← For the latest data, visit brickarchitect.com/most-common-lego-parts.
Top 600 Most Common LEGO Parts (January 2020)
This update is based on sets released in 2015-2019, and does not include any of the newly released 2020 sets. Year-over-year comparisons are between 2015-2019 and 2014-2018. (It should be an accurate reflection of that 5-year period, since most of the 2019 sets should be inventoried by now.)
Note: Year-over-year comparisons are between 2015-2019, and 2014-2018, which should be pretty accurate since inventories of almost every 2019 set should have been included by now. (This uses data downloaded on January 13, 2020).
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 1 — |  |
3023 | 1×2 Plate | 48 | 31207 |
| 2 (+1) |  |
3024 | 1×1 Plate | 46 | 28560 |
| 3 (-1) |  |
4073 | 1×1 Plate, Round | 40 | 27606 |
| 4 — |  |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 20961 |
| 5 — |  |
54200 | 1×1 Slope 30° (Cheese) | 50 | 13752 |
| 6 (+1) |  |
3069b | 1×2 Tile | 46 | 13134 |
| 7 (-1) |  |
3004 | 1×2 Brick | 40 | 12963 |
| 8 — |  |
3710 | 1×4 Plate | 34 | 12413 |
| 9 — |  |
3005 | 1×1 Brick | 48 | 11261 |
| 10 — |  |
3020 | 2×4 Plate | 35 | 10890 |
| 11 — |  |
3022 | 2×2 Plate | 30 | 10518 |
| 12 — |  |
2412b | 1×2 Tile, Grille | 25 | 9054 |
| 13 — |  |
6558 | Technic Pin Long with Friction Ridges Lengthwise | 1 | 8910 |
| 14 — |  |
15573 | 1×2 Jumper | 29 | 8746 |
| 15 (+1) |  |
98138 | 1×1 Tile, Round | 32 | 8514 |
| 16 (+2) |  |
3021 | 2×3 Plate | 29 | 7769 |
| 17 — |  |
3070b | 1×1 Tile | 40 | 7720 |
| 18 (-3) |  |
3003 | 2×2 Brick | 37 | 7123 |
| 19 — |  |
3666 | 1×6 Plate | 31 | 7101 |
| 20 (+1) |  |
3623 | 1×3 Plate | 32 | 7058 |
| 21 (+1) |  |
11477 | 2×1 Curved | 39 | 6956 |
| 22 (-2) |  |
2431 | 1×4 Tile | 38 | 6681 |
| 23 (+2) |  |
85984 | 1×2 Slope 30° (Double Cheese) | 32 | 6418 |
| 24 (-1) |  |
4274 | Technic Pin 1/2 | 2 | 6347 |
| 25 (-1) |  |
3010 | 1×4 Brick | 33 | 6239 |
| 26 (+1) |  |
3001 | 2×4 Brick | 30 | 6116 |
| 27 (-1) |  |
3062b | Brick Round 1 x 1 Open Stud | 33 | 5731 |
| 28 (+2) |  |
2420 | 2×2 Plate, Corner | 22 | 5606 |
| 29 (+7) |  |
15068 | 2×2 Curved | 35 | 5350 |
| 30 (-2) |  |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5202 |
| 31 (-2) |  |
87580 | 2×2 Jumper | 31 | 5080 |
| 32 — |  |
3795 | 2×6 Plate | 28 | 5017 |
| 33 (-2) |  |
3068b | 2×2 Tile | 34 | 4813 |
| 34 — |  |
87079 | 2×4 Tile | 35 | 4731 |
| 35 (-2) |  |
3040 | 2×1 Slope 45° | 35 | 4562 |
| 36 (+1) |  |
4032 | 2×2 Plate, Round w/ Axle | 21 | 4313 |
| 37 (+2) |  |
6636 | 1×6 Tile | 27 | 4278 |
| 38 (+8) |  |
15712 | 1×1 Clip, Top | 12 | 4082 |
| 39 (-1) |  |
87087 | 1×1 Brick, Stud 1-side | 27 | 4037 |
| 40 (+26) |  |
85861 | 1×1 Plate, Round w/ hole | 17 | 3926 |
| 41 (-1) |  |
32062 | Technic Axle 2 Notched | 2 | 3843 |
| 42 — |  |
3622 | 1×3 Brick | 28 | 3731 |
| 43 (-2) |  |
4589 | 1×1 Cone | 33 | 3654 |
| 44 — |  |
4070 | 1×1 Brick, Headlight | 17 | 3558 |
| 45 (-10) |  |
33291 | 1×1 Plate, Flower (4 Petals) | 16 | 3510 |
| 46 (-1) |  |
3941 | 2×2 Brick, Round w/ Axle | 27 | 3504 |
| 47 (-4) |  |
3009 | 1×6 Brick | 28 | 3473 |
| 48 — |  |
3460 | 1×8 Plate | 27 | 3363 |
| 49 (+1) |  |
99780 | 1×2 Bracket, Inverted | 15 | 3354 |
| 50 (-3) |  |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 2 | 3308 |
| 51 (-2) |  |
63864 | 1×3 Tile | 28 | 3265 |
| 52 (+3) |  |
99207 | 2×2 Bracket, Inverted | 11 | 3118 |
| 53 (-2) |  |
32028 | 1×2 Plate w/ Door Rail | 17 | 3057 |
| 54 — |  |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush | 4 | 2881 |
| 55 (+14) |  |
11211 | 1×2 Brick, 2 Studs 1-side | 13 | 2844 |
| 56 (+9) |  |
6091 | 1×2×1⅔ Curved | 31 | 2829 |
| 57 (-5) |  |
3039 | 2×2 Slope 45° | 32 | 2795 |
| 58 (+5) |  |
4162 | 1×8 Tile | 22 | 2794 |
| 59 (-3) |  |
2654 | 2×2 Round, Boat Stud | 24 | 2780 |
| 60 (+4) |  |
4085d | 1×1 Plate w/ Clip, Vertical | 13 | 2760 |
| 61 (+1) |  |
44728 | 2×2 Bracket | 17 | 2738 |
| 62 (-9) |  |
3700 | 1×2 Technic Brick, 1 Hole | 16 | 2719 |
| 63 (-5) |  |
2357 | 2×2 Brick, Corner | 21 | 2695 |
| 64 (-5) |  |
3660 | 2×2 Slope 45°, Inverted | 26 | 2663 |
| 65 (+2) |  |
3034 | 2×8 Plate | 28 | 2647 |
| 66 (-9) |  |
3665 | 2×1 Slope 45°, Inverted | 28 | 2637 |
| 67 (-6) |  |
3713 | Technic Bush | 3 | 2549 |
| 68 — |  |
4519 | Technic Axle 3 | 2 | 2523 |
| 69 (+1) |  |
59443 | Technic Axle Connector | 10 | 2521 |
| 70 (+5) |  |
41740 | Plate Special 1 x 4 with 2 Studs with New Underside | 26 | 2489 |
| 71 — |  |
63868 | 1×2 Plate w/ Clip End, Horizontal | 12 | 2481 |
| 72 (-12) |  |
60478 | 1×2 Plate w/ Handle, End | 14 | 2473 |
| 73 (-1) |  |
98283 | 1×2 Brick, Masonry | 8 | 2415 |
| 74 (+2) |  |
92280 | 1×2 Plate w/ Clip, Top | 6 | 2349 |
| 75 (-2) |  |
48336 | 1×2 Plate w/ Handle, Side | 12 | 2315 |
| 76 (-2) |  |
30136 | 1×2 Brick, Log (Palisade) | 13 | 2279 |
| 77 (+20) |  |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 8 | 2215 |
| 78 (-1) |  |
32064 | 1×2 Technic Brick, 1 Axle Hole | 13 | 2107 |
| 79 (+4) |  |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 18 | 2029 |
| 80 (+22) |  |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 15 | 2020 |
| 81 (+56) |  |
24866 | Plant, Flower 1 x 1 | 14 | 1967 |
| 82 (+7) |  |
99781 | Bracket 1 x 2 – 1 x 2 | 11 | 1961 |
