Most Common LEGO Parts
Have you wondered which LEGO part is most common, or which part comes in the most colors? Here’s your chance!
If you just want to see the complete list of the top 1000 most common LEGO parts, scroll down…
2022’s Biggest Winners & Losers
The rise of tiny pieces
Year after year, some of the very smallest LEGO pieces continue to rise to the top of the charts. The quarter round piece has jumped to 9th place this year, up from 14th last year, and 36th place the year before that. Even the classic 1×1 Tile just broke into the top 10 list.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 9 (+5) |  |
25269 | Tile Round 1 x 1 Quarter | 48 | 16046 |
| 10 (+3) |  |
3070b | 1×1 Tile | 46 | 15001 |
This is a meteoric rise, especially when you consider that both of these tiny parts have now surpassed every single ‘brick’, including the iconic 1×2 brick.
My cynical theory is that The LEGO Group is using this tiny and inexpensive part to inflate part counts, especially with the (likely profitable) DOTS line. That said, these parts, and the classic 1×1 tile in particular are especially popular in sets aimed at AFOLs, and there have been a lot more of those sets in recent years!
The fall of basic bricks and plates
While we are only talking about a drop of two spots in the rankings, these classic parts are getting squeezed out of the top spots. While they remain extremely common, it is clear that tiny parts, and parts used for smooth detailing in particular are putting the squeeze on the most iconic pieces.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 11 (-2) |  |
3004 | 1×2 Brick | 43 | 14548 |
| 12 (-2) |  |
3005 | 1×1 Brick | 51 | 14010 |
| 13 (-2) |  |
3020 | 2×4 Plate | 40 | 13324 |
| 14 (-2) |  |
3022 | 2×2 Plate | 33 | 12427 |
The (relative) fall of Technic elements
I do not think that there is anything especially sinister at play here, but rather that LEGO Technic is a small and stable product line with around 15 new sets a year. Given the huge increase in system-based sets aimed at the AFOL community, Technic elements appear to be decreasing in popularity over time.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 35 (-9) |  |
4274 | Technic Pin 1/2 | 3 | 6354 |
| 38 (-3) |  |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5456 |
| 72 (-10) |  |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 3 | 3168 |
| 80 (-13) |  |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 7 | 2790 |
Blossoming of foliage
The world our minfigures (and minidolls) inhabit is getting greener, literally. As you can see, almost every plant/foliage element is gaining popularity.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 28 (+9) |  |
24866 | Plant, Flower, Plate Round 1 x 1 with 5 Petals | 19 | 7175 |
| 91 (+21) |  |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 15 | 2454 |
| 235 — |  |
2423 | Plant, Leaves 4 x 3 | 11 | 814 |
| 281 (+43) |  |
32606 | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin | 4 | 615 |
| 300 (+23) |  |
2417 | Plant, Leaves 6 x 5 | 15 | 582 |
| 381 (+97) |  |
37695 | Plant, Stem with 3 Leaves and Bottom Pin | 3 | 378 |
SNOT’s not going anywhere
Older SNOT elements are largely holding their own against a competitive parts landscape, while newer parts keep climbing the charts.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 45 (-1) |  |
87087 | 1×1 Brick, Stud 1-side | 32 | 4651 |
| 47 (+1) |  |
99780 | 1×2 Bracket, Inverted | 22 | 4475 |
| 49 (+1) |  |
99207 | 2×2 Bracket, Inverted | 18 | 4298 |
| 51 (-4) |  |
4070 | 1×1 Brick, Headlight | 21 | 4171 |
| 52 (+2) |  |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 14 | 4106 |
| 54 (+3) |  |
11211 | 1×2 Brick, 2 Studs 1-side | 25 | 3880 |
| 64 (-1) |  |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 20 | 3576 |
| 68 (-3) |  |
44728 | 2×2 Bracket | 20 | 3263 |
| 69 (+13) |  |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 18 | 3242 |
| 86 — |  |
99781 | Bracket 1 x 2 – 1 x 2 | 19 | 2662 |
| 106 (-1) |  |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 14 | 2091 |
| 119 (+37) |  |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 15 | 1767 |
| 153 (+62) |  |
36841 | Bracket 1 x 1 – 1 x 1 | 18 | 1400 |
| 178 (+3) |  |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 12 | 1184 |
Most notably, those very small SNOT elements continue to climb the charts. Remember, 36840/36841 were only introduced in 2018, and in relatively few sets at first!
Giant sets re-shape the ranking.
For example, the new 10,001 piece Eiffel Tower contains: 256x of 78258 (doubling quantities of that part), 660x of 23443 (increasing quantities of that part by 50% overnight), and 345x of 37762 (increasing it by 33%).
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 133 (+80) |  |
23443 | Bar Holder with Hole and Bar Handle | 10 | 1621 |
| 169 (+147) |  |
37762 | Equipment Candle Stick | 10 | 1254 |
| 308 (+663) |  |
78258 | Bar 2L with Stop in Center | 4 | 557 |
2018-2022 Most Common LEGO Parts
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 1 — |  |
4073 | 1×1 Plate, Round | 51 | 45016 |
| 2 — |  |
3023 | 1×2 Plate | 53 | 41375 |
| 3 — |  |
98138 | 1×1 Tile, Round | 60 | 37618 |
| 4 — |  |
3024 | 1×1 Plate | 48 | 31875 |
| 5 — |  |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 23907 |
| 6 — |  |
54200 | 1×1 Slope 30° (Cheese) | 52 | 17090 |
| 7 — |  |
3069b | 1×2 Tile | 50 | 16645 |
| 8 — |  |
3710 | 1×4 Plate | 39 | 16377 |
| 9 (+5) | |
25269 | Tile Round 1 x 1 Quarter | 48 | 16046 |
| 10 (+3) | |
3070b | 1×1 Tile | 46 | 15001 |
| 11 (-2) | |
3004 | 1×2 Brick | 43 | 14548 |
| 12 (-2) | |
3005 | 1×1 Brick | 51 | 14010 |
| 13 (-2) | |
3020 | 2×4 Plate | 40 | 13324 |
| 14 (-2) | |
3022 | 2×2 Plate | 33 | 12427 |
| 15 — |  |
15573 | 1×2 Jumper | 39 | 10422 |
| 16 — |  |
6558 | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 1 | 10003 |
| 17 (+1) |  |
3623 | 1×3 Plate | 35 | 9954 |
| 18 (-1) |  |
3021 | 2×3 Plate | 32 | 9893 |
| 19 (+1) |  |
3666 | 1×6 Plate | 35 | 9570 |
| 20 (+4) |  |
85984 | 1×2 Slope 30° (Double Cheese) | 37 | 8425 |
| 21 (+6) |  |
85861 | 1×1 Plate, Round w/ hole | 19 | 8366 |
| 22 — |  |
3010 | 1×4 Brick | 39 | 8358 |
| 23 (-2) |  |
2431 | 1×4 Tile | 45 | 8357 |
| 24 (-5) |  |
2412 | Tile Special 1 x 2 Grille without Bottom Groove | 22 | 8327 |
| 25 (-2) |  |
11477 | 2×1 Curved | 41 | 8203 |
| 26 (-1) |  |
2420 | 2×2 Plate, Corner | 25 | 8059 |
| 27 (+1) |  |
15068 | 2×2 Curved | 39 | 7419 |
| 28 (+9) | |
24866 | Plant, Flower, Plate Round 1 x 1 with 5 Petals | 19 | 7175 |
| 29 — |  |
3001 | 2×4 Brick | 31 | 6925 |
| 30 — |  |
3003 | 2×2 Brick | 37 | 6778 |
| 31 — |  |
3062b | Brick Round 1 x 1 Open Stud | 38 | 6700 |
| 32 (+2) |  |
3068b | 2×2 Tile | 39 | 6666 |
| 33 (-1) |  |
87079 | 2×4 Tile | 40 | 6626 |
| 34 (-1) |  |
3795 | 2×6 Plate | 35 | 6470 |
| 35 (-9) | |
4274 | Technic Pin 1/2 | 3 | 6354 |
| 36 — |  |
4032 | 2×2 Plate, Round w/ Axle | 29 | 5595 |
| 37 (+2) |  |
6636 | 1×6 Tile | 31 | 5565 |
| 38 (-3) | |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5456 |
| 39 (+4) |  |
3622 | 1×3 Brick | 30 | 5376 |
| 40 (-2) |  |
87580 | 2×2 Jumper | 40 | 5284 |
| 41 (+1) |  |
63864 | 1×3 Tile | 35 | 5187 |
| 42 (-2) |  |
3040 | 2×1 Slope 45° | 35 | 4960 |
| 43 (+2) |  |
3460 | 1×8 Plate | 31 | 4755 |
| 44 (-3) |  |
15712 | 1×1 Clip, Top | 20 | 4741 |
| 45 (-1) | |
87087 | 1×1 Brick, Stud 1-side | 32 | 4651 |
| 46 (+15) |  |
35480 | Plate Special 1 x 2 Rounded with 2 Open Studs | 20 | 4619 |
| 47 (+1) | |
99780 | 1×2 Bracket, Inverted | 22 | 4475 |
| 48 (-2) |  |
32062 | Technic Axle 2 Notched | 2 | 4347 |
| 49 (+1) | |
99207 | 2×2 Bracket, Inverted | 18 | 4298 |
| 50 (-1) |  |
3941 | 2×2 Brick, Round w/ Axle | 34 | 4193 |
| 51 (-4) | |
4070 | 1×1 Brick, Headlight | 21 | 4171 |
| 52 (+2) | |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 14 | 4106 |
| 53 (-1) |  |
3009 | 1×6 Brick | 29 | 3938 |
| 54 (+3) | |
11211 | 1×2 Brick, 2 Studs 1-side | 25 | 3880 |
| 55 (-4) |  |
32028 | 1×2 Plate w/ Door Rail | 23 | 3845 |
| 56 (-3) |  |
4589 | 1×1 Cone | 38 | 3816 |
| 57 (-2) |  |
6091 | 1×2×1⅔ Curved | 33 | 3792 |
| 58 (+13) |  |
20482 | Tile Round 1 x 1 with Hollow Bar | 18 | 3782 |
| 59 (+21) |  |
33909 | Plate Special 2 x 2 with Only 2 studs | 20 | 3709 |
| 60 (-2) |  |
4162 | 1×8 Tile | 27 | 3663 |
| 61 (-5) |  |
2357 | 2×2 Brick, Corner | 22 | 3636 |
| 62 (+2) |  |
98283 | 1×2 Brick, Masonry | 12 | 3629 |
| 63 (+3) |  |
4085 | Plate Special 1 x 1 with Clip Vertical [Thin Open O Clip] | 17 | 3614 |
| 64 (-1) | |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 20 | 3576 |
| 65 (-6) |  |
3034 | 2×8 Plate | 32 | 3497 |
| 66 (-6) |  |
2877 | Brick Special 1 x 2 with Grill | 12 | 3402 |
| 67 (+18) |  |
99563 | Tile Special 1 x 2 with Sloped Walls AKA Money / Gold Bar [Ingot] | 20 | 3399 |
| 68 (-3) | |
44728 | 2×2 Bracket | 20 | 3263 |
| 69 (+13) | |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 18 | 3242 |
| 70 (-2) |  |
30136 | 1×2 Brick, Log (Palisade) | 14 | 3210 |
| 71 (+1) |  |
3660 | 2×2 Slope 45°, Inverted | 30 | 3194 |
| 72 (-3) |  |
41740 | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 28 | 3182 |
| 73 (-11) | |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 3 | 3168 |
| 74 (+1) |  |
92280 | 1×2 Plate w/ Clip, Top | 10 | 2951 |
| 75 (+2) |  |
3665 | 2×1 Slope 45°, Inverted | 34 | 2910 |
| 76 — |  |
18654 | Technic Pin Connector Round 1L [Beam] | 18 | 2906 |
| 77 (-7) |  |
3700 | 1×2 Technic Brick, 1 Hole | 17 | 2902 |
| 78 (+24) |  |
27925 | Tile 2 x 2 Curved, Macaroni | 37 | 2850 |
| 79 (-6) |  |
3039 | 2×2 Slope 45° | 34 | 2794 |
| 80 (-13) | |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] | 7 | 2790 |
| 81 (-7) |  |
2654 | 2×2 Round, Boat Stud | 29 | 2789 |
| 82 (-3) |  |
4519 | Technic Axle 3 | 2 | 2746 |
| 83 (-2) |  |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 23 | 2729 |
| 84 (+15) |  |
24246 | Tile Round 1 x 1 Half Circle | 35 | 2692 |
| 85 (+16) |  |
26603 | 2×3 Tile | 25 | 2664 |
| 86 — | |
99781 | Bracket 1 x 2 – 1 x 2 | 19 | 2662 |
| 87 (-9) |  |
59443 | Technic Axle Connector | 13 | 2577 |
| 88 (+12) |  |
26601 | Wedge Plate 2 x 2 Cut Corner | 27 | 2478 |
| 89 (+1) |  |
93273 | 4×1 Curved, Double | 31 | 2474 |
| 90 (-6) |  |
60478 | 1×2 Plate w/ Handle, End | 21 | 2473 |
| 91 (+21) | |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 15 | 2454 |
| 92 (-9) |  |
63868 | 1×2 Plate w/ Clip End, Horizontal | 18 | 2451 |
| 93 (-4) |  |
4477 | 1×10 Plate | 21 | 2416 |
| 94 (-3) |  |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 19 | 2286 |
| 95 (-3) |  |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 2265 |
| 96 (-8) |  |
48336 | 1×2 Plate w/ Handle, Side | 13 | 2237 |
