844 (+7) |  |
60752 | Weapon Sword / Scimitar Notched Blade | 2 | 68 |
| 845 (-201) |  |
3185 | Fence 1 x 4 x 2 | 3 | 68 |
| 846 (+24) |  |
3852b | Equipment Hairbrush Short Handle [10mm] | 4 | 68 |
| 847 (+9152) |  |
39739 | Tile 1 x 1 Special Heart | 4 | 68 |
| 848 (+18) |  |
61800 | Large Figure Wing, Small | 7 | 68 |
| 849 (-124) |  |
219 | Train Track Plastic Connection/Stacking Pin 4 Stud long for Track Storage | 1 | 68 |
| 850 (-87) |  |
4522 | Tool Hammer / Mallet Large | 1 | 68 |
| 851 (+1) |  |
98138pr0017 | Tile Round 1 x 1 with Strawberry Print | 1 | 68 |
| 852 (-33) |  |
2486 | Bar 1 x 8 x 2 | 3 | 67 |
| 853 (+441) |  |
30166 | Minifig Shield Rectangular with 4 Studs | 3 | 67 |
| 854 (+39) |  |
3823 | Windscreen 2 x 4 x 2 | 3 | 67 |
| 855 (-95) |  |
3070bpr0007 | Tile 1 x 1 with White and Red Gauge Print | 1 | 67 |
| 856 (+30) |  |
32065 | Technic Beam 1 x 7 Thin | 4 | 66 |
| 857 (-155) |  |
11089 | Barb Large Flexible [Claw, Horn] | 7 | 66 |
| 858 (-35) |  |
15413 | Tyre 49.53 x 20 | 1 | 66 |
| 859 (-244) |  |
90617 | Large Figure Skeletal, Limb with 2 Ball Joints, and Ball Socket | 4 | 65 |
| 860 (-32) |  |
30387 | Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End | 6 | 65 |
| 861 (+74) |  |
24946 | Food Egg with 1.5mm Hole [Plain] | 5 | 65 |
| 862 (+43) |  |
44674 | Mudguard 2 x 4 [Headlights Extension] | 12 | 65 |
| 863 (+113) |  |
38320 | Bars For Window 1 x 2 x 2 | 1 | 65 |
| 864 (-48) |  |
64728 | Equipment Dynamite Sticks | 1 | 65 |
| 865 (-4) |  |
60614 | Door 1 x 2 x 3 with Vertical Handle, New Mold for Tabless Frames | 3 | 64 |
| 866 (-45) |  |
30043 | Plate Special 1 x 4 with Arm Down | 3 | 64 |
| 867 (-41) |  |
6256 | Equipment Dish / Plate / Bowl 3 x 3 [Plain] | 7 | 64 |
| 868 (-25) |  |
2479 | Propeller 4 Blade 5 Diameter with Rounded Ends | 1 | 64 |
| 869 (+114) |  |
3838 | Minifig Neckwear Airtanks | 6 | 63 |
| 870 (+52) |  |
24947 | Brick Round 2 x 2 x 1 1/3 Inverted | 6 | 63 |
| 871 (+193) |  |
20309 | Window 1 x 4 x 1 2/3 with Spoked Rounded Top | 5 | 63 |
| 872 (+98) |  |
18945 | Technic Panel 5 x 11 x 1 Tapered | 7 | 63 |
| 873 (-55) |  |
10288 | Technic Axle and Pin Connector Triple [120┬░ Offset] | 3 | 62 |
| 874 (+136) |  |
27393 | Wave / Power Blast Rounded Energy with Bar Handle | 6 | 62 |
| 875 (-55) |  |
44661 | Tail Shuttle – Small | 7 | 62 |
| 876 (-38) |  |
62360 | Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom | 13 | 62 |
| 877 (+12) |  |
6140 | Bar 1 x 6 [Closed Studs] | 2 | 61 |
| 878 (-123) |  |
92589 | Door Grill 1 x 4 x 6 | 2 | 61 |
| 879 (-46) |  |
3299 | Slope 33┬░ 2 x 4 Double | 2 | 61 |
| 880 (-75) |  |
86208 | Weapon Gun / Torch (Space) [No Grooves] | 2 | 61 |
| 881 (+40) |  |
18838 | Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 6 | 61 |
| 882 (+38) |  |
14226c11 | String with End Studs 11L Overall | 1 | 61 |
| 883 (-20) |  |