| 83 (-3) |  |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 18 | 1937 |
| 84 (+2) |  |
93273 | 4×1 Curved, Double | 29 | 1921 |
| 85 (-6) |  |
50950 | 3×1 Curved | 32 | 1915 |
| 86 (+5) |  |
3031 | Plate 4 x 4 | 22 | 1896 |
| 87 (-9) |  |
2877 | Brick Special 1 x 2 with Grill | 9 | 1887 |
| 88 (-3) |  |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] | 17 | 1885 |
| 89 (+64) |  |
25269 | Tile Round 1 x 1 Quarter | 28 | 1870 |
| 90 (-9) |  |
3002 | 2×3 Brick | 14 | 1856 |
| 91 (-7) |  |
6541 | Technic Brick 1 x 1 with Hole | 14 | 1815 |
| 92 (-4) |  |
4477 | 1×10 Plate | 15 | 1810 |
| 93 (+32) |  |
18654 | Technic Pin Connector Round 1L [Beam] | 11 | 1799 |
| 94 (+12) |  |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 1760 |
| 95 (-8) |  |
3673 | Technic Pin without Friction Ridges Lengthwise | 1 | 1756 |
| 96 (-3) |  |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 13 | 1721 |
| 97 (+3) |  |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 18 | 1708 |
| 98 — |  |
62462 | Technic Pin Connector Round [Slotted] | 18 | 1679 |
| 99 (-5) |  |
6536 | Technic Axle and Pin Connector Perpendicular | 13 | 1663 |
| 100 (-10) |  |
32523 | Technic Beam 1 x 3 Thick | 16 | 1659 |
| 101 (-9) |  |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 14 | 1648 |
| 102 (+15) |  |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 4 | 1623 |
| 103 (-4) |  |
14769 | 2×2 Tile, Round | 27 | 1623 |
| 104 (-8) |  |
32316 | Technic Beam 1 x 5 Thick | 17 | 1603 |
| 105 — |  |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 6 | 1553 |
| 106 (-11) |  |
53451 | Barb Small Flexible [Claw, Horn] | 12 | 1523 |
| 107 (+8) |  |
3032 | Plate 4 x 6 | 21 | 1508 |
| 108 (-4) |  |
32140 | Technic Beam 2 x 4 L-Shape Thick | 13 | 1496 |
| 109 (+15) |  |
87994 | Bar 3L | 11 | 1486 |
| 110 (-3) |  |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 9 | 1477 |
| 111 (-3) |  |
32524 | Technic Beam 1 x 7 Thick | 17 | 1477 |
| 112 (-9) |  |
4740 | 2×2 Dish | 27 | 1461 |
| 113 (+3) |  |
32000 | Technic Brick 1 x 2 [2 Holes] | 9 | 1451 |
| 114 (-2) |  |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 10 | 1415 |
| 115 (-5) |  |
2456 | 2×6 Brick | 20 | 1412 |
| 116 (-2) |  |
3832 | 2×10 Plate | 15 | 1411 |
| 117 (-6) |  |
4286 | Slope 33┬░ 3 x 1 | 22 | 1406 |
| 118 (-17) |  |
30374 | Bar 4L (Lightsaber Blade / Wand) | 18 | 1379 |
| 119 (+1) |  |
32526 | Technic Beam 3 x 5 L-Shape Thick | 17 | 1374 |
| 120 (-11) |  |
32013 | Technic Axle and Pin Connector Angled #1 | 12 | 1371 |
| 121 (-8) |  |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 25 | 1352 |
| 122 (+59) |  |
20482 | Tile Round 1 x 1 with Pin | 15 | 1342 |
| 123 (+13) |  |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 6 | 1335 |
| 124 (-5) |  |
3008 | 1×8 Brick | 16 | 1301 |
| 125 (-3) |  |
3705 | Technic Axle 4 | 2 | 1300 |
| 126 (-3) |  |
4865b | Panel 1 x 2 x 1 [Rounded Corners] | 23 | 1285 |
| 127 — |  |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 11 | 1283 |
| 128 (+3) |  |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 11 | 1277 |
| 129 (-47) |  |
15379 | Technic Link Tread with Beveled Edge | 2 | 1258 |
| 130 (-12) |  |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1256 |
| 131 (-5) |  |
3701 | Technic Brick 1 x 4 [3 Holes] | 10 | 1232 |
| 132 (-11) |  |
4081b | Plate Special 1 x 1 with Clip Light [Thick Ring] | 13 | 1212 |
| 133 (+16) |  |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 17 | 1191 |
| 134 (-4) |  |
32073 | Technic Axle 5 | 2 | 1183 |
| 135 (-2) |  |
4599b | Tap 1 x 1 with Hole in Spout | 10 | 1161 |
| 136 (-7) |  |
87083 | Technic Axle 4 with Stop | 1 | 1156 |
| 137 (-5) |  |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 19 | 1149 |
| 138 (+20) |  |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 1147 |
| 139 (-11) |  |
60481 | Slope 65┬░ 2 x 1 x 2 | 25 | 1142 |
| 140 (+46) |  |
24201 | Slope Curved 2 x 1 Inverted | 16 | 1125 |
| 141 (-3) |  |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly] | 12 | 1116 |
| 142 (-3) |  |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 9 | 1111 |
| 143 (-3) |  |
41677 | Technic Beam 1 x 2 Thin | 7 | 1105 |
| 144 (-2) |  |
64644 | Equipment Telescope | 7 | 1104 |
| 145 (+9) |  |
60474 | Plate Round 4 x 4 with Pin Hole | 21 | 1079 |
| 146 (-2) |  |
40490 | Technic Beam 1 x 9 Thick | 11 | 1060 |
| 147 (-13) |  |
87552 | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 12 | 1059 |
| 148 (+14) |  |
32278 | Technic Beam 1 x 15 Thick | 15 | 1059 |
| 149 (-14) |  |
51739 | Wedge Plate 2 x 4 | 20 | 1050 |
| 150 (-7) |  |
3065 | Brick 1 x 2 without Bottom Tube | 12 | 1045 |
| 151 (-3) |  |
11090 | Bar Holder with Clip | 9 | 1044 |
| 152 (-6) |  |
60479 | 1×12 Plate | 10 | 1042 |
| 153 (+30) |  |
60592 | Window 1 x 2 x 2 Flat Front | 13 | 1022 |
| 154 (+50) |  |
18674 | Tile 2 x 2 Round with Center Stud | 14 | 1020 |
| 155 (+33) |  |
18677 | Plate Special 1 x 2 with Pin Hole | 6 | 1009 |
| 156 (-15) |  |
2432 | Tile Special 1 x 2 with Handle | 15 | 1009 |
| 157 — |  |
49668 | Plate Special 1 x 1 with Tooth | 16 | 1009 |
| 158 (+10) |  |
15392 | Weapon Gun Trigger | 2 | 997 |
| 159 (+7) |  |
3937 | Hinge Brick 1 x 2 Base | 12 | 985 |
| 160 (-13) |  |