| 97 (-4) |  |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] | 20 | 2232 |
| 98 (-11) |  |
3713 | Technic Bush | 3 | 2189 |
| 99 (-5) |  |
3031 | Plate 4 x 4 | 24 | 2182 |
| 100 (-2) |  |
87994 | Bar 3L | 10 | 2170 |
| 101 (+27) |  |
49307 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 22 | 2170 |
| 102 (-7) |  |
50950 | 3×1 Curved | 30 | 2146 |
| 103 (-7) |  |
24201 | Slope Curved 2 x 1 Inverted | 24 | 2137 |
| 104 (+5) |  |
18674 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 19 | 2128 |
| 105 (+22) |  |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 23 | 2108 |
| 106 (-1) | |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 14 | 2091 |
| 107 (-1) |  |
3002 | 2×3 Brick | 19 | 2070 |
| 108 (+7) |  |
26047 | Plate Special 1 x 1 Rounded with Handle | 10 | 2069 |
| 109 (-12) |  |
32064 | 1×2 Technic Brick, 1 Axle Hole | 16 | 2051 |
| 110 (+32) |  |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 21 | 1989 |
| 111 (-4) |  |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 20 | 1913 |
| 112 (+42) |  |
32828 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 13 | 1899 |
| 113 (-9) |  |
6541 | Technic Brick 1 x 1 with Hole | 19 | 1874 |
| 114 (-4) |  |
3032 | Plate 4 x 6 | 26 | 1867 |
| 115 (-12) |  |
3673 | Technic Pin without Friction Ridges Lengthwise | 2 | 1840 |
| 116 (+20) |  |
3008 | 1×8 Brick | 18 | 1834 |
| 117 (-6) |  |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 6 | 1802 |
| 118 (-5) |  |
32523 | Technic Beam 1 x 3 Thick | 18 | 1773 |
| 119 (+37) | |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 15 | 1767 |
| 120 (-12) |  |
62462 | Technic Pin Connector Round [Slotted] | 21 | 1764 |
| 121 (-2) |  |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 22 | 1741 |
| 122 (+44) |  |
32803 | Slope Curved 2 x 2 Inverted | 16 | 1716 |
| 123 (-3) |  |
30374 | Bar 4L (Lightsaber Blade / Wand) | 22 | 1711 |
| 124 (+1) |  |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 14 | 1710 |
| 125 (+6) |  |
60592 | Window 1 x 2 x 2 Flat Front | 18 | 1693 |
| 126 (-8) |  |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 9 | 1678 |
| 127 (-13) |  |
32316 | Technic Beam 1 x 5 Thick | 21 | 1672 |
| 128 (-2) |  |
14769 | 2×2 Tile, Round | 28 | 1664 |
| 129 (-12) |  |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 14 | 1649 |
| 130 (-8) |  |
3832 | 2×10 Plate | 16 | 1635 |
| 131 (-15) |  |
32140 | Technic Beam 2 x 4 L-Shape Thick | 18 | 1635 |
| 132 (+81) | |
23443 | Bar Holder with Hole and Bar Handle | 10 | 1621 |
| 133 — |  |
11090 | Bar Holder with Clip | 17 | 1621 |
| 134 (+43) |  |
29120 | Slope Curved 2 x 1 with Stud Notch Left | 28 | 1620 |
| 135 (-12) |  |
32000 | Technic Brick 1 x 2 [2 Holes] | 10 | 1611 |
| 136 (+4) |  |
60479 | 1×12 Plate | 15 | 1587 |
| 137 (+9) |  |
14719 | 2×2 Tile, Corner | 20 | 1583 |
| 138 (-6) |  |
32524 | Technic Beam 1 x 7 Thick | 20 | 1579 |
| 139 (-15) |  |
6536 | Technic Axle and Pin Connector Perpendicular | 14 | 1573 |
| 140 (+4) |  |
11212 | Plate 3 x 3 | 13 | 1572 |
| 141 — |  |
2456 | 2×6 Brick | 20 | 1557 |
| 142 (-12) |  |
4286 | Slope 33┬░ 3 x 1 | 27 | 1556 |
| 143 (-22) |  |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 28 | 1548 |
| 144 (+24) |  |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 20 | 1513 |
| 145 (+38) |  |
29119 | Slope Curved 2 x 1 with Stud Notch Right | 27 | 1510 |
| 146 (-17) |  |
4865 | Panel 1 x 2 x 1 [Square Corners] | 23 | 1503 |
| 147 (-12) |  |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 11 | 1488 |
| 148 (-14) |  |
18677 | Plate Special 1 x 2 with Pin Hole | 7 | 1470 |
| 149 (-1) |  |
41677 | Technic Beam 1 x 2 Thin | 10 | 1466 |
| 150 (+3) |  |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base – Hollow Clip [Complete Assembly] | 15 | 1432 |
| 151 (-14) |  |
4740 | 2×2 Dish | 31 | 1417 |
| 152 (+9) |  |
60601 | Glass for Window 1 x 2 x 2 Flat | 10 | 1416 |
| 153 (-15) |  |
32526 | Technic Beam 3 x 5 L-Shape Thick | 18 | 1405 |
| 154 (+61) | |
36841 | Bracket 1 x 1 – 1 x 1 | 18 | 1400 |
| 155 (-12) |  |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 1373 |
| 156 (-11) |  |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 10 | 1367 |
| 157 (-6) |  |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 11 | 1365 |
| 158 (-11) |  |
87552 | Panel 1 x 2 x 2 [Solid Studs] | 15 | 1364 |
| 159 (-9) |  |
53451 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 14 | 1355 |
| 160 (-11) |  |
85080 | Brick Round Corner 2 x 2 Macaroni with Stud Notch | 29 | 1350 |
| 161 (-1) |  |
60474 | Plate Round 4 x 4 with Pin Hole | 21 | 1325 |
| 162 (-10) |  |
32013 | Technic Axle and Pin Connector Angled #1 | 14 | 1318 |
| 163 — |  |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 9 | 1304 |
| 164 (-25) |  |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 18 | 1295 |
| 165 — |  |
3937 | Hinge Brick 1 x 2 Base | 16 | 1279 |
| 166 (+98) |  |
35787 | Tile 45┬░ Cut 2 x 2 | 21 | 1273 |
| 167 (-12) |  |
60481 | Slope 65┬░ 2 x 1 x 2 | 26 | 1270 |
| 168 (-11) |  |
3705 | Technic Axle 4 | 2 | 1267 |
| 169 (+3) |  |
2450 | Wedge Plate 3 x 3 Cut Corner | 18 | 1266 |
| 170 (+146) | |
37762 | Equipment Candle Stick | 10 | 1254 |
| 171 (-2) |  |
32073 | Technic Axle 5 | 2 | 1246 |
| 172 (+17) |  |
14716 | Brick 1 x 1 x 3 | 16 | 1228 |
| 173 (-14) |  |
15535 | Tile Round 2 x 2 with Hole | 13 | 1224 |
| 174 (-12) |  |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 21 | 1222 |
| 175 (+4) |  |
3035 | Plate 4 x 8 | 22 | 1221 |
| 176 (-5) |  |
3701 | Technic Brick 1 x 4 [3 Holes] | 13 | 1207 |
| 177 (-7) |  |
64644 | Equipment Telescope / Torch / Spyglass | 10 | 1197 |
| 178 (+43) |  |
37352 | Brick Curved 1 x 2 x 1 No Studs | 31 | 1192 |
| 179 (+2) | |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 12 | 1184 |
| 180 (-4) |  |
2445 | 2×12 Plate | 21 | 1162 |
| 181 (-14) |  |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 10 | 1161 |
| 182 (+24) |  |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 23 | 1158 |
| 183 (+1) |  |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex [Pyramid] | 19 | 1146 |
| 184 (+1) |  |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 1139 |
| 185 (-27) |  |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1132 |
| 186 (+16) |  |
11203 | Tile Special 2 x 2 Inverted | 17 | 1128 |
| 187 (-1) |  |
43722 | Wedge Plate 3 x 2 Right | 24 | 1128 |
| 188 (-10) |  |
63965 | Bar 6L with Stop Ring | 11 | 1116 |
| 189 (-15) |  |
40490 | Technic Beam 1 x 9 Thick | 14 | 1107 |
| 190 (-10) |  |
3065 | Brick 1 x 2 without Bottom Tube | 13 | 1099 |
| 191 (-3) |  |
43723 | Wedge Plate 3 x 2 Left | 25 | 1098 |
| 192 (-2) |  |
24309 | Slope Curved 3 x 2 No Studs | 13 | 1093 |
| 193 — |  |
22385 | Tile Special 2 x 3 Pentagonal | 31 | 1089 |
| 194 (+15) |  |
4282 | 2×16 Plate | 16 | 1062 |
| 195 (-20) |  |
3958 | Plate 6 x 6 | 30 | 1058 |
| 196 (-4) |  |
30357 | Plate Round Corner 3 x 3 | 29 | 1054 |
| 197 (-10) |  |
49668 | Plate Special 1 x 1 with Tooth | 17 | 1035 |
| 198 (-7) |  |
87083 | Technic Axle 4 with Stop | 1 | 1032 |
| 199 (-26) |  |
4599b | Tap 1 x 1 with Hole in Spout | 8 | 1022 |
| 200 (+113) |  |
14696 | Technic Link, Reinforced, with Beveled Edge | 3 | 1010 |
| 201 (-4) |  |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 1007 |
| 202 (-7) |  |
32278 | Technic Beam 1 x 15 Thick | 18 | 1006 |
| 203 — |  |
6632 | Technic Beam 1 x 3 Thin | 10 | 998 |
| 204 (-3) |  |
41770 | Wedge Plate 4 x 2 Left | 25 | 989 |
| 205 (+12) |  |
3037 | Slope 45┬░ 2 x 4 | 20 | 977 |
| 206 (-12) |  |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 18 | 976 |
| 207 (-11) |  |
41769 | Wedge Plate 4 x 2 Right | 25 | 964 |
| 208 (+148) |  |
69729 | Tile 2 x 6 | 14 | 949 |
| 209 (-11) |  |
2432 | Tile Special 1 x 2 with Handle | 14 | 942 |
| 210 (-11) |  |
32525 | Technic Beam 1 x 11 Thick | 17 | 938 |
| 211 (+5) |  |
3659 | Brick Arch 1 x 4 | 17 | 931 |
| 212 (+69) |  |
41682 | Bracket 2 x 2 with 1 x 2 Vertical Studs | 16 | 929 |
| 213 (-6) |  |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 16 | 925 |
| 214 (+12) |  |
93274 | Bracket 1 x 2 – 2 x 4 | 11 | 925 |
| 215 (+27) |  |
27507 | Tile 4 x 4 Curved, Macaroni | 32 | 923 |
| 216 (-11) |  |
24316 | Technic Axle 3 with Stop | 1 | 913 |
| 217 (+15) |  |
3036 | Plate 6 x 8 | 22 | 906 |
| 218 (+34) |  |
24299 | Wedge Plate 2 x 2 Left | 19 | 885 |
| 219 (-8) |  |
15070 | Plate Special 1 x 1 with Vertical Tooth | 15 | 881 |
| 220 (-8) |  |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 877 |
| 221 (-13) |  |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 867 |
| 222 (+8) |  |
87620 | Wedge 2 x 2 Facet | 16 | 863 |
| 223 (-41) |  |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 2 | 860 |
| 224 (+16) |  |
93606 | Slope Curved 4 x 2 No Studs | 19 | 858 |
| 225 (-6) |  |
4460 | Slope 75┬░ 2 x 1 x 3 with Open Stud | 18 | 856 |
| 226 (+21) |  |
24307 | Wedge Plate 2 x 2 Right | 19 | 851 |
| 227 (+2) |  |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Towball | 1 | 850 |
| 228 (-18) |  |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 11 | 842 |
| 229 (-9) |  |
30565 | Plate Round Corner 4 x 4 | 29 | 842 |
| 230 (-2) |  |
18653 | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 23 | 839 |
| 231 (+5) |  |
44865 | Brick Special 1 x 2 with Pin | 7 | 834 |
| 232 (+39) |  |
3007 | 2×8 Brick | 11 | 830 |
| 233 (-11) |  |
3176 | Plate Special 3 x 2 with Hole | 17 | 827 |
| 234 (-34) |  |
4081 | Plate Special 1 x 1 with Clip Light [Thin Ring] | 13 | 823 |
| 235 — | |
2423 | Plant, Leaves 4 x 3 | 11 | 814 |
| 236 (+2) |  |
22961 | Technic Pin Connector Hub with 1 Axle | 10 | 813 |
| 237 (+26) |  |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 811 |
| 238 (-34) |  |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 7 | 808 |
| 239 (-16) |  |
3298 | Slope 33┬░ 3 x 2 | 19 | 804 |
| 240 (-15) |  |
32556 | Technic Pin Long without Friction Ridges | 1 | 802 |
| 241 (-7) |  |
54657 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 6 | 774 |
| 242 (+45) |  |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 8 | 770 |
| 243 (-12) |  |
3747b | Slope Inverted 33┬░ 3 x 2 [No Connections between Studs] | 15 | 766 |
| 244 (-1) |  |
33183 | Plant, Carrot Top | 5 | 762 |
| 245 (-27) |  |
51739 | Wedge Plate 2 x 4 | 20 | 761 |
| 246 (-19) |  |
298c02 | Lever Small Base with Black Lever | 6 | 758 |
| 247 (+33) |  |
26287 | Technic Driving Ring Connector Smooth [4 rounded side walls] | 7 | 757 |
| 248 (+251) |  |
73825 | Bracket 1 x 1 – 1 x 2 Inverted | 11 | 756 |
| 249 (-8) |  |
60596 | Door Frame 1 x 4 x 6 Type 2 | 20 | 753 |
| 250 (-17) |  |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 748 |
| 251 (+7) |  |
3957 | Antenna 1 x 4 with Rounded Top | 12 | 748 |
| 252 (+33) |  |