74698 | Tile Round 2 x 2 – Thick Lifting Ring | 1 | 61 |
| 884 (-20) |  |
3836 | Equipment Brush / Pushbroom | 1 | 61 |
| 885 (-49) |  |
98285 | Hinge Plate 2 x 4 with Pin Hole – Bottom | 2 | 60 |
| 886 (-1) |  |
60599 | Door Frame 2 x 4 x 6 | 7 | 60 |
| 887 (-126) |  |
3648b | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 1] | 1 | 60 |
| 888 (+71) |  |
76537 | Technic Shock Absorber 6.5L with Hard Spring | 2 | 59 |
| 889 (-116) |  |
15107 | Appendage Bony with Axle (Rib, Tail) | 3 | 59 |
| 890 (-16) |  |
30132 | Weapon Gun / Pistol / Revolver Large Barrel [Old Style] | 3 | 59 |
| 891 (+8) |  |
18395 | Wave / Flame Rounded Single with Pin | 6 | 59 |
| 892 (+51) |  |
19159 | Technic Pin Double Triangle 1 x 3 with 2 Clips Not Completely Round Pin Holes | 1 | 59 |
| 893 (-38) |  |
57999 | Train Wheel Spoked with Technic Axle Hole and Rubber Friction Band | 2 | 58 |
| 894 (-34) |  |
41862 | Plate Special 2 x 2 with Grills | 2 | 58 |
| 895 (+155) |  |
18910 | Hinge Panel 3 x 4 x 3 Curved | 4 | 58 |
| 896 (+101) |  |
44126 | Brick Curved 6 x 2 | 6 | 58 |
| 897 (-14) |  |
15082 | Bat Wing with Shaft [Chima Bat Wing] | 5 | 58 |
| 898 (+151) |  |
21229 | Fence Spindled 4 x 4 x 2 Quarter Round with 3 Studs | 8 | 58 |
| 899 (-74) |  |
33057 | Food Turkey Drumstick [Short] – 20 mm Opening | 1 | 58 |
| 900 (+73) |  |
10187 | Weapon Bladed Claw Spread | 4 | 57 |
| 901 (+1) |  |
2562 | Weapon Gun / Pistol Flintlock | 2 | 56 |
| 902 (+116) |  |
30505 | Wedge 3 x 3 Cut Corner | 3 | 56 |
| 903 (-11) |  |
4588 | Brick Round 1 x 1 with Fins, Open Stud | 4 | 56 |
| 904 (-32) |  |
30115 | Snake | 4 | 56 |
| 905 (-37) |  |
11100 | Wing Feathered | 5 | 56 |
| 906 (+119) |  |
23405 | Panel 1 x 6 x 5 [Vertical Corrugated] | 8 | 56 |
| 907 (+38) |  |
32494 | Technic Steering / CV Joint | 1 | 56 |
| 908 (+4) |  |
92909 | Technic Steering Hub for Portal Axle | 1 | 56 |
| 909 (-6) |  |
22408 | Minifig Shield Pentagonal | 2 | 55 |
| 910 (-9) |  |
26597 | Brick Special 1 x 2 with Vertical Closed Handle Inset from Edge | 3 | 55 |
| 911 (-11) |  |
4151b | Plate Special 8 x 8 with Grille [Hole in Center] | 4 | 55 |
| 912 (+21) |  |
30134 | Stairs 7 x 4 x 6 Straight Open | 4 | 55 |
| 913 (-32) |  |
4449 | Bag / Briefcase | 5 | 55 |
| 914 (-30) |  |
6070 | Windscreen 5 x 2 x 1 2/3 | 12 | 55 |
| 915 (+86) |  |
93604 | Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 12 | 55 |
| 916 (+92) |  |
64178 | Technic Beam 5 x 11 Open Center Frame Thick | 1 | 55 |
| 917 (-40) |  |
2566 | Plant, Palm Tree Top | 3 | 54 |
| 918 (+21) |  |
46667 | Jet Engine Fan with 10 Blades and Technic Pin | 4 | 54 |
| 919 (-50) |  |
3943b | Cone 4 x 4 x 2 with Axle Hole [Plain] | 6 | 54 |
| 920 (-22) |  |
6565 | Wedge 3 x 2 Left | 7 | 54 |
| 921 (-68) |  |
2508 | Plate Special 1 x 2 with Long Towball | 1 | 54 |
| 922 (+120) |  |
93595 | Wheel 11 x 6 with 8 ‘Y’ Spokes [Plain] | 1 | 54 |