2450 | Wedge Plate 3 x 3 Cut Corner | 20 | 981 |
| 161 (-1) |  |
63965 | Bar 6L with Stop Ring | 11 | 979 |
| 162 (-3) |  |
3035 | Plate 4 x 8 | 24 | 974 |
| 163 (+11) |  |
15535 | Tile 2 x 2 Round with Hole | 9 | 963 |
| 164 (-19) |  |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 6 | 961 |
| 165 (-10) |  |
32525 | Technic Beam 1 x 11 Thick | 15 | 960 |
| 166 (-10) |  |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 9 | 948 |
| 167 (+32) |  |
85080 | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 22 | 948 |
| 168 (+14) |  |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 936 |
| 169 (-6) |  |
43722 | Wedge Plate 3 x 2 Right | 19 | 935 |
| 170 (-18) |  |
3037 | Slope 45┬░ 2 x 4 | 19 | 934 |
| 171 (+19) |  |
15070 | Plate Special 1 x 1 with Vertical Tooth | 12 | 934 |
| 172 (-11) |  |
3958 | Plate 6 x 6 | 29 | 929 |
| 173 (+11) |  |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 11 | 928 |
| 174 (-9) |  |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 9 | 927 |
| 175 (-25) |  |
298c02 | Lever Small Base with Black Lever | 6 | 910 |
| 176 (-7) |  |
43723 | Wedge Plate 3 x 2 Left | 20 | 909 |
| 177 (+12) |  |
14719 | 2×2 Tile, Corner | 13 | 907 |
| 178 (-7) |  |
41769 | Wedge Plate 4 x 2 Right | 21 | 903 |
| 179 (-12) |  |
32039 | Technic Axle Connector with Axle Hole | 5 | 890 |
| 180 (-16) |  |
2445 | 2×12 Plate | 14 | 890 |
| 181 (-11) |  |
6632 | Technic Beam 1 x 3 Thin | 10 | 888 |
| 182 (+78) |  |
99563 | Money / Gold Bar [Ingot] | 10 | 873 |
| 183 (-11) |  |
3747b | Slope Inverted 33┬░ 3 x 2 [No Connections between Studs] | 15 | 871 |
| 184 (-11) |  |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 870 |
| 185 (-6) |  |
41770 | Wedge Plate 4 x 2 Left | 22 | 869 |
| 186 (-6) |  |
30565 | Plate Round Corner 4 x 4 | 23 | 858 |
| 187 (-36) |  |
6231 | Panel 1 x 1 x 1 Corner | 13 | 857 |
| 188 (-12) |  |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 846 |
| 189 (+83) |  |
26047 | Plate 1 x 1 Rounded with Handle | 9 | 832 |
| 190 (+380) |  |
35480 | Plate, Modified 1 x 2 Rounded with 2 Open Studs | 13 | 830 |
| 191 (-6) |  |
60601 | Glass for Window 1 x 2 x 2 Flat | 11 | 811 |
| 192 (-17) |  |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs, Curved Slope End | 14 | 811 |
| 193 (+13) |  |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex | 11 | 799 |
| 194 (+3) |  |
87620 | Facet 2 x 2 | 15 | 796 |
| 195 (-4) |  |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 787 |
| 196 (-18) |  |
3298 | Slope 33┬░ 3 x 2 | 18 | 780 |
| 197 (+233) |  |
33909 | Tile Special 2 x 2 with Only 2 studs | 10 | 774 |
| 198 (-6) |  |
92947 | Brick, Round 2 x 2 [Grill] | 9 | 771 |
| 199 (-6) |  |
32556 | Technic Pin Long without Friction Ridges | 1 | 768 |
| 200 (-13) |  |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 757 |
| 201 (+134) |  |
26603 | 2×3 Tile | 14 | 746 |
| 202 (+13) |  |
11212 | Plate 3 x 3 | 9 | 745 |
| 203 (-26) |  |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 6 | 744 |
| 204 (+113) |  |
26601 | Wedge Plate 2 x 2 Cut Corner | 17 | 738 |
| 205 (+6) |  |
44302 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 7 | 716 |
| 206 (+22) |  |
30357 | Plate Round Corner 3 x 3 | 26 | 715 |
| 207 (-5) |  |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 18 | 705 |
| 208 (-13) |  |
4460b | Slope 75┬░ 2 x 1 x 3 with Hollow Stud | 19 | 704 |
| 209 (+13) |  |
4282 | 2×16 Plate | 12 | 701 |
| 210 (+197) |  |
27925 | Tile 2 x 2 Curved, Macaroni | 21 | 700 |
| 211 (-15) |  |
32002 | Technic Pin 3/4 | 2 | 699 |
| 212 (-5) |  |
3176 | Plate Special 3 x 2 with Hole | 18 | 688 |
| 213 (-5) |  |
41239 | Technic Beam 1 x 13 Thick | 15 | 680 |
| 214 (+9) |  |
88646 | Tile Special 4 x 3 with 4 Studs in Centre | 5 | 674 |
| 215 (+6) |  |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 669 |
| 216 (+178) |  |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 16 | 668 |
| 217 (-16) |  |
2453 | Brick 1 x 1 x 5 with Blocked Open Stud | 17 | 665 |
| 218 (+24) |  |
33183 | Plant, Carrot Top | 4 | 662 |
| 219 (-16) |  |
60477 | Slope 18┬░ 4 x 1 | 13 | 661 |
| 220 (+6) |  |
15462 | Technic Axle 5 with Stop | 2 | 647 |
| 221 (+75) |  |
24246 | Tile 1 x 1 Half Circle | 12 | 647 |
| 222 (+2) |  |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Ball | 1 | 647 |
| 223 (-9) |  |
60596 | Door Frame 1 x 4 x 6 Type 2 | 15 | 645 |
| 224 (+14) |  |
93274 | Bracket 1 x 2 – 2 x 4 | 11 | 645 |
| 225 (-8) |  |
87544 | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 14 | 641 |
| 226 (+135) |  |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 14 | 638 |
| 227 (-27) |  |
87747 | Barb Medium Flexible [Claw, Horn] | 15 | 635 |
| 228 (-19) |  |
3706 | Technic Axle 6 | 2 | 632 |
| 229 (-35) |  |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 627 |
| 230 — |  |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 625 |
| 231 (+5) |  |
11203 | Tile Special 2 x 2 Inverted | 11 | 622 |
| 232 (-19) |  |
32449 | Technic Beam 1 x 4 Thin | 7 | 620 |
| 233 (-8) |  |
44294 | Technic Axle 7 | 2 | 619 |
| 234 (-18) |  |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 21 | 619 |
| 235 (-17) |  |
3036 | Plate 6 x 8 | 15 | 615 |
| 236 (-16) |  |
30503 | Wedge Plate 4 x 4 Cut Corner | 13 | 613 |