2465 | 1×16 Brick | 14 | 738 |
| 253 (-14) |  |
32039 | Technic Axle Connector with Axle Hole | 8 | 733 |
| 254 (+2) |  |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 716 |
| 255 (-10) |  |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 712 |
| 256 (+112) |  |
35464 | Slope Double 45┬░ 1 x 1 | 8 | 706 |
| 257 (-20) |  |
2453 | Brick 1 x 1 x 5 with Blocked Open or Hollow Stud | 21 | 704 |
| 258 (+45) |  |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 11 | 699 |
| 259 (+40) |  |
13547 | Slope Curved 4 x 1 Inverted | 20 | 694 |
| 260 (+5) |  |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 16 | 688 |
| 261 (-12) |  |
92947 | Brick Round 2 x 2 [Grill] | 10 | 684 |
| 262 (+7) |  |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 6 | 683 |
| 263 (-17) |  |
32002 | Technic Pin 3/4 | 2 | 674 |
| 264 (-20) |  |
88646 | Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 6 | 667 |
| 265 (+13) |  |
6112 | 1×12 Brick | 13 | 663 |
| 266 (+17) |  |
3033 | Plate 6 x 10 | 21 | 660 |
| 267 (-7) |  |
41239 | Technic Beam 1 x 13 Thick | 15 | 659 |
| 268 (-11) |  |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 14 | 653 |
| 269 (+29) |  |
6111 | 1×10 Brick | 12 | 652 |
| 270 (-16) |  |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 9 | 651 |
| 271 (+13) |  |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 18 | 644 |
| 272 (-22) |  |
87544 | Panel 1 x 2 x 3 – Solid Studs | 13 | 644 |
| 273 (+3) |  |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 6 | 642 |
| 274 (-12) |  |
60484 | Technic Beam 3 x 3 T-Shape Thick | 8 | 639 |
| 275 (-51) |  |
6231 | Panel 1 x 1 x 1 Corner | 15 | 638 |
| 276 (-62) |  |
15392 | Launcher Trigger, Weapon Gun Trigger | 2 | 635 |
| 277 (-26) |  |
4490 | Brick Arch 1 x 3 | 11 | 635 |
| 278 (-23) |  |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 25 | 634 |
| 279 (+22) |  |
18980 | Plate Round Corner 2 x 6 Double | 25 | 629 |
| 280 (-32) |  |
60477 | Slope 18┬░ 4 x 1 | 14 | 629 |
| 281 (+43) | |
32606 | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin | 4 | 615 |
| 282 (-21) |  |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 7 | 612 |
| 283 (-13) |  |
3030 | Plate 4 x 10 | 16 | 612 |
| 284 (-17) |  |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 11 | 611 |
| 285 (-26) |  |
30503 | Wedge Plate 4 x 4 Cut Corner | 12 | 606 |
| 286 (-18) |  |
44294 | Technic Axle 7 | 2 | 605 |
| 287 (+6) |  |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 9 | 605 |
| 288 (-22) |  |
3706 | Technic Axle 6 | 2 | 603 |
| 289 (+15) |  |
4287 | Slope Inverted 34┬░ 3 x 1 without Internal Stopper | 14 | 602 |
| 290 (+15) |  |
88292 | Brick Arch 1 x 3 x 2 | 14 | 601 |
| 291 (-12) |  |
11215 | Bracket 5 x 2 x 1 1/3 | 10 | 598 |
| 292 (-6) |  |
73562 | Bracket 3 x 2 x 1 1/3 with Pin Bottom | 8 | 598 |
| 293 (+1) |  |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 14 | 597 |
| 294 (+17) |  |
3029 | Plate 4 x 12 | 15 | 593 |
| 295 (+1) |  |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 7 | 592 |
| 296 (-14) |  |
87747 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 12 | 588 |
| 297 (-8) |  |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 17 | 587 |
| 298 (+4) |  |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 10 | 587 |
| 299 (+37) |  |
36752a | Equipment Wand [Individual] | 8 | 585 |
| 300 (+23) | |
2417 | Plant, Leaves 6 x 5 | 15 | 582 |
| 301 (-13) |  |
4624 | Wheel 8 x 6 with Slot | 4 | 579 |
| 302 (+16) |  |
11253 | Sports Roller Skate | 8 | 579 |
| 303 (+48) |  |
13548 | Wedge Sloped 45┬░ 2 x 2 Corner | 13 | 574 |
| 304 (+5) |  |
96874 | Brick and Axle Separator v2.0 | 2 | 566 |
| 305 (+1) |  |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 12 | 565 |
| 306 (-9) |  |
3709 | Technic Plate 2 x 4 [3 Holes] | 7 | 565 |
| 307 (+15) |  |
3045 | Slope 45┬░ 2 x 2 Double Convex | 18 | 559 |
| 308 (+661) | |
78258 | Bar 2L with Stop in Center | 4 | 557 |
| 309 (-9) |  |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 7 | 555 |
| 310 (-35) |  |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 25 | 554 |
| 311 (-1) |  |
32449 | Technic Beam 1 x 4 Thin | 8 | 553 |
| 312 (-40) |  |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 20 | 552 |
| 313 (-60) |  |
15379 | Technic Link Tread with Beveled Edge | 2 | 551 |
| 314 (+17) |  |
88930 | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 17 | 551 |
| 315 (+6) |  |
4079b | Seat / Chair 2 x 2 with Center Sprue Mark | 13 | 550 |
| 316 (-39) |  |
54383 | Wedge Plate 6 x 3 Right | 15 | 546 |
| 317 (+15) |  |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 12 | 546 |
| 318 (-23) |  |
6589 | Technic Gear 12 Tooth Bevel | 1 | 545 |
| 319 (-7) |  |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 12 | 545 |
| 320 (+5) |  |
91988 | 2×14 Plate | 13 | 544 |
| 321 (+58) |  |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 7 | 540 |
| 322 (-15) |  |
92950 | Brick Arch 1 x 6 Raised Arch | 13 | 538 |
| 323 (-3) |  |
22888 | Plate Round Corner 4 x 8 Double | 25 | 536 |
| 324 (+203) |  |
73230 | Technic Brick 1 x 1 with Axle Hole | 7 | 532 |
| 325 (-51) |  |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 531 |
| 326 (-53) |  |
6179 | Plate Special 4 x 4 with Studs on One Edge [Plain] | 16 | 529 |
| 327 (-37) |  |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 528 |
| 328 (-36) |  |
15462 | Technic Axle 5 with Stop | 1 | 525 |
| 329 (-10) |  |
3684c | Slope 75┬░ 2 x 2 x 3 [Hollow Studs] | 16 | 518 |
| 330 (+7) |  |
60593 | Window 1 x 2 x 3 Flat Front | 13 | 506 |
| 331 (+11) |  |
6003 | Plate Round Corner 6 x 6 | 21 | 503 |
| 332 (-41) |  |
54384 | Wedge Plate 6 x 3 Left | 14 | 501 |
| 333 (-7) |  |
4510 | Plate Special 1 x 8 with Door Rail | 11 | 499 |
| 334 (-6) |  |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 12 | 495 |
| 335 (+49) |  |
37775 | Wave / Flame Small with Pin | 3 | 492 |
| 336 (+2) |  |
59349 | Panel 1 x 6 x 5 | 26 | 491 |
| 337 (-29) |  |
3702 | Technic Brick 1 x 8 [7 Holes] | 7 | 489 |
| 338 (-9) |  |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 4 | 488 |
| 339 (-22) |  |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 487 |
| 340 (+220) |  |
70681 | Brick Curved, 3 x 1 with 1/3 Inverted Cutout | 16 | 477 |
| 341 (-26) |  |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 10 | 464 |
| 342 (+6) |  |
43888 | Support 1 x 1 x 6 Solid Pillar | 11 | 462 |
| 343 (-9) |  |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 8 | 447 |
| 344 (+5) |  |
43898 | Dish 3 x 3 Inverted [Radar] | 22 | 445 |
| 345 (+1) |  |
43857 | Technic Beam 1 x 2 Thick | 9 | 442 |
| 346 (-11) |  |
64647 | Headwear Accessory Plume / Feather / Flame Triple Point | 12 | 440 |
| 347 (-17) |  |
18649 | Plate Special 1 x 2 with Handles on Ends | 7 | 439 |
| 348 (+2) |  |
2476 | Plate Special 2 x 2 with Pin on Bottom | 4 | 437 |
| 349 (-16) |  |
3703 | Technic Brick 1 x 16 [15 Holes] | 9 | 435 |
| 350 (+258) |  |
65509 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 10 | 434 |
| 351 (-11) |  |
3829c01 | Steering Stand 1 x 2 with Black Steering Wheel | 6 | 432 |
| 352 (+43) |  |
24855 | Plant, Flower Stem with Bottom Pin | 3 | 431 |
| 353 (+32) |  |
11609 | Star with Stud Holder | 4 | 430 |
| 354 (-27) |  |
6232 | Brick Special 2 x 2 with Pin and No Axle Hole | 7 | 427 |
| 355 (-12) |  |
4216 | Brick Special 1 x 2 with Groove | 11 | 427 |
| 356 (-17) |  |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 4 | 421 |
| 357 (-2) |  |
98100 | Brick Round 2 x 2 Truncated Cone | 10 | 421 |
| 358 (+41) |  |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 21 | 420 |
| 359 (+8) |  |
11213 | Plate Round 6 x 6 with Hole | 16 | 419 |
| 360 (+43) |  |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 5 | 417 |
| 361 (+59) |  |
27261 | Plate Special 2 x 3 with Rocks | 9 | 412 |
| 362 (+27) |  |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 12 | 412 |
| 363 (+19) |  |
17485 | Brick Round 2 x 2 with Pin Holes | 10 | 411 |
| 364 (-6) |  |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 8 | 410 |
| 365 (-3) |  |
41539 | Plate 8 x 8 | 24 | 409 |
| 366 (-12) |  |
3028 | Plate 6 x 12 | 19 | 409 |
| 367 (-4) |  |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 14 | 402 |
| 368 (-7) |  |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 12 | 400 |
| 369 (+31) |  |
92438 | Plate 8 x 16 | 26 | 396 |
| 370 (+18) |  |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 12 | 395 |
| 371 (-11) |  |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 9 | 394 |
| 372 — |  |
87081 | Brick Round 4 x 4 [Centre Hole] | 15 | 394 |
| 373 (+18) |  |
3633 | Fence 1 x 4 x 1 | 7 | 392 |
| 374 (-15) |  |
3899 | Equipment Cup / Mug [Plain] | 7 | 390 |
| 375 (-18) |  |
30236 | Brick Special 1 x 2 with Handle | 6 | 389 |
| 376 (-7) |  |
2460 | Tile Special 2 x 2 with Top Pin | 6 | 388 |
| 377 (+28) |  |
32474 | Technic Ball Joint | 17 | 388 |
| 378 (+35) |  |
23950 | Panel 1 x 3 x 1 | 12 | 387 |
| 379 (+35) |  |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 6 | 385 |
| 380 (-6) |  |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 7 | 384 |
| 381 (+52) |  |
47456 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 15 | 378 |
| 382 (-37) |  |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 378 |
| 383 (+96) | |
37695 | Plant, Stem with 3 Leaves and Bottom Pin | 3 | 378 |
| 384 (-31) |  |
3895 | Technic Brick 1 x 12 [11 Holes] | 9 | 375 |
| 385 (-20) |  |
32291 | Technic Axle and Pin Connector Perpendicular Double | 6 | 375 |
| 386 (+114) |  |
35044 | Plate Special 4 x 4 with Curved Cutout | 18 | 375 |
| 387 (+28) |  |
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | 18 | 373 |
| 388 (-24) |  |
6587 | Technic Axle 3 with Stud | 4 | 371 |
| 389 (-6) |  |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 21 | 370 |
| 390 (-4) |  |
28974 | Minifig Neckwear Bracket [One Stud] – Reinforced | 7 | 370 |
| 391 (+3) |  |
2653 | Brick Special 1 x 4 with Groove | 7 | 369 |
| 392 (-11) |  |
6126b | Wave / Flame Rounded with Base Rim | 6 | 369 |
| 393 (-52) |  |
50340 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 7 | 368 |
| 394 (+177) |  |
65578 | Bar, Angled with Stud on End | 6 | 368 |
| 395 (+855) |  |
79389 | Bracket 1 x 1 – 1 x 2 | 3 | 364 |
| 396 (+15) |  |
32063 | Technic Beam 1 x 6 Thin | 7 | 363 |
| 397 (-7) |  |
42610 | Wheel 11 x 8 with Center Groove | 2 | 362 |
| 398 (-46) |  |
2921 | Brick Special 1 x 1 with Handle | 12 | 360 |
| 399 (+17) |  |
22890 | Plate Special 1 x 2 with End Towball | 1 | 360 |
| 400 (+74) |  |
25893 | Plate Round 1 x 1 with Open Stud and Bar on Underside | 6 | 360 |
| 401 (+22) |  |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 3 | 358 |
| 402 (+593) |  |
78329 | Plate 1 x 5 | 7 | 356 |
| 403 (-7) |  |