| 923 (+18) |  |
6041 | Propeller 3 Blade 3 Diameter | 2 | 53 |
| 924 (+33) |  |
48723 | Technic Axle Connector Hub with 4 Bars at 90┬░ | 3 | 53 |
| 925 (-17) |  |
60621 | Door 1 x 4 x 6 Barred with Stud Handle | 3 | 53 |
| 926 (-2) |  |
30540 | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End | 4 | 53 |
| 927 (-30) |  |
6564 | Wedge 3 x 2 Right | 7 | 53 |
| 928 (-46) |  |
89523 | Plate Special 10 x 10 Octagonal with Hole | 7 | 53 |
| 929 (+62) |  |
86500 | Dome Hemisphere 4 x 4 | 9 | 53 |
| 930 (-11) |  |
18868c00 | Function Brick Round 4 x 4 x 2/3 with 4 Studs (Generic for Gadgets) | 1 | 53 |
| 931 (+97) |  |
98549 | Tile Special 2 x 2 with Bar and Stud with Stop Ring | 2 | 52 |
| 932 (-56) |  |
87617 | Cylinder 1 x 5 1/2 with Handle (Friction Cylinder) | 3 | 52 |
| 933 (+61) |  |
4515 | Slope 10┬░ 6 x 8 | 7 | 52 |
| 934 (-55) |  |
53401 | Train, Track Plastic (RC Trains) Straight | 1 | 52 |
| 935 (+155) |  |
24869 | Wheel Roller Coaster | 1 | 52 |
| 936 (-9) |  |
90615 | Large Figure Skeletal, Limb with Ball Joint, and Ball Socket and Two Holes | 2 | 51 |
| 937 (+230) |  |
38583 | Brick Special Arch 1 x 2 Jumper | 2 | 51 |
| 938 (+26) |  |
30029 | Vehicle Base 4 x 10 x 2/3 with 4 x 2 Recessed Center with Smooth Underside | 2 | 51 |
| 939 (-32) |  |
30592 | Brick Special 2 x 2 with Top Pin and 1 x 2 Side Plates | 3 | 51 |
| 940 (-8) |  |
2714b | Bar 8L – Two Stop Rings / One Pin, Technic Figure Ski Pole [Flat End] | 3 | 51 |
| 941 (-26) |  |
6178 | Tile Special 6 x 12 with Studs on Edges | 4 | 51 |
| 942 (+10) |  |
27257 | Weapon Pike / Spear Tip | 4 | 51 |
| 943 (+324) |  |
24599 | Brick Round Corner 5 x 5 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | 8 | 51 |
| 944 (-14) |  |
50955 | Wedge 10 x 3 Left | 9 | 51 |
| 945 (-7) |  |
50956 | Wedge 10 x 3 Right | 8 | 51 |
| 946 (-51) |  |
15071 | Weapon Gun / Blaster 1 x 2 x 2/3 with Studs on Sides and Handle | 1 | 51 |
| 947 (-91) |  |
85940 | Technic, Pin Connector Double with Bar | 1 | 51 |
| 948 (+39) |  |
30090 | Headwear Accessory Visor / Diver’s Mask | 1 | 51 |
| 949 (-32) |  |
2815 | Technic Wedge Belt Wheel Tire | 2 | 50 |
| 950 (-62) |  |
93092 | Bag / Basket | 3 | 50 |
| 951 (-15) |  |
33125 | Food Croissant | 3 | 50 |
| 952 (-288) |  |
90612 | Large Figure Skeletal, Limb with Ball Joint and Ball Socket, Short | 4 | 50 |
| 953 (+364) |  |
23949 | Slope 45┬░ 2 x 6 | 6 | 50 |
| 954 (+38) |  |
32200 | Hose Soft Axle 12 | 7 | 50 |
| 955 (+24) |  |
60808 | Panel 1 x 4 x 5 with Arched Window | 9 | 50 |
| 956 (-10) |  |
50373 | Wedge 3 x 4 [Stud Notches] | 10 | 50 |
| 957 (-63) |  |
57894 | Window 1 x 4 x 6 Frame with 3 Panes | 3 | 49 |
| 958 (-44) |  |
4489b | Wheel Wagon Large (33mm D.), hole notched for wheels holder pin | 4 | 49 |
| 959 (-4) |  |
56904 | Wheel 30 x 14 | 4 | 49 |
| 960 (+147) |  |
18969 | Panel 4 x 4 x 13 Curved Tapered with Clip at Each End | 6 | 49 |