| 237 (-32) |  |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 23 | 609 |
| 238 (+3) |  |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 8 | 606 |
| 239 (-27) |  |
4287 | Slope Inverted 33┬░ 3 x 1 (34┬░) | 15 | 606 |
| 240 (-3) |  |
93606 | Slope Curved 4 x 2 No Studs | 19 | 602 |
| 241 (+3) |  |
4624 | Wheel 8mm x 6mm with Slot | 5 | 595 |
| 242 (-44) |  |
6587 | Technic Axle 3 with Stud | 3 | 592 |
| 243 — |  |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 3 | 590 |
| 244 (-15) |  |
54383 | Wedge Plate 6 x 3 Right | 13 | 589 |
| 245 (+3) |  |
6179 | Tile Special 4 x 4 with Studs on Edge | 18 | 584 |
| 246 (-11) |  |
3957 | Antenna 1 x 4 with Rounded Top | 12 | 581 |
| 247 (+78) |  |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 6 | 579 |
| 248 (+7) |  |
2423 | Plant, Leaves 4 x 3 | 10 | 577 |
| 249 (+25) |  |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 9 | 570 |
| 250 (-19) |  |
54384 | Wedge Plate 6 x 3 Left | 13 | 567 |
| 251 (+75) |  |
24316 | Technic Axle 3 with Stop | 1 | 567 |
| 252 (-5) |  |
11215 | Bracket 5 x 2 x 1 1/3 | 9 | 565 |
| 253 (-34) |  |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 8 | 559 |
| 254 (-20) |  |
60484 | Technic Beam 3 x 3 T-Shape Thick | 5 | 554 |
| 255 (+107) |  |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 15 | 549 |
| 256 (+15) |  |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 546 |
| 257 (-30) |  |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 545 |
| 258 (+31) |  |
18649 | Plate Special 1 x 2 with Handles on Ends | 4 | 543 |
| 259 (-1) |  |
3659 | Brick Arch 1 x 4 | 14 | 535 |
| 260 (-6) |  |
14716 | Brick 1 x 1 x 3 | 11 | 527 |
| 261 (+25) |  |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 522 |
| 262 (-22) |  |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 20 | 521 |
| 263 (-6) |  |
3030 | Plate 4 x 10 | 15 | 519 |
| 264 (+37) |  |
24309 | Slope Curved 3 x 2 No Studs | 11 | 516 |
| 265 (-14) |  |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 16 | 514 |
| 266 (+38) |  |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 9 | 514 |
| 267 (-22) |  |
64647 | Headwear Accessory Plume / Feather Triple Point | 9 | 514 |
| 268 (+7) |  |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 19 | 513 |
| 269 (-7) |  |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 6 | 512 |
| 270 (-38) |  |
3680 | Turntable 2 x 2 Plate, Base | 4 | 511 |
| 271 (-32) |  |
3709 | Technic Plate 2 x 4 [3 Holes] | 8 | 511 |
| 272 (-19) |  |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 16 | 510 |
| 273 (+10) |  |
13547 | Slope Curved 4 x 1 Inverted | 19 | 508 |
| 274 (-18) |  |
6589 | Technic Gear 12 Tooth Bevel | 2 | 506 |
| 275 (-23) |  |
6112 | 1×12 Brick | 12 | 501 |
| 276 (+37) |  |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 12 | 501 |
| 277 (-27) |  |
3702 | Technic Brick 1 x 8 [7 Holes] | 7 | 500 |
| 278 (-8) |  |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 13 | 490 |
| 279 (-1) |  |
88930 | Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes] | 19 | 489 |
| 280 (-13) |  |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 8 | 487 |
| 281 (-71) |  |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 483 |
| 282 (-1) |  |
4510 | Plate Special 1 x 8 with Door Rail | 9 | 482 |
| 283 (-4) |  |
92950 | Brick Arch 1 x 6 Raised Arch | 14 | 481 |
| 284 (+14) |  |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 9 | 480 |
| 285 (-9) |  |
60471 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side | 5 | 478 |
| 286 (-6) |  |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 11 | 478 |
| 287 (+12) |  |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 4 | 475 |
| 288 (+69) |  |
22961 | Technic Pin Connector Hub with 1 Axle | 6 | 475 |
| 289 (-28) |  |
15303 | Spring Shooter Ammunition 8L | 10 | 475 |
| 290 (+145) |  |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 6 | 473 |
| 291 (+268) |  |
32803 | Slope Curved 2 x 2 Inverted | 7 | 472 |
| 292 (-8) |  |
96874 | Brick and Axle Separator v2.0 | 3 | 471 |
| 293 (-24) |  |
4216 | Brick Special 1 x 2 with Groove | 9 | 470 |
| 294 (-35) |  |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise | 3 | 469 |
| 295 (-22) |  |
60849 | Equipment Hose Nozzle with Side String Hole Simplified | 4 | 469 |
| 296 (-2) |  |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 5 | 468 |
| 297 (-10) |  |
3703 | Technic Brick 1 x 16 [15 Holes] | 8 | 465 |
| 298 (-10) |  |
59349 | Panel 1 x 6 x 5 | 17 | 465 |
| 299 (-31) |  |
6232 | Brick Special 2 x 2 with Pin and Axle Hole | 7 | 461 |
| 300 (+89) |  |
22385 | Tile Special 2 x 3 Pentagonal | 20 | 457 |
| 301 (-52) |  |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 5 | 453 |
| 302 (+25) |  |
15403 | Plate Special 1 x 2 with Mini Blaster | 4 | 452 |
| 303 (-38) |  |
6111 | 1×10 Brick | 11 | 450 |
| 304 (-22) |  |
3829c01 | Vehicle Steering Stand 1 x 2 with Black Steering Wheel | 6 | 449 |
| 305 (-13) |  |
3684c | Slope 75┬░ 2 x 2 x 3 Smooth | 16 | 449 |
| 306 (+297) |  |
32828 | Plate Round 1 x 1 with Hole and Horizontal Bar | 3 | 447 |
| 307 (-61) |  |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 12 | 441 |
| 308 (+22) |  |
3029 | Plate 4 x 12 | 14 | 440 |
| 309 (-24) |  |