2736 | Technic Axle Towball | 2 | 354 |
| 404 (+5) |  |
27940 | Technic Pin Connector Hub with 2 Axles | 4 | 354 |
| 405 (+24) |  |
89522 | Creature Body Part, Horn (Unicorn) | 13 | 353 |
| 406 (-8) |  |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 5 | 353 |
| 407 (-3) |  |
30363 | Slope 18┬░ 4 x 2 | 12 | 351 |
| 408 (-42) |  |
15458 | Technic Panel 3 x 11 x 1 | 12 | 351 |
| 409 (+8) |  |
4600 | Plate Special 2 x 2 with Wheel Holders | 2 | 349 |
| 410 (-37) |  |
59426 | Technic Axle 5.5 with Stop [Rounded Short End] | 1 | 349 |
| 411 (-9) |  |
64179 | Technic Beam Frame 5 x 7 Open Center Thick | 7 | 349 |
| 412 (+15) |  |
11610 | Food Ice Cream Cone | 7 | 346 |
| 413 (+9586) |  |
89678 | Technic Pin 1/2 with Friction | 2 | 345 |
| 414 (-100) |  |
3680 | Turntable 2 x 2 Plate, Base | 5 | 345 |
| 415 (-14) |  |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 344 |
| 416 (+6) |  |
3679 | Turntable 2 x 2 Plate – Top | 1 | 343 |
| 417 (+39) |  |
34816 | Brick Special 1 x 2 with Vertical Closed Handle on Edge | 8 | 342 |
| 418 (-38) |  |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 12 | 340 |
| 419 (-49) |  |
6180 | Plate Special 4 x 6 with Studs on 3 Edges | 11 | 338 |
| 420 (+28) |  |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 15 | 338 |
| 421 (+132) |  |
67329 | Brick Special 1 x 2 x 1 2/3 with 8 Studs on 3 Sides | 8 | 337 |
| 422 (+51) |  |
39739 | Tile 1 x 1 Heart | 9 | 334 |
| 423 (-52) |  |
13731 | Brick Curved 10 x 1 [Symmetric Inside Ridges] | 15 | 333 |
| 424 (+2) |  |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 9 | 333 |
| 425 (+2121) |  |
86996 | Plate 1 x 1 x 2/3 with Hole in Stud | 9 | 333 |
| 426 (-16) |  |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 331 |
| 427 (-35) |  |
57360 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 4 | 330 |
| 428 (-10) |  |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 14 | 330 |
| 429 (-82) |  |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 4 | 326 |
| 430 (-54) |  |
69819 | Technic Axle and Pin Connector Perpendicular Double Split | 7 | 324 |
| 431 (+49) |  |
30166 | Minifig Shield Rectangular with 4 Studs | 5 | 323 |
| 432 (+21) |  |
33320 | Animal, Frog | 11 | 323 |
| 433 (+3) |  |
3942c | Cone 2 x 2 x 2 with Completely Open Stud | 17 | 319 |
| 434 (-26) |  |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 5 | 318 |
| 435 (+34) |  |
3297 | Slope 33┬░ 3 x 4 | 12 | 316 |
| 436 (+6) |  |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole, No Arm Holes | 8 | 315 |
| 437 (-31) |  |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 9 | 315 |
| 438 (+76) |  |
66792 | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs | 14 | 314 |
| 439 (-42) |  |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 6 | 314 |
| 440 (-96) |  |
15403 | Launcher, Plate Special 1 x 2 with Mini Blaster | 3 | 313 |
| 441 (-34) |  |
87609 | Plate Special 2 x 6 x 2/3. With Four Studs on Side, One Support Wall on Bottom | 12 | 311 |
| 442 (-10) |  |
32056 | Technic Beam 3 x 3 L-Shape Thin | 6 | 308 |
| 443 (-56) |  |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 6 | 308 |
| 444 (+27) |  |
30165 | Brick Curved 2 x 2 with Two Top Studs | 18 | 308 |
| 445 (-4) |  |
3707 | Technic Axle 8 | 2 | 307 |
| 446 (+13) |  |
3830 | Hinge Brick 1 x 4 [Upper] | 12 | 305 |
| 447 (+14) |  |
3831 | Hinge Brick 1 x 4 [Lower] | 12 | 305 |
| 448 (-70) |  |
15303 | Projectile, Spring Shooter Ammunition 8L | 8 | 305 |
| 449 (-30) |  |
60476 | Brick Special 1 x 1 with Clip Horizontal | 5 | 304 |
| 450 (-29) |  |
94925 | Technic Gear 16 Tooth with Round Holes [Old Style] | 1 | 304 |
| 451 (-1) |  |
87414 | Tyre 15 x 6 Offset Tread Small | 1 | 302 |
| 452 (+40) |  |
22886 | Brick 1 x 2 x 3 with Bottom Stud Holder | 9 | 302 |
| 453 (-9) |  |
57895 | Glass for Window 1 x 4 x 6 | 8 | 300 |
| 454 (-61) |  |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 8 | 300 |
| 455 (-9) |  |
6106 | Wedge Plate 6 x 6 Cut Corner | 13 | 299 |
| 456 (-26) |  |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Towball | 1 | 299 |
| 457 (+272) |  |
24122 | Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | 4 | 299 |
| 458 (+159) |  |
35459 | Tile Special 1 x 3 Inverted with Center Hole | 12 | 298 |
| 459 (-47) |  |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 10 | 295 |
| 460 (-85) |  |
2419 | Wedge Plate 3 x 6 Cut Corners | 14 | 295 |
| 461 (-36) |  |
55013 | Technic Axle 8 with Stop | 1 | 294 |
| 462 (+24) |  |
11947 | Technic Panel Fairing #22 Very Small Smooth, Side A | 20 | 292 |
| 463 (+7) |  |
33078 | Food Hot Dog / Sausage | 8 | 290 |
| 464 (+18) |  |
11946 | Technic Panel Fairing #21 Very Small Smooth, Side B | 19 | 289 |
| 465 (-26) |  |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 288 |
| 466 (-6) |  |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 9 | 287 |
| 467 (-90) |  |
60849 | Equipment Hose Nozzle / Gun with Side String Hole Simplified | 5 | 285 |
| 468 (-33) |  |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 10 | 284 |
| 469 (-38) |  |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 6 | 279 |
| 470 (-30) |  |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 7 | 277 |
| 471 (-16) |  |
90195 | Window 1 x 2 x 2 Castle | 9 | 276 |
| 472 (+32) |  |
10202 | Tile 6 x 6 with Bottom Tubes | 10 | 275 |
| 473 (-35) |  |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 273 |
| 474 (-50) |  |
22667 | Plant, Cherries | 3 | 273 |
| 475 (+16) |  |
15456 | Plate Special 2 x 2 with Towball and Hole | 2 | 271 |
| 476 (+8) |  |
14718 | Panel 1 x 4 x 2 with Side Supports – Hollow Studs | 9 | 271 |
| 477 (-23) |  |
2723 | Technic Disk 3 x 3 | 6 | 271 |
| 478 (-21) |  |
2496 | Wheel Skateboard / Trolley | 3 | 270 |
| 479 (+19) |  |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 270 |
| 480 (-31) |  |
50745 | Wheel Arch, Mudguard 4 x 2 1/2 x 2 | 12 | 270 |
| 481 (+53) |  |
38320 | Bars For Window 1 x 2 x 2 | 3 | 268 |
| 482 (-37) |  |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 11 | 268 |
| 483 (+36) |  |
47458 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 11 | 265 |
| 484 (-7) |  |
32001 | Technic Plate 2 x 6 [5 Holes] | 8 | 265 |
| 485 (-10) |  |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 264 |
| 486 (-22) |  |
30099 | Brick Arch 1 x 5 x 4 Inverted | 16 | 263 |
| 487 (+8) |  |
3038 | Slope 45┬░ 2 x 3 | 5 | 260 |
| 488 (-20) |  |
99008 | Technic Axle 4 with Centre Stop | 1 | 259 |
| 489 (-26) |  |
4488 | Plate Special 2 x 2 with Wheel Holder | 3 | 259 |
| 490 (-62) |  |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 259 |
| 491 (-25) |  |
2343 | Equipment Goblet / Glass | 5 | 259 |
| 492 (-11) |  |
61485 | Turntable 4 x 4 Square Base, Locking | 4 | 259 |
| 493 (-17) |  |
85943 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 2 | 259 |
| 494 (+17) |  |
30602 | Slope Curved 2 x 2 with Lip, No Studs | 19 | 258 |
| 495 (+221) |  |
66956 | Slope Curved 2 x 2 with Stud Notches | 14 | 257 |
| 496 (-62) |  |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 256 |
| 497 (+15) |  |
6215 | Brick Curved 2 x 3 with Curved Top | 14 | 256 |
| 498 (+72) |  |
39789 | Brick Special 2 x 4 with 3 Axle Holes | 9 | 255 |
| 499 (+9500) |  |
79756 | Brick Curved 1 x 4 x 2/3 Double Curved Top, No Studs | 5 | 253 |
| 500 (+51) |  |
64225 | Wedge Curved 4 x 3 No Studs [Plain] | 18 | 252 |
| 501 (-16) |  |
60616 | Door 1 x 4 x 6 Smooth with Square Handle Plinth | 13 | 251 |
| 502 (-50) |  |
11208 | Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes | 6 | 251 |
| 503 (-56) |  |
60485 | Technic Axle 9 | 2 | 251 |
| 504 (+489) |  |
68013 | Brick Round, Half 1 x 2 | 7 | 250 |
| 505 (-68) |  |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 248 |
| 506 (+7) |  |
13564 | Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue – Long | 6 | 248 |
| 507 (-5) |  |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 9 | 245 |
| 508 (-1) |  |
3708 | Technic Axle 12 | 2 | 245 |
| 509 (+6) |  |
3738 | Technic Plate 2 x 8 [7 Holes] | 11 | 244 |
| 510 (-9) |  |
22484 | Bar 2L with Towball | 6 | 242 |
| 511 (+26) |  |
2639 | 4×4 Plate, Corner | 5 | 241 |
| 512 (+389) |  |
78256 | Plate Special 1 x 2 with Clip Vertical on End | 5 | 241 |
| 513 (-26) |  |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 5 | 241 |
| 514 (-71) |  |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 15 | 239 |
| 515 (+52) |  |
50254 | Train Wheel Small, hole notched for wheels holder pin | 2 | 237 |
| 516 (+514) |  |
78666 | Brick Curved 2 x 1 with Inverted Cutout | 11 | 237 |
| 517 (-21) |  |
30031 | Handlebars | 7 | 235 |
| 518 (+17) |  |
22889 | Slope Inverted 45┬░ 6 x 2 Double with 2 x 4 Cutout | 13 | 233 |
| 519 (-68) |  |
30162 | Equipment Binoculars | 6 | 232 |
| 520 (-27) |  |
33243 | Brick Curved 1 x 3 x 2 | 16 | 232 |
| 521 (-49) |  |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 3 | 231 |
| 522 (-28) |  |
6191 | Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top with Raised Inside Support | 19 | 231 |
| 523 (-13) |  |
40345 | Technic Brick 6 x 8 with Open Center 4 x 6 | 3 | 228 |
| 524 (+24) |  |
90258 | Brick Special 2 x 2 with Grooves and Axle Hole | 2 | 226 |
| 525 (-42) |  |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 9 | 226 |
| 526 (+4) |  |
6060 | Brick Arch 1 x 6 x 3 1/3 Curved Top | 15 | 226 |
| 527 (-65) |  |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 225 |
| 528 (-7) |  |
18853 | Plant, Flower with Pointed Petals and Pin | 3 | 225 |
| 529 (+23) |  |
3006 | 2×10 Brick | 9 | 225 |
| 530 (-33) |  |
47397 | Wedge Plate 12 x 3 Left | 13 | 224 |
| 531 (-64) |  |
64782 | Technic Panel 5 x 11 x 1 | 13 | 223 |
| 532 (-4) |  |
85975 | Cone 1.17 x 1.17 x 2/3 (Fez) | 9 | 222 |
| 533 (-68) |  |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 221 |
| 534 (-56) |  |
47398 | Wedge Plate 12 x 3 Right | 13 | 220 |
| 535 (+1) |  |
6182 | Brick Arch 1 x 4 x 2 | 9 | 219 |
| 536 (+232) |  |
68568 | Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 16 | 217 |
| 537 (-20) |  |
46212 | Brick 1 x 2 x 5 without Side Supports | 8 | 216 |
| 538 (-32) |  |
11209 | Tyre 21 x 9.9 | 1 | 215 |
| 539 (-13) |  |
92690 | Bar 1L with Top Stud and Two Side Studs | 5 | 215 |
| 540 (+4) |  |
48171 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 3 | 214 |
| 541 (-18) |  |
2599 | Minifig Footwear Flipper [Thick] | 7 | 214 |
| 542 (-1) |  |
30145 | Brick 2 x 2 x 3 | 7 | 214 |
| 543 (+26) |  |
92410 | Cupboard 2 x 3 x 2 with Solid Studs | 12 | 212 |
| 544 (+20) |  |
95344 | Bucket 1 x 1 x 1 Handle | 5 | 212 |
| 545 (-20) |  |
53923 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 4 | 210 |
| 546 (-28) |  |
45590 | Technic Axle Connector Double Flexible [Rubber] | 1 | 209 |
| 547 (+89) |  |