| 961 (+48) |  |
18947 | Technic Driving Ring 3L | 1 | 49 |
| 962 (+506) |  |
37775 | Flame Small with Pin | 1 | 49 |
| 963 (+158) |  |
18978a | Wheel Cover 5 Spoke – for Wheel 18976 | 3 | 48 |
| 964 (+156) |  |
18978b | Wheel Cover 10 Spoke – for Wheel 18976 | 3 | 48 |
| 965 (-31) |  |
32125 | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) | 3 | 48 |
| 966 (+100) |  |
24324 | Book Binding with Two Studs | 4 | 48 |
| 967 (+17) |  |
92474 | Windscreen 6 x 2 x 2 with Handle | 4 | 48 |
| 968 (+28) |  |
64951 | Barrel Half Large with Axle Hole | 6 | 48 |
| 969 (+11) |  |
24131 | Headwear Accessory Hat Clown / Party with Pin | 6 | 48 |
| 970 (+272) |  |
36451a | Infinity Stone | 6 | 48 |
| 971 (-23) |  |
24504 | Minifig Neckwear Ninja Face Scarf | 7 | 48 |
| 972 (-97) |  |
55978 | Tyre 37 x 22 ZR | 1 | 48 |
| 973 (-19) |  |
2421 | Propeller 3 Blade Small | 1 | 48 |
| 974 (-78) |  |
44309 | Tyre 43.2 x 22 ZR | 1 | 48 |
| 975 (-47) |  |
32333 | Technic, Pin Connector Block 1 x 5 x 3 | 2 | 47 |
| 976 (+80) |  |
25386 | Food Hot Dog Bun | 2 | 47 |
| 977 (+52) |  |
33322 | Headwear Accessory Crown / Tiara | 3 | 47 |
| 978 (+198) |  |
28588 | Snake Head with Open Mouth, Fangs and Curved Neck with Bar | 4 | 47 |
| 979 (+9020) |  |
28974 | Minifig Neckwear Bracket [One Stud] – Reinforced | 6 | 47 |
| 980 (+64) |  |
13608 | Weapon Gun Ray / Sci Fi – Rounded Heat Diffusers | 2 | 46 |
| 981 (+5) |  |
98284 | Plate Round 2 x 2 with Pin Hole and 4 Arms Up | 2 | 46 |
| 982 (+156) |  |
6154 | Door Frame 1 x 4 x 4 (Lift) | 3 | 46 |
| 983 (+654) |  |
43045 | Hinge Plate 2 x 4 with Pin Hole with 2 Holes – Top | 3 | 46 |
| 984 (+30) |  |
40902 | Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole | 3 | 46 |
| 985 (+134) |  |
25061 | Train, Track Plastic, Roller Coaster, Curve | 4 | 46 |
| 986 (-184) |  |
11091 | Wing 9L with Stylized Feathers | 6 | 46 |
| 987 (-310) |  |
30173 | Weapon Sword / Katana / Shamshir with Uncapped Pommel [Square Guard] | 5 | 46 |
| 988 (+19) |  |
92906 | Technic Steering / CV Joint Axle | 1 | 46 |
| 989 (-31) |  |
92926 | Trash Can with 4 Cover Holders | 3 | 45 |
| 990 (-40) |  |
6575 | Technic Cam | 4 | 45 |
| 991 (-20) |  |
19087 | Bionicle Armor Cover (Toa Okoto) | 4 | 45 |
| 992 (+151) |  |
90509 | Sports Ski 6L | 4 | 45 |
| 993 (+90) |  |
33121 | Crab | 5 | 45 |
| 994 (-28) |  |
45301 | Wedge 16 x 4 Triple Curved | 8 | 45 |
| 995 (+5) |  |
24326 | WHEEL BEARING 4x4x2/3 W/4,85 HOLE | 1 | 45 |
| 996 (-11) |  |
30192 | Tool Grappling Hook | 2 | 44 |
| 997 (-162) |  |
90616 | Large Figure Skeletal, Limb with Ball Joint, and Ball Socket and Hole | 2 | 44 |
| 998 (-58) |  |
2437 | Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top | 3 | 44 |
| 999 (+28) |  |
3300 | Slope 33┬░ 2 x 2 Double | 3 | 44 |
| 1000 (-109) |  |
11289 | Windscreen 4 x 4 x 4 2/3 with Handle | 4 | 44 |