3007 | 2×8 Brick | 10 | 439 |
| 310 (+272) |  |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder | 10 | 437 |
| 311 (-18) |  |
60593 | Window 1 x 2 x 3 Flat Front | 12 | 434 |
| 312 (-21) |  |
2921 | Brick Special 1 x 1 with Handle | 10 | 432 |
| 313 (-7) |  |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 6 | 430 |
| 314 (-48) |  |
4079b | Minifig Seat 2 x 2 with Center Sprue Mark | 11 | 429 |
| 315 (-51) |  |
3045 | Slope 45┬░ 2 x 2 Double Convex | 17 | 426 |
| 316 (+38) |  |
3033 | Plate 6 x 10 | 14 | 423 |
| 317 (-54) |  |
2458 | Brick Special 1 x 2 with Pin | 7 | 420 |
| 318 (-28) |  |
43857 | Technic Beam 1 x 2 Thick | 7 | 417 |
| 319 (-3) |  |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 9 | 417 |
| 320 (-43) |  |
2419 | Wedge Plate 3 x 6 Cut Corners | 14 | 416 |
| 321 (-21) |  |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 6 | 414 |
| 322 (+75) |  |
18653 | Brick Modified 1 x 3 x 2 with Inside Bow | 16 | 413 |
| 323 (-18) |  |
41678 | Technic Axle and Pin Connector Perpendicular Double Split | 5 | 412 |
| 324 (-9) |  |
91988 | 2×14 Plate | 8 | 410 |
| 325 (-28) |  |
59426 | Technic Axle 5.5 With Stop [Rounded Short End] | 1 | 410 |
| 326 (-18) |  |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 17 | 409 |
| 327 (-15) |  |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 8 | 407 |
| 328 (-9) |  |
43888 | Support 1 x 1 x 6 Solid Pillar | 13 | 407 |
| 329 (-20) |  |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 14 | 406 |
| 330 (-23) |  |
2447 | Headwear Accessory Visor For Standard Helmet | 6 | 405 |
| 331 (+226) |  |
29120 | Wedge 2×1 with Stud Notch Left | 14 | 403 |
| 332 (-29) |  |
30602 | Slope Curved 2 x 2 Lip, No Studs | 21 | 403 |
| 333 (-38) |  |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 4 | 401 |
| 334 (+205) |  |
2417 | Plant, Leaves 6 x 5 | 10 | 401 |
| 335 (+240) |  |
29119 | Wedge 2×1 with Stud Notch Right | 14 | 401 |
| 336 (+103) |  |
24307 | Wedge Plate 2 x 2 Right | 14 | 393 |
| 337 (+65) |  |
18671 | Bracket 3 x 2 x 1 1/3 | 8 | 390 |
| 338 (+7) |  |
14696 | Technic Link, Reinforced, with Beveled Edge | 1 | 382 |
| 339 (-10) |  |
3895 | Technic Brick 1 x 12 [11 Holes] | 8 | 379 |
| 340 (-17) |  |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 378 |
| 341 (+1) |  |
2465 | 1×16 Brick | 11 | 377 |
| 342 (+108) |  |
24299 | Wedge Plate 2 x 2 Left | 14 | 375 |
| 343 (-29) |  |
3028 | Plate 6 x 12 | 17 | 375 |
| 344 (-24) |  |
3899 | Equipment Cup / Mug [Plain] | 6 | 374 |
| 345 (-43) |  |
2653 | Brick Special 1 x 4 with Groove | 2 | 372 |
| 346 (-2) |  |
6126b | Wave / Flame Rounded with Base Rim | 5 | 370 |
| 347 (+16) |  |
6180 | Tile Special 4 x 6 with Studs on Edges | 14 | 370 |
| 348 (-26) |  |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 370 |
| 349 (-31) |  |
2460 | Tile Special 2 x 2 with Pin | 6 | 369 |
| 350 (-11) |  |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 8 | 368 |
| 351 (-20) |  |
2736 | Technic Axle Towball | 1 | 366 |
| 352 (-42) |  |
42610 | Wheel 11 x 8 with Center Groove | 1 | 365 |
| 353 (-6) |  |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 7 | 363 |
| 354 (-21) |  |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 5 | 362 |
| 355 (-23) |  |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 14 | 359 |
| 356 (+59) |  |
18980 | Plate Round Corner 2 x 6 Double | 15 | 357 |
| 357 (+593) |  |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 6 | 352 |
| 358 (-3) |  |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 7 | 351 |
| 359 (+5) |  |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 11 | 350 |
| 360 (-32) |  |
32291 | Technic Axle and Pin Connector Perpendicular Double | 6 | 349 |
| 361 (-23) |  |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 349 |
| 362 (-12) |  |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 10 | 348 |
| 363 (+101) |  |
11253 | Sports Roller Skate | 8 | 347 |
| 364 (+18) |  |
13731 | Slope Curved 10 x 1 [Symmetric Inside Ridges] | 18 | 345 |
| 365 (-29) |  |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 15 | 345 |
| 366 (+44) |  |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 11 | 345 |
| 367 (+70) |  |
23443 | 3.2 SHAFT W/3.2 HOLE | 6 | 341 |
| 368 (-12) |  |
43898 | Dish 3 x 3 Inverted [Radar] | 18 | 338 |
| 369 (-28) |  |
30553 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole | 4 | 337 |
| 370 (+7) |  |
88292 | Brick Arch 1 x 3 x 2 | 11 | 337 |
| 371 (-18) |  |
92438 | Plate 8 x 16 | 22 | 337 |
| 372 (-23) |  |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 3 | 334 |
| 373 (+44) |  |
98100 | Brick Round 2 x 2 Truncated Cone | 7 | 334 |
| 374 (+13) |  |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 10 | 334 |
| 375 (-54) |  |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 5 | 333 |
| 376 (-42) |  |
30236 | Brick Special 1 x 2 with Handle | 7 | 332 |
| 377 (-18) |  |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 331 |
| 378 (-32) |  |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 329 |
| 379 (-13) |  |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 6 | 329 |
| 380 (-69) |  |
2476 | Plate Special 2 x 2 with Pin on Bottom | 3 | 328 |
| 381 (+38) |  |
11609 | Star with Stud Holder | 5 | 328 |