19119 | Plant, Flower Stem with Bar and 6 Stems | 5 | 209 |
| 548 (-3) |  |
14720 | Technic Beam 3 x 5 Thick [90┬░ Offset Centre Beam Holes] | 4 | 209 |
| 549 (-2) |  |
6157 | Plate Special 2 x 2 with Wheels Holder Wide [Reinforced Underside Type 2] | 3 | 207 |
| 550 (+32) |  |
39793 | Technic Connector Beam 3 x 3 | 6 | 206 |
| 551 (+46) |  |
10884 | Plant, Leaves 6 x 5 Swordleaf with Clip (thick open O clip) | 6 | 206 |
| 552 (-63) |  |
98282 | Wheel Arch, Mudguard 4 x 2 1/2 x 1 | 11 | 204 |
| 553 (-44) |  |
16577 | Brick Arch 1 x 8 x 2 Raised | 13 | 203 |
| 554 — |  |
28326 | Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 11 | 202 |
| 555 (-50) |  |
40344 | Technic Brick 4 x 6 Open Center | 3 | 202 |
| 556 (-68) |  |
50304 | Wedge Plate 8 x 3 Right | 12 | 201 |
| 557 (-17) |  |
3960 | Dish 4 x 4 Inverted with Open Stud [Radar] | 21 | 201 |
| 558 (-26) |  |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 200 |
| 559 (-17) |  |
2462 | Wedge 3 x 3 Facet | 4 | 200 |
| 560 (-10) |  |
98834 | Spoiler 2 x 4 with Handle [Plain] | 11 | 199 |
| 561 (-39) |  |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 199 |
| 562 (-7) |  |
42022 | Brick Curved 6 x 1 | 15 | 197 |
| 563 (-105) |  |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 196 |
| 564 (-31) |  |
61482 | Equipment Handcuffs | 6 | 194 |
| 565 (-75) |  |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 2 | 194 |
| 566 (+10) |  |
28870 | Ornament with Bar | 9 | 193 |
| 567 (-11) |  |
4345 | Box 2 x 2 x 2 [Solid Studs] | 5 | 193 |
| 568 (-25) |  |
30157 | Plate Special 2 x 4 with Pins | 4 | 192 |
| 569 (-61) |  |
15400 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 1 | 192 |
| 570 (+57) |  |
91501 | Panel 2 x 2 x 1 Corner | 6 | 191 |
| 571 (+13) |  |
24375 | Rubber Technic Tread Attachment | 2 | 189 |
| 572 (-11) |  |
4346 | Box 2 x 2 x 2 Door with Slot | 6 | 188 |
| 573 (-34) |  |
42023 | Brick Curved 6 x 1 Inverted | 11 | 187 |
| 574 — |  |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 187 |
| 575 (+14) |  |
57909 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 3 | 187 |
| 576 (+12) |  |
91405 | Plate 16 x 16 | 17 | 186 |
| 577 (-53) |  |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 12 | 185 |
| 578 (-19) |  |
26599 | Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 2 | 185 |
| 579 — |  |
4590 | Plate Special 1 x 4 Offset | 6 | 185 |
| 580 (-51) |  |
92907 | Technic Axle and Pin Connector Perpendicular Split | 5 | 184 |
| 581 (+4) |  |
21445 | Plate Special 1 x 2 with Wheel Holder, Single Slit | 2 | 183 |
| 582 (+24) |  |
52031 | Slope Curved 4 x 6 x 2/3 Triple Curved with 4 Studs | 22 | 183 |
| 583 (-45) |  |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 183 |
| 584 (-81) |  |
50305 | Wedge Plate 8 x 3 Left | 11 | 182 |
| 585 (+71) |  |
42918 | Slope Curved 8 x 2 No Studs | 13 | 180 |
| 586 (-28) |  |
93160 | Animal Body Part, Dog Bone [Short] | 4 | 180 |
| 587 (-25) |  |
92338 | Chain 5 links | 6 | 178 |
| 588 (+85) |  |
53119 | Plate Round 1 x 1 Swirled Top / Poo | 2 | 178 |
| 589 (-11) |  |
3737 | Technic Axle 10 | 2 | 177 |
| 590 (-18) |  |
15209 | Tile Special 1 x 2 with Two Vertical Teeth | 6 | 176 |
| 591 (+22) |  |
6254 | Food Ice Cream Scoops | 7 | 176 |
| 592 (-35) |  |
18977 | Tyre 24 x 12 Low Profile | 1 | 174 |
| 593 (-77) |  |
30044 | Window 1 x 2 x 2 2/3 with Rounded Top | 8 | 173 |
| 594 (-48) |  |
98585 | Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 7 | 172 |
| 595 (-14) |  |
90540 | Bar 3L, with Handle, Stop Ring and Side Stops (Minifig Ski Pole) | 5 | 172 |
| 596 (-47) |  |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 8 | 171 |
| 597 (-14) |  |
25375 | Tassel with 1 x 1 Round Stud | 2 | 170 |
| 598 (+4) |  |
62113 | Bar 1 x 4 x 3 [End Tabs] | 5 | 170 |
| 599 (-1) |  |
76766 | Bracket 5 x 2 x 2 1/3 | 6 | 170 |
| 600 (-9) |  |
19220 | Equipment Radio [Extended Handle, Expanded Speaker Grille] | 3 | 169 |
| 601 (+529) |  |
73109 | Technic Brick Special 1 x 2 with Pin Hole and 1 x 2 Plate | 2 | 168 |
| 602 (-71) |  |
40379 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 16 | 168 |
| 603 (+32) |  |
30504 | Wedge Plate 8 x 8 Cut Corner | 12 | 168 |
| 604 (-11) |  |
3743 | Technic Gear Rack 1 x 4 | 3 | 166 |
| 605 (+172) |  |
x346 | Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 14 | 165 |
| 606 (+47) |  |
16770 | Creature Body Part, Barb Large (Claw, Talon) with Clip | 7 | 165 |
| 607 (+9) |  |
19807a | Weapon Throwing Star / Shuriken with Smooth Grips | 2 | 165 |
| 608 (-5) |  |
4006 | Tool Screwdriver and Spanner / Wrench | 3 | 164 |
| 609 (-46) |  |
30562 | Panel 4 x 4 x 6 Quarter Cylinder | 15 | 164 |
| 610 (+138) |  |
49311 | Brick 1 x 4 x 3 | 12 | 164 |
| 611 (-38) |  |
2447 | Headwear Accessory Visor For Standard Helmet | 6 | 163 |
| 612 (+70) |  |
32802 | Slope Inverted 45┬░ 4 x 1 Double with 1 x 2 Cutout | 6 | 163 |
| 613 (+8) |  |
88293 | Brick Round Corner 3 x 3 x 2 Dome Top | 16 | 162 |
| 614 (+93) |  |
27448 | Turntable 2 x 2 Female | 3 | 162 |
| 615 (-38) |  |
43045 | Hinge Plate 2 x 4 with Pin Hole with 2 Holes – Top | 4 | 160 |
| 616 (-15) |  |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 8 | 160 |
| 617 (+35) |  |
43892 | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch (Short Tip) | 8 | 159 |
| 618 (-24) |  |
23948 | Technic Axle 11 | 2 | 157 |
| 619 (+48) |  |
38014 | Equipment Cup / Teacup | 1 | 157 |
| 620 (-24) |  |
92099 | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 4 | 157 |
| 621 (-9) |  |
24482 | Weapon Spear Tip with Fins | 6 | 157 |
| 622 (+26) |  |
38585 | Brick Special Arch 2 x 2 Corner | 2 | 156 |
| 623 (-36) |  |
11618 | Headwear Accessory Bow with Heart, Long Ribbon and Pin | 5 | 156 |
| 624 (-1) |  |
60603 | Glass for Window 1 x 4 x 3 [Opening] | 3 | 156 |
| 625 (+89) |  |
2569 | Antenna Whip 8H | 6 | 156 |
| 626 (-22) |  |
55982 | Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes | 7 | 155 |
| 627 (-107) |  |
33299 | Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | 3 | 155 |
| 628 (+41) |  |
15279 | Plant, Grass Stem with Bar Hole [3.2mm] | 5 | 154 |
| 629 (-29) |  |
30663 | Steering Wheel Small, 2 x 2 [Reinforced] | 3 | 153 |
| 630 (-25) |  |
60032 | Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass | 7 | 153 |
| 631 (-21) |  |
85941 | Cylinder Half 2 x 4 x 5 with 1 x 2 cutout | 10 | 153 |
| 632 (-13) |  |
18946 | Technic Gear 16 Tooth with Clutch on Both Sides | 1 | 151 |
| 633 (+51) |  |
2489 | Barrel 2 x 2 x 2 | 7 | 151 |
| 634 (+102) |  |
4536 | Cupboard 2 x 3 Drawer | 6 | 150 |
| 635 (+135) |  |
41948 | Plate 8 x 8 with Half Circle | 17 | 150 |
| 636 (+84) |  |
33172 | Plant, Carrot | 4 | 149 |
| 637 (+137) |  |
66909 | Weapon Hilt Symmetric | 5 | 149 |
| 638 (+54) |  |
95347 | Support 2 x 2 x 10 Girder Triangular Vertical – Type 4 – 3 Posts, 3 Sections | 10 | 149 |
| 639 (+8) |  |
60219 | Slope Inverted 45┬░ 6 x 4 Double with 4 x 4 Cutout and 3 Holes | 10 | 148 |
| 640 (-31) |  |
50861 | Tyre 21 x 6 City Motorcycle | 1 | 148 |
| 641 (-21) |  |
32126 | Technic Axle and Pin Connector Toggle Joint Smooth | 4 | 148 |
| 642 (-74) |  |
64648 | Animal, Fish [Anti-Stud Mouth] | 5 | 148 |
| 643 (-48) |  |
48169 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 2 | 148 |
| 644 (-45) |  |
61780 | Container Box 2 x 2 x 2 – Top Opening | 6 | 148 |
| 645 (+57) |  |
65803 | Brick Special 16 x 16 x 1 1/3 with Pinholes | 4 | 147 |
| 646 (-66) |  |
93555 | Sports Ice Skate | 2 | 147 |
| 647 (+68) |  |
58090 | Tyre 30.4 x 14 VR Solid | 1 | 146 |
| 648 (+37) |  |
4445 | Slope 45┬░ 2 x 8 | 6 | 146 |
| 649 (-23) |  |
2853 | Technic Engine Crankshaft | 2 | 146 |
| 650 (+18) |  |
32072 | Technic Knob Wheel | 4 | 145 |
| 651 (-17) |  |
2655 | Wheel Holder, Plate, Round 2 x 2 Thin with Clips | 2 | 144 |
| 652 (+1026) |  |
68888 | Technic Axle Connector Hub with 4 Bars at 90┬░, Reinforced Axle Hole | 2 | 143 |
| 653 (+140) |  |
65617 | Brick Round Corner 3 x 3 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | 14 | 142 |
| 654 (-22) |  |
3675 | Slope 33┬░ 3 x 3 Double Convex | 6 | 142 |
| 655 (-30) |  |
50862 | Wheel 15 x 6 City Motorcycle | 8 | 142 |
| 656 (+9) |  |
30150 | Box / Crate with Handholds | 7 | 142 |
| 657 (+48) |  |
48208 | Wedge Plate 6 x 4 Left | 10 | 142 |
| 658 (+89) |  |
27965 | Zipline, 22L with 2 Connectors – Flexible | 7 | 142 |
| 659 (+7) |  |
45677 | Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 20 | 141 |
| 660 (+34) |  |
30046 | Window 1 x 2 x 2 2/3 Pane Lattice Diamond with Rounded Top | 2 | 141 |
| 661 (-33) |  |
92738 | Weapon Gun / Blaster Small (Star Wars) | 2 | 141 |
| 662 (-51) |  |
3648 | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | 1 | 140 |
| 663 (+406) |  |
71752 | Plate Special 2 x 2 x 2/3 with Axle Hole and Grill on Sides (Haybale) | 2 | 139 |
| 664 (-10) |  |
44568 | Hinge Plate 1 x 4 Locking Dual 1 Finger | 2 | 139 |
| 665 (+122) |  |
55236 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky | 5 | 139 |
| 666 (-23) |  |
61254 | Tyre Offset Tread 24 x 8 | 1 | 139 |
| 667 (-4) |  |
4218 | Garage Roller Door Section without Handle | 6 | 138 |
| 668 (-37) |  |
4349 | Equipment Weapon, Loudhailer / Blaster / Space Gun | 3 | 137 |
| 669 (-39) |  |
32555 | Technic Brick 5 x 5 Right Angle (1 x 4 – 1 x 4) | 2 | 137 |
| 670 (-15) |  |
2851 | Technic Engine Piston Round | 1 | 137 |
| 671 (+38) |  |
48205 | Wedge Plate 6 x 4 Right | 10 | 137 |
| 672 (+19) |  |
87989 | Equipment Medical Syringe with 2 Holes | 4 | 137 |
| 673 (-81) |  |
4175 | Plate Special 1 x 2 with Ladder | 8 | 136 |
| 674 (-60) |  |
87618 | Bar 5L with Handle (Friction Ram) | 3 | 136 |
| 675 (-14) |  |
24119 | Technic Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface | 11 | 136 |
| 676 (+57) |  |
64570 | Bracket 2 x 6 – 1 x 6 Inverted | 8 | 135 |
| 677 (-111) |  |
32059 | Wedge Plate 4 x 6 Cut Corners | 13 | 135 |
| 678 (-56) |  |
15397 | Plate 3 x 3 Cross | 5 | 135 |
| 679 (-40) |  |
4863 | Window 1 x 4 x 2 Plane | 7 | 135 |
| 680 (+48) |  |
3940b | Support 2 x 2 x 2 Stand with Reinforced Underside | 4 | 135 |
| 681 (-21) |  |
2850 | Technic Engine Cylinder with Side Slots | 2 | 135 |
| 682 (-38) |  |
43710 | Wedge Sloped 4 x 2 Triple Left | 12 | 134 |
| 683 (-26) |  |
3027 | Plate 6 x 16 | 9 | 134 |
| 684 (+158) |  |
67810 | Brick Curved 2 x 2 x 1 1/3 with Curved Top – Corner | 13 | 134 |
| 685 (+5) |  |
60212 | Wheel Arch, Mudguard 2 x 4 Studded | 7 | 133 |
| 686 (-14) |  |
2852 | Technic Engine Connecting Rod | 1 | 133 |
| 687 (-37) |  |
60169 | Chain 16L | 6 | 133 |
| 688 (-113) |  |
15391 | Launcher, Weapon Gun / Blaster / Shooter Mini | 6 | 132 |
| 689 (-48) |  |
92409 | Tyre 17.5 x 6 with Shallow Staggered Treads | 1 | 132 |
| 690 (-28) |  |