| 382 (-14) |  |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 6 | 327 |
| 383 (-11) |  |
55013 | Technic Axle 8 with Stop | 1 | 327 |
| 384 (-24) |  |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 321 |
| 385 (-34) |  |
41539 | Plate 8 x 8 | 17 | 321 |
| 386 (+15) |  |
11213 | Plate Round 6 x 6 with Hole | 14 | 321 |
| 387 (-47) |  |
4488 | Plate Special 2 x 2 with Wheel Holder | 2 | 317 |
| 388 (+107) |  |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 5 | 314 |
| 389 (-22) |  |
3707 | Technic Axle 8 | 2 | 311 |
| 390 (-20) |  |
94925 | Technic Gear 16 Tooth Reinforced [New Style] | 1 | 309 |
| 391 (-15) |  |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 6 | 308 |
| 392 (+133) |  |
27507 | Tile 4 x 4 Macaroni | 16 | 308 |
| 393 (+49) |  |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 305 |
| 394 (+58) |  |
6003 | Plate Round Corner 6 x 6 | 13 | 305 |
| 395 (+194) |  |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow(2 x 2 x 1) and Axle Holes(Crossholes) at each end | 8 | 304 |
| 396 (+13) |  |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 303 |
| 397 (-22) |  |
60485 | Technic Axle 9 | 2 | 303 |
| 398 (-46) |  |
3633 | Fence 1 x 4 x 1 | 7 | 303 |
| 399 (-34) |  |
16770 | Barb Large (Claw, Talon) with Clip | 11 | 303 |
| 400 (-26) |  |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 10 | 302 |
| 401 (-32) |  |
15400 | Brick Special – Spring Shooter 1 x 4 with Light Bluish Gray Top | 1 | 302 |
| 402 (-29) |  |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 301 |
| 403 (-66) |  |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 9 | 301 |
| 404 (+41) |  |
89522 | Horn (Unicorn) | 12 | 301 |
| 405 (-27) |  |
4600 | Plate Special 2 x 2 with Wheel Holders | 3 | 299 |
| 406 (-82) |  |
50745 | Mudguard 4 x 2 1/2 x 2 with Arch Round | 16 | 297 |
| 407 (-64) |  |
3679 | Turntable 2 x 2 Plate – Top | 1 | 297 |
| 408 (-27) |  |
32056 | Technic Beam 3 x 3 L-Shape Thin | 6 | 296 |
| 409 (+56) |  |
22888 | Plate Round Corner 4 x 8 Double | 19 | 296 |
| 410 (-24) |  |
4865a | Panel 1 x 2 x 1 [Square Corners] | 12 | 296 |
| 411 (+30) |  |
87609 | Plate Special 2 x 6 x 2/3 [Four Studs on Side] | 14 | 296 |
| 412 (-54) |  |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 8 | 294 |
| 413 (-20) |  |
60476 | Brick Special 1 x 1 with Clip Horizontal | 3 | 293 |
| 414 (-19) |  |
50304 | Wedge Plate 8 x 3 Right | 14 | 292 |
| 415 (-25) |  |
50305 | Wedge Plate 8 x 3 Left | 14 | 291 |
| 416 (-13) |  |
2496 | Wheel Skateboard / Trolley | 2 | 290 |
| 417 (-37) |  |
32063 | Technic Beam 1 x 6 Thin | 4 | 289 |
| 418 (+18) |  |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 7 | 287 |
| 419 (-27) |  |
30363 | Slope 18┬░ 4 x 2 | 11 | 284 |
| 420 (-29) |  |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | 7 | 283 |
| 421 — |  |
87081 | Brick Round 4 x 4 [Centre Hole] | 9 | 281 |
| 422 (-74) |  |
32001 | Technic Plate 2 x 6 [5 Holes] | 6 | 280 |
| 423 (-27) |  |
64782 | Technic Panel 1 x 5 x 11 | 12 | 280 |
| 424 (-36) |  |
30165 | Brick Curved 2 x 2 with Two Top Studs | 15 | 280 |
| 425 (+30) |  |
64179 | Technic Beam 5 x 7 Open Center Thick | 3 | 276 |
| 426 (-27) |  |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 13 | 276 |
| 427 (+21) |  |
13548 | Wedge 2 x 2 (Slope 45┬░ Corner) | 9 | 276 |
| 428 (-57) |  |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 10 | 274 |
| 429 — |  |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 9 | 273 |
| 430 (+56) |  |
15458 | Technic Panel 3 X 11 x 1 | 11 | 273 |
| 431 (-47) |  |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 10 | 271 |
| 432 (-1) |  |
32474 | Technic Ball Joint | 12 | 269 |
| 433 (+1) |  |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Ball | 1 | 264 |
| 434 (-9) |  |
2343 | Equipment Goblet | 6 | 261 |
| 435 (+45) |  |
2723 | Technic Disk 3 x 3 | 3 | 260 |
| 436 (-20) |  |
3942c | Cone 2 x 2 x 2 [Completely Open Stud] | 15 | 259 |
| 437 (-37) |  |
92907 | Technic Axle and Pin Connector Perpendicular Split | 4 | 258 |
| 438 (-27) |  |
3830 | Hinge Brick 1 x 4 [Upper] | 9 | 258 |
| 439 (-26) |  |
3831 | Hinge Brick 1 x 4 [Lower] | 9 | 258 |
| 440 (-16) |  |
15391 | Weapon Gun / Blaster / Shooter Mini | 6 | 257 |
| 441 (-29) |  |
98282 | Mudguard 4 x 2 1/2 x 1 with Arch Round | 9 | 257 |
| 442 (+25) |  |
6106 | Wedge Plate 6 x 6 Cut Corner | 9 | 256 |
| 443 (-17) |  |
30552 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 3 | 255 |
| 444 (+22) |  |
4490 | Brick Arch 1 x 3 | 8 | 253 |
| 445 (-13) |  |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 253 |
| 446 (-42) |  |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 252 |
| 447 (-62) |  |
30162 | Equipment Binoculars | 4 | 252 |
| 448 (+798) |  |
36841 | Bracket 1 x 1 – 1 x 1 | 7 | 252 |
| 449 (-27) |  |
57895 | Glass for Window 1 x 4 x 6 | 8 | 250 |
| 450 (+38) |  |
87414 | Tyre Offset Tread Small with Band around Center of Tread | 1 | 250 |
| 451 (-24) |  |
22667 | Plant, Cherries | 3 | 249 |
| 452 (+5) |  |
47398 | Wedge Plate 12 x 3 Right | 10 | 246 |
| 453 (-55) |  |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 6 | 245 |
| 454 (-26) |  |
30031 | Minifig Handlebars | 6 | 244 |
| 455 (+39) |  |
15456 | Plate Special 2 x 2 with Towball and Hole | 2 | 242 |
| 456 (-3) |  |
41669 | Technic Tooth 1 x 3 with Axle Hole | 17 | 242 |
| 457 (+4) |  |
47456 | Brick Wedged 2 x 3 x 2/3 Two Studs, Wing End | 17 | 242 |
| 458 (-14) |  |
11610 | Food Ice Cream Cone | 8 | 241 |
| 459 (-53) |  |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 2 | 240 |
| 460 (-17) |  |
30157 | Plate Special 2 x 4 with Pins | 3 | 240 |
| 461 (+28) |  |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 4 | 238 |
| 462 (-3) |  |
46212 | Brick 1 x 2 x 5 without Side Supports | 8 | 238 |
| 463 (+24) |  |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 13 | 238 |
| 464 (-56) |  |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 238 |
| 465 (-19) |  |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 4 | 236 |
| 466 (-33) |  |
32072 | Technic Knob Wheel | 2 | 232 |
| 467 (-27) |  |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 10 | 232 |
| 468 (+58) |  |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 15 | 231 |
| 469 (+5) |  |
2639 | 4×4 Plate, Corner | 3 | 228 |
| 470 (-65) |  |
92690 | Bar 1L with Top Stud and Two Side Studs | 4 | 227 |
| 471 (-88) |  |
42446 | Neckwear Bracket [One Stud] | 6 | 225 |
| 472 (+12) |  |
47397 | Wedge Plate 12 x 3 Left | 10 | 225 |
| 473 (+42) |  |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 7 | 224 |
| 474 (+9) |  |
3297 | Slope 33┬░ 3 x 4 | 11 | 224 |
| 475 (+15) |  |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 2 | 222 |
| 476 (-18) |  |
24375 | Rubber Technic Tread Attachment | 2 | 222 |
| 477 (+23) |  |
99008 | Technic Axle 4 with Centre Stop | 1 | 221 |
| 478 (+21) |  |
16577 | Brick Arch 1 x 8 x 2 Raised | 10 | 219 |
| 479 (-30) |  |
74261 | Hero Factory Joint Extender [High Friction] | 1 | 218 |
| 480 (+24) |  |
61485 | Turntable 4 x 4 Square Base, Locking | 3 | 217 |
| 481 (-5) |  |
30145 | Brick 2 x 2 x 3 | 9 | 217 |
| 482 (-26) |  |
3038 | Slope 45┬░ 2 x 3 | 6 | 216 |
| 483 (-5) |  |
33243 | Brick Modified 1 x 3 x 2 with Curved Top | 17 | 216 |
| 484 (-21) |  |
3708 | Technic Axle 12 | 2 | 215 |
| 485 (-47) |  |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 215 |
| 486 (-63) |  |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 11 | 214 |
| 487 (-40) |  |
3738 | Technic Plate 2 x 8 [7 Holes] | 7 | 213 |
| 488 (-3) |  |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 12 | 213 |
| 489 (+129) |  |
22890 | Plate Special 1 x 2 with End Towball | 1 | 212 |
| 490 (-17) |  |
6157 | Plate Special 2 x 2 with Wheels Holder Wide | 3 | 211 |
| 491 (+300) |  |
27261 | Plate Special 2 x 3 with rocks | 6 | 210 |
| 492 (-23) |  |
33299a | Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank | 3 | 206 |
| 493 (+105) |  |
24855 | Plant, Stem with Bottom Pin | 2 | 204 |
| 494 (-15) |  |
32059 | Wedge Plate 4 x 6 Cut Corners | 16 | 204 |
| 495 (+26) |  |
30099 | Brick Arch 1 x 5 x 4 Inverted | 12 | 203 |
| 496 (-28) |  |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 201 |
| 497 (+102) |  |
36752a | Equipment Wand [Individual] | 7 | 200 |
| 498 — |  |
57909 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 3 | 199 |
| 499 (+89) |  |
17485 | Brick Round 2 x 2 with Pin Holes | 8 | 199 |
| 500 (-29) |  |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 17 | 199 |
| 501 (+35) |  |
85943 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 2 | 198 |
| 502 (+25) |  |
18977 | Tyre 24 x 12 Low Profile | 1 | 198 |
| 503 (-6) |  |
3743 | Technic Gear Rack 1 x 4 | 3 | 197 |
| 504 (+27) |  |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 197 |
| 505 (-2) |  |
95344 | Bucket 1 x 1 x 1 Handle | 4 | 197 |
| 506 (-52) |  |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 8 | 197 |
| 507 (-35) |  |
42022 | Slope Curved 6 x 1 | 14 | 197 |
| 508 (-129) |  |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 196 |
| 509 (+1) |  |
3006 | 2×10 Brick | 9 | 194 |
| 510 (+8) |  |
30044 | Window 1 x 2 x 2 2/3 with Rounded Top | 10 | 194 |
| 511 (+41) |  |
40344 | Technic Brick 4 x 6 Open Center | 3 | 193 |
| 512 (-3) |  |
91405 | Plate 16 x 16 | 17 | 193 |
| 513 (+42) |  |
15209 | Plate 1 x 2 Special with Two Vertical Teeth | 6 | 192 |
| 514 (-6) |  |
6215 | Brick Curved 2 x 3 with Curved Top | 13 | 192 |
| 515 (-14) |  |
61482 | Equipment Handcuffs | 3 | 191 |
| 516 (-56) |  |
11618 | Headwear Accessory Bow with Heart, Long Ribbon and Pin | 5 | 191 |
| 517 (+20) |  |
4175 | Plate Special 1 x 2 with Ladder | 8 | 191 |
| 518 (-4) |  |
3737 | Technic Axle 10 | 2 | 190 |
| 519 (-99) |  |
3742 | Plant, Flower – Small | 5 | 190 |
| 520 (-102) |  |
90640 | Hero Factory Armor with Ball Joint Socket – Size 4 | 24 | 190 |
| 521 (-44) |  |
42023 | Slope Curved 6 x 1 Inverted | 10 | 189 |
| 522 (-16) |  |
92338 | Chain 5 links | 5 | 188 |
| 523 (-72) |  |
55982 | Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes | 4 | 186 |
| 524 (+57) |  |
33078 | Food Hot Dog / Sausage | 6 | 186 |
| 525 (-2) |  |
4345 | Box 2 x 2 x 2 [Hollow Studs] | 6 | 186 |
| 526 (-35) |  |
6191 | Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top, with Raised Inside Support | 19 | 184 |
| 527 (+96) |  |
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | 11 | 183 |
| 528 (+18) |  |
40379 | Dinosaur Tail End Section | 13 | 182 |