58247 | Weapon Gun / Blaster Short (Star Wars) | 4 | 132 |
| 691 (-101) |  |
44375 | Dish 6 x 6 Inverted (Radar) with Hollow Studs | 19 | 132 |
| 692 (+358) |  |
71708 | Technic Beam 2 x 3 L-Shape with Quarter Ellipse Thick | 8 | 132 |
| 693 (-48) |  |
98397 | Handlebars with Angular Handles | 5 | 131 |
| 694 (-52) |  |
32932 | Fence 1 x 4 x 2 Ornamental Asian Lattice with 4 Studs | 5 | 131 |
| 695 (+5) |  |
3044 | Slope 45┬░ 2 x 1 Double without Bottom Pin | 6 | 131 |
| 696 (+163) |  |
66789 | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs | 10 | 131 |
| 697 (-68) |  |
3049 | Slope 45┬░ 2 x 1 Double / Inverted with Bottom Tube | 7 | 130 |
| 698 (+20) |  |
2825 | Technic Beam 1 x 4 Thin with Stud Connector | 3 | 129 |
| 699 (-35) |  |
6187 | Bar 1 x 4 x 2 | 7 | 129 |
| 700 (+99) |  |
40378 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin | 10 | 129 |
| 701 (-5) |  |
37776 | Equipment Lantern | 5 | 129 |
| 702 (-21) |  |
33085 | Plant, Banana | 7 | 129 |
| 703 (+34) |  |
95228 | Equipment Bottle | 3 | 129 |
| 704 (-89) |  |
3676 | Slope Inverted 45┬░ 2 x 2 Double Convex | 10 | 128 |
| 705 (+7) |  |
4528 | Equipment Frying Pan | 3 | 128 |
| 706 (-48) |  |
4595 | Brick Special 1 x 2 x 2/3 with Studs on Sides | 4 | 128 |
| 707 (+115) |  |
3185 | Fence 1 x 4 x 2 | 4 | 127 |
| 708 (-90) |  |
3046 | Slope 45┬░ 2 x 2 Double Concave | 5 | 126 |
| 709 (+48) |  |
93604 | Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 19 | 126 |
| 710 (-40) |  |
24116 | Technic Panel Curved and Bent 6 x 3 | 11 | 126 |
| 711 (-25) |  |
32324 | Technic Brick 4 x 4 Open Center | 2 | 125 |
| 712 (+167) |  |
64847 | Animal Body Part, Horn (Cattle) | 7 | 124 |
| 713 (+137) |  |
24946 | Food Egg with 1.5mm Hole [Plain] | 5 | 124 |
| 714 (-26) |  |
6020 | Bar 7 x 3 with Double Clips (Ladder) | 7 | 123 |
| 715 (+35) |  |
32249 | Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin | 7 | 123 |
| 716 (-39) |  |
49731 | Technic Pin without Friction Ridges Lengthwise and Foil Connector | 1 | 123 |
| 717 (-79) |  |
43713 | Wedge Curved Inverted 6 x 4 | 11 | 122 |
| 718 (-94) |  |
61903 | Technic Universal Joint 3L [Complete Assembly] | 1 | 122 |
| 719 (-45) |  |
30089 | Equipment Camera Handheld with Right-Aligned Viewfinder | 3 | 122 |
| 720 (-44) |  |
72454 | Slope Inverted 45┬░ 4 x 4 Double | 6 | 122 |
| 721 (+25) |  |
87617 | Cylinder 1 x 5 1/2 with Handle (Friction Cylinder) | 4 | 122 |
| 722 (+21) |  |
43056 | Hinge Plate 2 x 4 with Pin Hole with 2 Holes – Bottom | 4 | 122 |
| 723 (-6) |  |
63082 | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 2 | 121 |
| 724 (-87) |  |
30586 | Plate Special 2 x 8 with Door Rail | 5 | 120 |
| 725 (-21) |  |
60607 | Window 1 x 2 x 3 Pane Latticed with Thick Corner Tabs | 4 | 120 |
| 726 (-23) |  |
11291 | Wedge Curved 3 x 4 x 2/3 Cutout | 12 | 120 |
| 727 (+178) |  |
73507 | Technic Beam 1 x 11 Thick with Alternating Holes | 2 | 119 |
| 728 (+140) |  |
6192 | Brick Curved 2 x 4 No Studs, Curved Top | 10 | 119 |
| 729 (-78) |  |
27393 | Wave / Power Blast Rounded Energy with Bar Handle | 7 | 119 |
| 730 (+9) |  |
4533 | Cupboard 2 x 3 x 2 Door | 4 | 119 |
| 731 (-42) |  |
69910 | Technic Link Tread 7L Wide with Two Pin Holes | 1 | 118 |
| 732 (+450) |  |
65249 | Technic Axle Pin 3L with No Friction Ridges and 2L Axle | 2 | 118 |
| 733 (-100) |  |
64727 | Weapon Spike Flexible 3.5L | 7 | 117 |
| 734 (-63) |  |
14413 | Wedge 4 x 4 Facet | 4 | 117 |
| 735 (+21) |  |
18759 | Slope Inverted 45┬░ 3 x 1 Double with 2 Blocked Open Studs | 5 | 117 |
| 736 (+36) |  |
38583 | Brick Special Arch 1 x 2 Jumper | 3 | 117 |
| 737 (-54) |  |
60583 | Brick Special 1 x 1 x 3 with 2 Clips Vertical [Solid Stud, Thick U Clips] | 6 | 117 |
| 738 (-8) |  |
95188 | Brick Round Corner 6 x 6 with 33┬░ Slope and Facet Cutout | 12 | 116 |
| 739 (+3) |  |
24593 | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout | 12 | 116 |
| 740 (+31) |  |
61072 | Plate Special 1 x 4 with Angled Tubes | 2 | 115 |
| 741 (+84) |  |
67095 | Tile Round 3 x 3 | 10 | 115 |
| 742 (-49) |  |
92692 | Plate Special 1 x 2 with Angled Handles on Side | 5 | 115 |
| 743 (-178) |  |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 6 | 115 |
| 744 (-20) |  |
55615 | Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Along Part) | 2 | 115 |
| 745 (-7) |  |
57585 | Technic Axle Connector Hub with 3 Axles at 120┬░ | 2 | 114 |
| 746 (+7) |  |
47755 | Wheel Arch, Wedge 4 x 3 Open with Cutout and Four Studs | 13 | 114 |
| 747 (+26) |  |
41748 | Wedge Curved 6 x 2 Left | 16 | 114 |
| 748 (-99) |  |
98139 | Weapon Sai | 3 | 113 |
| 749 (+5) |  |
62361 | Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended] | 16 | 112 |
| 750 (-75) |  |
2739 | Technic Link 1 x 6 without Stoppers | 2 | 112 |
| 751 (+72) |  |
36451a | Infinity Stone | 6 | 112 |
| 752 (-166) |  |
6259 | Cylinder Half 2 x 4 x 4 | 9 | 111 |
| 753 (+66) |  |
33492 | Cone 1 1/2 x 1 1/2 x 2/3 | 4 | 110 |
| 754 (-75) |  |
56890 | Tyre 24 x 12 R Balloon | 1 | 110 |
| 755 (+159) |  |
51239 | Window Frame 1 x 3 x 3 | 5 | 109 |
| 756 (+13) |  |
41747 | Wedge Curved 6 x 2 Right | 16 | 108 |
| 757 (+5) |  |
36017 | Weapon Sword Hilt with Dragon Head | 3 | 107 |
| 758 (-50) |  |
43711 | Wedge Sloped 4 x 2 Triple Right | 11 | 107 |
| 759 (+9240) |  |
79987 | Plate Special 1 x 3 with 2 Clips on Top | 1 | 107 |
| 760 (-41) |  |
6233 | Cone 3 x 3 x 2 | 11 | 107 |
| 761 (-121) |  |
3685 | Slope 75┬░ 2 x 2 x 3 Double Convex | 8 | 107 |
| 762 (+18) |  |
49283 | Wire Clip with Axle Hole | 8 | 107 |
| 763 (-42) |  |
99784 | Bar 1 x 12 with 1 x 2 Plate End with Hollow Studs and 1 x 1 Round Plate End | 5 | 107 |
| 764 (+67) |  |
53540 | Brick Special 1 x 2 with 2 Pins, Square Pin Holes | 5 | 107 |
| 765 (+18) |  |
4738a | Treasure Chest Bottom with Rear Slots | 6 | 107 |
| 766 (-6) |  |
6183 | Brick Arch 1 x 6 x 2 Curved Top | 10 | 106 |
| 767 (-87) |  |
4735 | Bar 1 x 3 [Clip / Anti-Stud] | 2 | 106 |
| 768 (-34) |  |
41854 | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings | 9 | 105 |
| 769 (-10) |  |
4739 | Treasure Chest Lid [Thick Hinge] | 6 | 105 |
| 770 (+6) |  |
19121 | Fence Ornamented 1 x 4 x 2 with 4 Studs | 6 | 104 |
| 771 (+13) |  |
3956 | Bracket 2 x 2 – 2 x 2 | 4 | 104 |
| 772 (+72) |  |
24093 | Book Cover [Plain] | 6 | 104 |
| 773 (+12) |  |
47753 | Wedge Curved 4 x 4 No Top Studs | 12 | 103 |
| 774 (+47) |  |
3228 | Vehicle Track, Train, Slotted Rail Straight | 2 | 103 |
| 775 (-77) |  |
93594 | Wheel 11 x 6 with Smooth Hubcap | 2 | 102 |
| 776 (-41) |  |
50943 | Engine / Air Scoop 2 x 2 | 5 | 102 |
| 777 (+169) |  |
61408 | Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 4 | 102 |
| 778 (-47) |  |
6190 | Bar 1 x 3 (Radio Handle, Phone Handset) | 5 | 101 |
| 779 (-39) |  |
47847 | Rock Panel 2 x 4 x 6 | 9 | 101 |
| 780 (+11) |  |
3837 | Equipment Shovel [Round Stem End] | 4 | 100 |
| 781 (+114) |  |
35442 | Plate Special 2 x 2 Splat Gear with 6 Teeth | 4 | 100 |
| 782 (+20) |  |
33051 | Plant, Apple | 4 | 100 |
| 783 (-72) |  |
30505 | Wedge 3 x 3 Cut Corner | 3 | 100 |
| 784 (+28) |  |
30151b | Brick Round 2 x 2 x 1 2/3 Dome Top [Blocked Open Stud] | 3 | 100 |
| 785 (-59) |  |
6222 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 5 | 99 |
| 786 (+156) |  |
40066 | Panel 1 x 6 x 7 with 2 Columns and Arch | 11 | 99 |
| 787 (+48) |  |
21229 | Fence Spindled 4 x 4 x 2 Quarter Round with 3 Studs | 10 | 99 |
| 788 (+20) |  |
88704 | Equipment Whip – Bent | 4 | 99 |
| 789 (-143) |  |
15092 | Plate 2 x 2 with 2 Pins | 1 | 99 |
| 790 (-80) |  |
60623 | Door 1 x 4 x 6 with 4 Panes and Stud Handle | 13 | 99 |
| 791 (+95) |  |
51270 | Plant, Pumpkin | 3 | 98 |
| 792 (-133) |  |
60608 | Window 1 x 2 x 3 Pane with Thick Corner Tabs | 5 | 98 |
| 793 (+104) |  |
35789 | Wheel Arch, Mudguard 2 x 4 x 2 | 12 | 96 |
| 794 (-88) |  |
30355 | Wedge Plate 6 x 12 Left | 8 | 96 |
| 795 (-63) |  |
48170 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | 3 | 96 |
| 796 (+102) |  |
35654 | Grille Bar 1 x 4 x 1 2/3 Bull Bar | 1 | 95 |
| 797 (+7) |  |
3852b | Equipment Hairbrush Short Handle [10mm] | 3 | 95 |
| 798 (+276) |  |
42862 | Wedge Sloped 45┬░ 3 x 3 Left | 8 | 95 |
| 799 (+274) |  |
48165 | Wedge Sloped 45┬░ 3 x 3 Right | 7 | 94 |
| 800 (-55) |  |
2926 | Plate Special 1 x 4 with Wheels Holder | 2 | 94 |
| 801 (-100) |  |
30340 | Equipment Flotation Ring [Life Preserver] | 7 | 94 |
| 802 (-14) |  |
18920 | Equipment Scissors | 1 | 94 |
| 803 (+96) |  |
25061 | Vehicle Track, Roller Coaster, Curve | 13 | 94 |
| 804 (+187) |  |
6575 | Technic Cam | 6 | 93 |
| 805 (-92) |  |
30356 | Wedge Plate 6 x 12 Right | 9 | 92 |
| 806 (+11) |  |
32017 | Technic Beam 1 x 5 Thin | 4 | 92 |
| 807 (-66) |  |
89201 | Tyre 24 x 14 Shallow Tread (Tread Small Hub), Band Around Center of Tread | 1 | 92 |
| 808 (-1) |  |
85543 | Rubber Belt Small [15mm ID] [Round Cross Section] | 1 | 92 |
| 809 (-114) |  |
60208 | Wheel 31 x 15 Technic, Pin Hole | 8 | 92 |
| 810 (+42) |  |
90370 | Musical Instrument Microphone [Plain] | 3 | 92 |
| 811 (-56) |  |
57697 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin | 1 | 92 |
| 812 (-33) |  |
10187 | Weapon Bladed Claw Spread | 4 | 91 |
| 813 (+204) |  |
66727 | Wheel 18 x 12 with Pin Hole and Stud | 4 | 91 |
| 814 (+160) |  |
65426 | Wedge Plate 2 x 4 27┬░ Right | 8 | 91 |
| 815 (-64) |  |
65098 | Technic Pin Double with Axle Hole | 2 | 91 |
| 816 (-94) |  |
32557 | Technic Pin Connector Perpendicular Long | 2 | 91 |
| 817 (+735) |  |
77765 | Technic Pin Long 3l, No Friction Ridges, with Stop and Hole | 1 | 90 |
| 818 (-15) |  |
44674 | Mudguard 2 x 4 with Molded Headlights | 13 | 90 |
| 819 (+84) |  |
71709 | Technic Panel 3 x 7 x 1 | 8 | 90 |
| 820 (+36) |  |
69858 | Plant / Animal Body Part, Tree / Branch / Tail / Appendage / Tentacle with Pin | 4 | 90 |
| 821 (+241) |  |
31990 | Equipment Oar / Paddle End | 3 | 90 |
| 822 (+53) |  |
3043 | Slope 45┬░ 2 x 2 Double | 5 | 90 |
| 823 (-136) |  |
18948 | Technic Driving Ring Connector | 1 | 89 |
| 824 (-10) |  |
3823 | Windscreen 2 x 4 x 2 | 3 | 89 |
| 825 (+66) |  |
39794 | Technic Beam Frame 7 x 11 | 4 | 89 |
| 826 (-148) |  |
27256 | Wave / Lightning Angular, Single | 7 | 89 |
| 827 (-220) |  |
98721 | Weapon Batarang | 3 | 89 |
| 828 (-27) |  |
55976 | Tyre 56 x 26 Balloon | 1 | 89 |
| 829 (-65) |  |
13349 | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] | 8 | 89 |
| 830 (-24) |  |
4176 | Windscreen 2 x 6 x 2 | 5 | 88 |
| 831 (+2) |  |
24599 | Brick Round Corner 5 x 5 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | 12 | 88 |
| 832 (+29) |  |
56904 | Wheel 30 x 14 | 6 | 88 |
| 833 (+125) |  |
53400 | Vehicle Track, Train, Plastic (RC Trains) Curved | 1 | 88 |
| 834 (+95) |  |
35470 | Plate Special 3 x 5 Cloud with 3 Center Studs | 3 | 88 |