| 529 (-24) |  |
60608 | Window 1 x 2 x 3 Pane with Thick Corner Tabs | 5 | 181 |
| 530 (-17) |  |
98585 | Hero Factory Weapon Barrel with 2 Pin Holes and 3 Axle Holes | 7 | 181 |
| 531 (-14) |  |
30526 | Brick Special 1 x 2 with 2 Pins | 2 | 180 |
| 532 (+33) |  |
11208 | Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes | 5 | 180 |
| 533 (-5) |  |
4346 | Box 2 x 2 x 2 Door with Slot | 6 | 180 |
| 534 (+9) |  |
2655 | Plate, Round 2 x 2 Thin with Wheel Holder | 1 | 180 |
| 535 (-23) |  |
58247 | Weapon Gun / Blaster Short (Star Wars) | 4 | 179 |
| 536 (-44) |  |
3960 | Dish 4 x 4 Inverted [Radar] | 19 | 179 |
| 537 (-18) |  |
92738 | Weapon Gun / Blaster Small (Star Wars) | 2 | 176 |
| 538 (-36) |  |
92410 | Cupboard 2 x 3 x 2 with Solid Studs | 10 | 176 |
| 539 (+12) |  |
11946 | Technic Panel Fairing #21 Very Small Smooth, Side B | 19 | 175 |
| 540 (+400) |  |
37352 | Brick 1 x 2 x 1 Curved No Studs | 9 | 174 |
| 541 (-30) |  |
76766 | Bracket 5 x 2 x 2 1/3 | 4 | 172 |
| 542 (-49) |  |
32187 | Technic Driving Ring Extension | 3 | 171 |
| 543 (+13) |  |
11947 | Technic Panel Fairing #22 Very Small Smooth, Side A | 19 | 171 |
| 544 (-15) |  |
4006 | Tool Screwdriver and Spanner / Wrench | 2 | 169 |
| 545 (-23) |  |
60219 | Slope Inverted 45┬░ 6 x 4 Double with 4 x 4 Cutout and 3 Holes | 10 | 168 |
| 546 (-6) |  |
98721 | Weapon Batarang | 4 | 167 |
| 547 (+25) |  |
18946 | Technic Gear 16 Tooth with Clutch on Both Sides | 1 | 167 |
| 548 (+6) |  |
64648 | Fish [Anti-Stud Mouth] | 5 | 165 |
| 549 (+30) |  |
14718 | Panel 1 x 4 x 2 with Side Supports – Hollow Studs | 9 | 165 |
| 550 (-30) |  |
19220 | Equipment Radio [Extended Handle, Expanded Speaker Grille] | 2 | 164 |
| 551 (-6) |  |
43710 | Wedge 4 x 2 Triple Left | 18 | 164 |
| 552 (-3) |  |
90258 | Brick Special 2 x 2 with Grooves and Axle Hole | 1 | 164 |
| 553 (+21) |  |
6182 | Brick Arch 1 x 4 x 2 | 11 | 163 |
| 554 (+107) |  |
27940 | BEAM 1 with 2 CROSS AXLE [180 DEG] | 1 | 163 |
| 555 (-8) |  |
93160 | Dog Bone [Short] | 1 | 163 |
| 556 (+204) |  |
26287 | Technic Driving Ring Connector Smooth | 2 | 162 |
| 557 (-27) |  |
15092 | Plate 2 x 2 with 2 Pins | 1 | 162 |
| 558 (+83) |  |
21445 | Plate Special 1 x 2 with Wheel Holder | 2 | 161 |
| 559 (-52) |  |
2569 | Antenna Whip 8H | 5 | 161 |
| 560 (-22) |  |
40345 | Technic Brick 6 x 8 with Open Center 4 x 6 | 3 | 160 |
| 561 (-99) |  |
98286 | Hinge Plate 2 x 4 with Pin Hole – Top | 2 | 159 |
| 562 (+380) |  |
35464 | Slope Double 45┬░ 1 x 1 | 4 | 159 |
| 563 (+10) |  |
4218 | Garage Roller Door Section without Handle | 5 | 159 |
| 564 (-14) |  |
3046 | Slope 45┬░ 2 x 2 Double Concave | 6 | 159 |
| 565 (-4) |  |
61780 | Container Box 2 x 2 x 2 – Top Opening | 4 | 158 |
| 566 (-22) |  |
4735 | Bar 1 x 3 [Clip / Anti-Stud] | 2 | 157 |
| 567 (-35) |  |
4595 | Brick Special 1 x 2 x 2/3 with Studs on Sides | 3 | 157 |
| 568 (-6) |  |
43713 | Wedge 6 x 4 Inverted Curved | 15 | 157 |
| 569 (+43) |  |
44568 | Hinge Plate 1 x 4 Locking Dual 1 Finger | 2 | 155 |
| 570 (+105) |  |
25893 | Plate Round 1 x 1 with Open Stud and Bar on Underside | 1 | 155 |
| 571 (+24) |  |
14720 | Technic Beam 3 x 5 Thick [90┬░ Offset Centre Beam Holes] | 3 | 154 |
| 572 (-158) |  |
93571 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | 3 | 154 |
| 573 (-4) |  |
90195 | Window 1 x 2 x 2 Castle | 5 | 154 |
| 574 (-58) |  |
41854 | Mudguard 2 x 4 with Flared Wings | 14 | 153 |
| 575 (+65) |  |
3648 | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | 1 | 153 |
| 576 (+15) |  |
18948 | Technic Driving Ring Connector | 1 | 153 |
| 577 (-29) |  |
2462 | Facet 3 x 3 | 4 | 152 |
| 578 (-14) |  |
92099 | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 4 | 152 |
| 579 (-46) |  |
52031 | Wedge 4 x 6 x 2/3 Triple Curved | 18 | 151 |
| 580 (+22) |  |
87618 | Bar 5L with Handle (Friction Ram) | 3 | 149 |
| 581 (+28) |  |
4590 | Plate Special 1 x 4 Offset | 5 | 149 |
| 582 (+8) |  |
30340 | Equipment Flotation Ring [Life Preserver] | 7 | 149 |
| 583 (+81) |  |
98834 | Vehicle, Spoiler 2 x 4 with Handle | 10 | 149 |
| 584 (-16) |  |
32138 | Technic Pin Double with Axle Hole | 2 | 148 |
| 585 (-18) |  |
6259 | Cylinder Half 2 x 4 x 4 | 7 | 148 |
| 586 (+10) |  |
11209 | Tyre 21 x 9.9 | 1 | 148 |
| 587 (+35) |  |
30355 | Wedge Plate 6 x 12 Left | 8 | 147 |
| 588 (-35) |  |
62113 | Bar 1 x 4 x 3 [End Tabs] | 6 | 146 |
| 589 (+41) |  |
64225 | Wedge Curved 4 x 3 [No Studs] | 14 | 146 |
| 590 (+7) |  |
45590 | Technic Axle Connector Double Flexible [Rubber] | 1 | 146 |
| 591 (+30) |  |
93058 | Weapon Throwing Star / Shuriken with Textured Grips | 2 | 145 |
| 592 (+9407) |  |
49307 | Plate 1 x 1 x 2/3 Double Curved Top, No Studs | 7 | 145 |
| 593 (-22) |  |
3676 | Slope Inverted 45┬░ 2 x 2 Double Convex | 11 | 145 |
| 594 (-124) |  |
90609 | Hero Factory Arm 5 L/ Leg with Ball Joint on Axle and Ball Socket | 7 | 144 |
| 595 (+34) |  |
30356 | Wedge Plate 6 x 12 Right | 8 | 144 |
| 596 (-19) |  |
72454 | Slope Inverted 45┬░ 4 x 4 Double | 8 | 144 |
| 597 (-73) |  |
98139 | Weapon Sai | 3 | 143 |
| 598 (+175) |  |
32606 | Plant, Minifig Accessory Flower with 7 Thick Petals and Pin | 3 | 142 |
| 599 (+40) |  |
15397 | Plate 3 x 3 Cross | 7 | 142 |