| 835 (-60) |  |
64448 | Support 1 x 6 x 5 Girder Rectangular | 10 | 87 |
| 836 (+15) |  |
95343 | Bucket 1 x 1 x 1 | 3 | 87 |
| 837 (-85) |  |
32198 | Technic Gear 20 Tooth Bevel | 2 | 87 |
| 838 (+534) |  |
71682 | Technic Panel Fairing 2 x 3 x 1 | 10 | 87 |
| 839 (-13) |  |
4522 | Tool Hammer / Mallet Large | 1 | 87 |
| 840 (+183) |  |
30987 | Cylinder Quarter 2 x 2 x 5 (Wall) | 8 | 86 |
| 841 (+63) |  |
24869 | Wheel Roller Coaster | 1 | 86 |
| 842 (+32) |  |
6564 | Wedge 3 x 2 Right | 8 | 86 |
| 843 (-49) |  |
95199 | Weapon Gun / Pistol Two Barrel | 2 | 85 |
| 844 (+1353) |  |
69755 | Launcher Trigger, Weapon Gun Trigger | 1 | 85 |
| 845 (+254) |  |
65473 | Brick Round 2 x 2 D. Tube with 45┬░ Elbow and Axle Holes (Crossholes) at each end | 14 | 85 |
| 846 (+7) |  |
98137 | Weapon Sword, Big Blade | 6 | 85 |
| 847 (+63) |  |
6154 | Door Frame 1 x 4 x 4 (Lift) | 3 | 84 |
| 848 (+122) |  |
65429 | Wedge Plate 2 x 4 27┬░ Left | 8 | 84 |
| 849 (-105) |  |
3821 | Door 1 x 3 x 1 Right | 10 | 84 |
| 850 (-11) |  |
15745 | Rock – Heart Jewel with Shaft | 3 | 83 |
| 851 (-102) |  |
32250 | Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin | 6 | 83 |
| 852 (+74) |  |
60808 | Panel 1 x 4 x 5 with Arched Window | 9 | 83 |
| 853 (-42) |  |
44126 | Brick Curved 6 x 2 | 6 | 83 |
| 854 (+76) |  |
4727 | Plant, Flower 2 x 2 Leaves – Angular | 1 | 83 |
| 855 (-14) |  |
23405 | Panel 1 x 6 x 5 [Vertical Corrugated] | 10 | 83 |
| 856 (-28) |  |
50337 | Hinge Plate 3 x 4 Locking Dual 2 Finger | 4 | 83 |
| 857 (-75) |  |
87408 | Technic Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes | 1 | 82 |
| 858 (-53) |  |
87080 | Technic Panel Fairing # 1 Small Smooth Short, Side A | 12 | 82 |
| 859 (-27) |  |
20309 | Window 1 x 4 x 1 2/3 with Spoked Rounded Top | 7 | 82 |
| 860 (+76) |  |
34173 | Equipment Cutlery – Spoon | 1 | 81 |
| 861 (-63) |  |
6239 | Tail Shuttle | 13 | 81 |
| 862 (-135) |  |
3822 | Door 1 x 3 x 1 Left | 10 | 81 |
| 863 (-63) |  |
3456 | Plate 6 x 14 | 7 | 81 |
| 864 (-97) |  |
18854 | Headwear Accessory Glasses with Pin | 2 | 81 |
| 865 (+19) |  |
4151 | Plate Special 8 x 8 with Grille [Undetermined Center] | 4 | 81 |
| 866 (-74) |  |
87407 | Technic Gear 20 Tooth Bevel with Pin Hole | 1 | 81 |
| 867 (+273) |  |
38340 | Train Wheel RC Train 16.6 x 23 | 2 | 80 |
| 868 (+49) |  |
18838 | Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 10 | 80 |
| 869 (+8) |  |
62531 | Technic Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface | 11 | 80 |
| 870 (-105) |  |
32065 | Technic Beam 1 x 7 Thin | 6 | 80 |
| 871 (+100) |  |
35700 | Container Box 2 x 2 x 1 [Plain] | 6 | 80 |
| 872 (-52) |  |
6583 | Plate Special 1 x 6 with Train Wagon End Fence | 5 | 80 |
| 873 (-92) |  |
47759 | Wedge Sloped 45┬░ 2 x 4 Triple | 9 | 80 |
| 874 (-45) |  |
87086 | Technic Panel Fairing # 2 Small Smooth Short, Side B | 12 | 80 |
| 875 (+781) |  |
78444 | Wedge Plate 6 x 2 Right | 7 | 79 |
| 876 (-42) |  |
12885 | Equipment Paint Roller Brush Handle Edge On Handle | 2 | 79 |
| 877 (-111) |  |
93593 | Wheel 11 x 6 with 8 Spokes | 3 | 79 |
| 878 (-2) |  |
18910 | Hinge Panel 3 x 4 x 3 Curved | 6 | 78 |
| 879 (-101) |  |
54671 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth | 3 | 78 |
| 880 (+29) |  |
11010 | Minifig Ring 1 x 1 | 1 | 77 |
| 881 (-182) |  |
41669 | Technic Tooth 1 x 3 with Axle Hole [Rounded Underside] | 10 | 77 |
| 882 (-10) |  |
93595 | Wheel 11 x 6 with 8 ‘Y’ Spokes [Plain] | 1 | 76 |
| 883 (+333) |  |
65138 | Dish 4 x 4 with 4 Studs | 10 | 76 |
| 884 (-26) |  |
18944 | Technic Panel Curved 3 x 13 | 10 | 76 |
| 885 (+9) |  |
24324 | Book Binding with Two Studs | 6 | 76 |
| 886 (-163) |  |
30526 | Brick Special 1 x 2 with 2 Pins, Round Pin Holes | 2 | 76 |
| 887 (+60) |  |
49577 | Animal / Plant, Coral / Sea Weed | 4 | 76 |
| 888 (+767) |  |
78443 | Wedge Plate 6 x 2 Left | 7 | 76 |
| 889 (-11) |  |
6565 | Wedge 3 x 2 Left | 8 | 76 |
| 890 (-10) |  |
54672 | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 9 Teeth | 4 | 75 |
| 891 (-102) |  |
18945 | Technic Panel 5 x 11 x 1 Tapered | 11 | 75 |
| 892 (+954) |  |
76797 | Brick Round Corner, Curved 3 x 3 x 1 Quarter Circle | 9 | 75 |
| 893 (-84) |  |
2815 | Technic Wedge Belt Wheel Tire | 3 | 75 |
| 894 (+40) |  |
64951 | Barrel Half Large with Axle Hole | 7 | 75 |
| 895 (-100) |  |
18974 | Wheel Arch, Mudguard 4 x 2 1/2 x 2 1/3 | 11 | 74 |
| 896 (+28) |  |
92851 | Bicycle Wheel with Black Tire | 2 | 74 |
| 897 (+24) |  |
39613 | Plate Angled 3 x 3 with Heart Shape | 3 | 74 |
| 898 (-35) |  |
29111 | Insect, Spider with Elongated Tail Section | 5 | 74 |
| 899 (-72) |  |
87421 | Panel 3 x 3 x 6 Corner Wall without Bottom Indentations | 8 | 74 |
| 900 (+219) |  |
71710 | Technic Beam 1 x 15 Thick with Alternating Holes | 1 | 74 |
| 901 (-85) |  |
15413 | Tyre 49.53 x 20 | 1 | 74 |
| 902 (-65) |  |
14181 | Wedge Plate 4 x 9 with Stud Notches | 6 | 74 |
| 903 (+9096) |  |
86876 | Brick Special 1 x 2 with 1 Center Stud on 1 Side | 5 | 73 |
| 904 (+9) |  |
6124 | Equipment Magic Wand | 3 | 73 |
| 905 (+188) |  |
32235 | Axle Hose, Soft 19L | 5 | 73 |
| 906 (+29) |  |
51266 | Glass For Frame 1 x 3 x 3 | 2 | 73 |
| 907 (-47) |  |
4083 | Bar 1 x 4 x 2 with Studs | 4 | 73 |
| 908 (+14) |  |
15540 | Helicopter Landing Ski 1 x 6 with Pin Hole | 4 | 73 |
| 909 (-45) |  |
54661 | Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End | 7 | 72 |
| 910 (+246) |  |
65092 | Plate Special 8-Sided Crystal/Gem 1 x 1 x 2/3 | 2 | 72 |
| 911 (+16) |  |
4161 | Slope 33┬░ 3 x 3 | 3 | 72 |
| 912 (-76) |  |
44224 | Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 1 | 72 |
| 913 (-59) |  |
30093 | Plant, Sea Grass | 4 | 72 |
| 914 (-69) |  |
44809 | Technic Pin Connector Perpendicular 2 x 2 Bent | 4 | 72 |
| 915 (-69) |  |
15362 | Large Figure Limb Cover / Claw / Spike Large with Axle Hole | 10 | 72 |
| 916 (-78) |  |
30361 | Brick Round 2 x 2 x 2 Robot Body – without Bottom Axle Holder | 8 | 72 |
| 917 (-62) |  |
24947 | Brick Round 2 x 2 x 1 1/3 Inverted | 8 | 72 |
| 918 (-37) |  |
2340 | Tail 4 x 1 x 3 | 7 | 71 |
| 919 (+188) |  |
35186 | Technic Driving Ring Extension 8 Tooth | 3 | 71 |
| 920 (-123) |  |
6249 | Brick Special 2 x 4 with Pins | 2 | 71 |
| 921 (-36) |  |
25386 | Food Hot Dog Bun | 3 | 71 |
| 922 (-197) |  |
64867 | Wedge 4 x 4 Fractured Polygon Top | 5 | 70 |
| 923 (-133) |  |
30385 | Rock 1 x 1 Crystal 5 Point | 9 | 70 |
| 924 (-94) |  |
30395 | Hook with Towball | 1 | 70 |
| 925 (-23) |  |
64683 | Technic Panel Fairing # 3 Small Smooth Long, Side A | 11 | 70 |
| 926 (-77) |  |
14226c11 | String with End Studs 11L Overall | 1 | 70 |
| 927 (-109) |  |
43712 | Wedge Curved 6 x 4 Triple | 12 | 70 |
| 928 (-167) |  |
11954 | Technic Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface | 7 | 70 |
| 929 (-21) |  |
64391 | Technic Panel Fairing # 4 Small Smooth Long, Side B | 11 | 69 |
| 930 (+24) |  |
30134 | Stairs 7 x 4 x 6 Straight Open | 5 | 69 |
| 931 (+18) |  |
15469 | Plate Round 2 x 2 x 2/3 with + Axle Hole and 4 Leaf Extensions | 6 | 69 |
| 932 (-146) |  |
54662 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole | 3 | 69 |
| 933 (-37) |  |
76537 | Technic Shock Absorber 6.5L with Hard Spring [Complete Assembly] | 2 | 69 |
| 934 (-91) |  |
2415 | Wheel Holder 2 x 2 Thin with Clips, Plane Single | 1 | 69 |
| 935 (-23) |  |
32125 | Technic Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) | 3 | 68 |
| 936 (+24) |  |
3299 | Slope 33┬░ 2 x 4 Double | 5 | 68 |
| 937 (+28) |  |
35443 | Plate Special 4 x 4 Splat Gear with 10 Teeth | 4 | 68 |
| 938 (+9061) |  |
80015 | Plate Round 5 x 5 Macaroni | 9 | 68 |
| 939 (-77) |  |
61800 | Large Figure Wing, Small | 7 | 67 |
| 940 (-74) |  |
92107 | Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders] | 7 | 67 |
| 941 (+4) |  |
6148 | Plant, Palm Leaf Small | 3 | 67 |
| 942 (-129) |  |
3464 | Wheel Centre Small with Stub Axles (Pulley Wheel) | 2 | 66 |
| 943 (-103) |  |
41531 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar, Closed Sides on Bar | 7 | 66 |
| 944 (-74) |  |
22391 | Wedge Sloped 4 x 4 Pointed | 6 | 65 |
| 945 (-14) |  |
42876 | Food Turkey Drumstick [Short] – 20 mm Opening | 1 | 65 |
| 946 (-6) |  |
72869 | Bar Holder with Clip and 90┬░ Angle (Mechanical Leg) | 3 | 65 |
| 947 (-151) |  |
92585 | Tool Crowbar | 4 | 65 |
| 948 (+70) |  |
87693 | Headwear Accessory Plume / Feather Small with Pin | 4 | 64 |
| 949 (-66) |  |
62360 | Windscreen 3 x 6 x 1 Curved with Rectangular Stud Holder in Bottom | 14 | 64 |
| 950 (+90) |  |
11455 | Technic Pin Connector Perpendicular 2 x 4 Bent – Beam with 90 Hole ├ÿ 4.8 | 2 | 64 |
| 951 (-61) |  |
93789 | Weapon Pike / Spear Flat End | 5 | 64 |
| 952 (+130) |  |
41767 | Wedge 4 x 2 Right | 7 | 64 |
| 953 (+145) |  |
53401 | Vehicle Track, Train, Plastic (RC Trains) Straight | 1 | 64 |
| 954 (+860) |  |
77808 | Brick Special 1 x 2 Rounded with Center Bars | 4 | 64 |
| 955 (-36) |  |
18034 | Weapon Sword with Thick Crossguard (Roman Gladius) | 3 | 63 |
| 956 (-87) |  |
32529 | Technic Pin Connector Plate with One Hole (Single on Bottom) | 1 | 63 |
| 957 (+244) |  |
66857 | Tile Round 2 x 4 | 9 | 63 |
| 958 (-30) |  |
50956 | Wedge Curved 10 x 3 Right | 12 | 63 |
| 959 (-4) |  |
33322 | Headwear Accessory Crown / Tiara | 4 | 63 |
| 960 (-27) |  |
92220 | Large Figure Weapon Claw, with Clip | 4 | 63 |
| 961 (-90) |  |
2486 | Bar 1 x 8 x 2 | 4 | 62 |
| 962 (-9) |  |
3943 | Cone 4 x 4 x 2 with Axle Hole [Plain] | 8 | 62 |
| 963 (-75) |  |
74698 | Tile Round 2 x 2 – Thick Lifting Ring | 1 | 62 |
| 964 (+44) |  |
78594 | Panel 2 x 2 x 5 Corner | 2 | 62 |
| 965 (+9034) |  |
79757 | Brick Curved 2 x 2 x 2/3 Corner Double Curved Top No Studs | 4 | 62 |
| 966 (+76) |  |
24314 | Wheel Wheelchair with Fixed Black Hard Rubber Tire, with Clip Hole | 2 | 62 |
| 967 (-52) |  |
6256 | Equipment Dish / Plate / Bowl 3 x 3 [Plain] | 7 | 62 |
| 968 (-101) |  |
57520 | Technic Tread Sprocket Wheel Small | 3 | 62 |
| 969 (+36) |  |
30043 | Plate Special 1 x 4 with Arm Down | 2 | 62 |
| 970 (-59) |  |
92842 | Propeller 3 Blades 5 Diameter | 2 | 61 |
| 971 (-33) |  |
50955 | Wedge Curved 10 x 3 Left | 12 | 61 |
| 972 (+139) |  |
44709 | Weapon Gun with Studs on Side | 5 | 61 |
| 973 (-12) |  |
4489 | Wheel Wagon Large (33mm D.), hole notched for wheels holder pin | 4 | 61 |
| 974 (-74) |  |
2854 | Technic Engine Crankshaft Center | 1 | 61 |
| 975 (+35) |  |
15445 | Weapon Gun Automatic Pistol with Top Clip | 2 | 61 |
| 976 (-87) |  |
93571 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | 3 | 60 |
| 977 (+22) |  |
4515 | Slope 10┬░ 6 x 8 | 7 | 60 |
| 978 (-215) |  |
42446 | Minifig Neckwear Bracket [One Stud] | 6 | 60 |
| 979 (+214) |  |
65635 | Wheel Bearing 2 x 6 x 1 1/3 with Axle Holes and 2 x 4 Cutout | 1 | 59 |
| 980 (-48) |  |
28588 | Animal, Snake Head with Open Mouth, Fangs and Curved Neck with Bar | 5 | 59 |
| 981 (+21) |  |
90202 | Technic Pin Connector Round with 4 Clips | 2 | 59 |
| 982 (+255) |  |
72206 | Wheel Rim 24 x 12 with Black Tyre | 2 | 59 |
| 983 (+304) |  |
71771 | Slope Curved 5 x 8 x 2/3 with No Studs on Top | 2 | 59 |
| 984 (-28) |  |
23986 | Equipment Teapot | 3 | 59 |
| 985 (-93) |  |
87585 | Equipment Oar / Paddle [Reinforced] | 3 | 59 |
| 986 (+142) |  |
35485 | Weapon Chakram / Hoop Blade | 4 | 59 |
| 987 (-163) |  |
44225 | Technic Rotation Joint Disk with Pin and 3L Beam Thick | 2 | 58 |
| 988 (+155) |  |
66955 | Slope Curved 1 x 4 with 3 Layers | 7 | 58 |
| 989 (-73) |  |
15460 | Technic Steering Gear with 3 Ball Joints, Compact | 1 | 58 |
| 990 (-15) |  |
3836 | Equipment Brush / Pushbroom | 1 | 58 |
| 991 (-176) |  |
50949 | Grille with 1 x 2 Plate, Racers Car | 4 | 58 |
| 992 (-55) |  |
3300 | Slope 33┬░ 2 x 2 Double | 5 | 58 |
| 993 (-73) |  |
60599 | Door Frame 2 x 4 x 6 | 5 | 58 |
| 994 (-236) |  |
74261 | Large Figure Skeletal, Joint Extender [High Friction] | 1 | 58 |
| 995 (-23) |  |
33121 | Animal, Crab | 3 | 57 |
| 996 (-131) |  |
29109 | Weapon Sword / Machete | 3 | 57 |
| 997 (+138) |  |
32739 | Slope 4 x 6 x 2/3 Double | 7 | 57 |
| 998 (-20) |  |
13608 | Weapon Gun Ray / Sci Fi – Rounded Heat Diffusers | 4 | 57 |
| 999 (+574) |  |
42205 | Door Frame 1 x 6 x 6 | 4 | 57 |
| 1000 (-93) |  |
48933 | Wedge Sloped 4 x 4 Triple, Stud Notches | 9 | 57 |
| 1001 (+70) |  |
41768 | Wedge 4 x 2 Left | 6 | 57 |
| 1002 (-155) |  |
88393 | Brick Special 1 x 2 x 5 with Groove | 4 | 57 |
| 1003 (+8996) |  |
1748 | Tile Round 1 x 2 Half Circle | 4 | 57 |
| 1004 (+12) |  |
27262 | Windscreen 6 x 4 x 1 Hexagonal with Handle | 12 | 57 |
| 1005 (+825) |  |
78257 | Plate Special 1 x 1 with Handle on 2 Ends | 4 | 57 |
You might be wondering how many more parts exist beyond this point. Based on my analysis, (as of November 2022) there are 2647 unique parts used in sets from the past 5 years. This doesn’t even include color variations (the same part in multiple colors), printed parts, or DUPLO.
On a part by part basis, the production of LEGO parts represents a typical “Long Tail” distribution, with the very most common parts being produced in massive quantities, and the rarest parts being included in just a single set. That said, 207 parts are so rare that in the past 5 years, only one set contains that part and you only get one of them in that set!
Methodology
As mentioned in the related article 2019 Most Common LEGO Parts, my original goal in preparing this list was to determine which parts are actually most common for an upcoming 2019 refresh to the popular 2018 article Hard-to-Find LEGO Colors (and what to do about it).
Data Analysis Methodology:
- I downloaded the latest database files from rebrickable, and re-created the same relationships in Microsoft Access.
- I created supplementary tables containing preferred part names, current part colors, parts or part categories to remove from the analysis, and corrected part ID’s. (Identical parts with different Part ID’s, and nearly identical parts were merged as one part for the purposes of this analysis.)
- I created queries which simplify the dataset for the purposes of this analysis. This includes a table listing the number of pieces of each element you would get if you bought every set in a given year. The resulting table has 1/6 fewer rows than the rebrickable_Inventory_parts table it is derived from (which has 3/4 million rows.)
- This data is imported into Excel, where I have tables containing element quantities for each 5-year span starting from 2010.
- Lastly, I created a table where I can compare quantity of each part across different 5-year spans, and output the results in HTML.
There are several possible errors in the methodology used for this analysis:
- Errors in Rebrickable dataset – Any errors in the Rebricable database will be reflected in this analysis. The biggest source of errors I’ve detected so far is that many printed parts are not in one of the printed categories (Printed Bricks, Printed Tiles) for easy removal from the analysis. (Groups are specified in the rebrickable_part_categories table.)
- Errors in my queries – I had not written SQL queries in 15+ years, so I might have made a mistake!
- Errors in my analysis – The analysis included many manual steps, where I might have made mistakes.
The part images used in this article were created using scripts similar to those used to create my LEGO Brick Labels collection. (These images are smaller, and have lower contrast optimized for screen.)
Version History
This page was originally created as a supplement to the article 2019 Most Common LEGO Parts, which highlights the most common LEGO Parts, the distribution of parts (from very common to very rare), and those parts which are available in the most different colors. Lastly, the article showcases those LEGO parts which are gaining in popularity, and those which are becoming less commonly used over time. (Older versions of this data have been archived. The version history at the bottom of this page contains links.)
For archival reasons, I’ve captured a snaptshot of previous updates to this data. Each analysis is based on a 5-year span, with the caveat that data on the last year might be incomplete if all of the sets have not been released and/or had their inventories uploaded yet.
- November 26, 2022 – This is the first snapshot for the 5 year period between 2018-2022. I have also created a ‘final’ version for 2017-2021, and made it a bit easier to find earlier years at the top of the page.
Link: Most Common LEGO Parts 2018-2022 (November 2022 data).
Link: Most Common LEGO Parts 2017-2021 (November 2022 data). - September 8, 2021 – This is the first snapshot for the 5 year period between 2017-2021, and the first update to include 1000 parts (instead of just 600).
Link: Most Common LEGO Parts 2017-2021 (data Sept. 2021). - January 18, 2021 – This is the final snapshot for the 5 year period between 2016-2020.
Link: Most Common LEGO Parts 2016-2020 (data Jan. 2021). - September 13, 2020 – The data has been updated to more accurately reflect sets from 2016-2020, even though some of the 2020 sets have not been released or inventoried yet. It also includes a correction to the methodology to include just one inventory per Set ID. (ex: Rebrickable includes 5 different inventories for #41404 Emma’s Play Cube, reflecting each possible color for the mystery animal.)
Link: Most Common LEGO Parts 2016-2020 (data Sept. 2020). - April 15, 2020 – Two updates in one:
- I updated this document to offer the first look at top parts for 2016-2020, acknowledging that 2020 is just getting started…
Link: Most Common LEGO Parts 2016-2020 (data April 2020). - One final update to data for 2015-2019.
Link: Most Common LEGO Parts 2015-2019 (data April 2020).
- I updated this document to offer the first look at top parts for 2016-2020, acknowledging that 2020 is just getting started…
- January 13, 2020 – Updated version to include top 600 parts, and more accurate reflection of sets from 2015-2019, since after the new year.
Link: Most Common LEGO Parts 2015-2019 (data January 2020). - March 24, 2019 – Initial version of this analysis included the top 500 parts. Based on sets released so far in 2019.
Link: Most Common LEGO Parts 2015-2019 (data March 2019).
Please let me know if you see any errors in the data or my methodology. Thanks!
thanks this will help with my independent study for pace
Would love to read the list of those 210 extra rare parts.
CJ,
That’s a fun request and easy enough to output the data, so here you go!
https://brickarchitect.com/most-common-lego-parts/2018-2022/rarest-parts-2018-2022/
Note: I did not create images for these very rare parts. Besides, most of them are not available in LDraw suite as 3d models anyways.
Great analysis! Thanks Tom! I’m currently using this and your other analysis in the links below to assist in organising my lego. Would you have an analysis on the most common colour specific part? (eg an analysis showing that if you purchased 1 of every set from 2017-2021 and separated all the parts by colour & part, which bin would be the most full through to the most empty)
https://brickarchitect.com/2019/2019-most-common-lego-parts/
https://brickarchitect.com/2018/lego_colors/
Luke,
I am glad you enjoy these resources! I do have the data which would produce a report on a per-element basis (instead of per-part analysis), but I don’t have the data sliced and diced in that way right now.
That said, the answer to your specific question is well known… The #5 most common part is 2780 (Technic Friction Pin) and it only comes in one color (Black) – so that is the most common element at this time, probably by a large margin!
—tom
You have a small error – the image for 92582, Hinge Plate 2 x 2 Locking with 1 Finger on Top is actually the image for a mudguard.
Good catch; thank you! I will update this in the next update to the images. (I’ve already updated my local copy).
—tom
You scrolled through the whole thing?
I think a lot of people have read the whole page. It’s quite interesting to see how parts which used to be rare are common now, and seemingly common parts are sometimes less common than you might have expected.
Why are some parts marked with a darker lavender color? Or is that an Microsoft Edge-specific problem?
Where’s lego piece 26047?
It’s #136 in the list!
—Tom
P.S. You can use ctrl+F in your web browser to find specific part ID’s within the page.
This is great! Thank you. I’m using this to help me sort legos.
Do you know what you would categorize the plate with the grate in it? I’m thinking just under larger plates but I wanted to see if there was a different category. Thanks!
It is in the same category as large plates in my LEGO Brick Labels collection. Download PDF here to see the groupings: https://brickarchitect.com/labels/#download_lego_brick_labels
—Tom
Love the analysis and the contribution to the general welfare of the community. Thank you!
Have you considered a production modifier based on the number of sets produced?
I’m sure you have had this suggestion already, and would be interested in evaluation of adding it. It would be interesting to see the shift from “buy one of each set” to “buy every set”, if there is one.
Sean, I’ve definitely considered this, but it is not possible because LEGO does not publish set production numbers. Rather than guess, I simply assumed that each set is produced in equal quantities.
—Tom
Just a potential fix for you, Tom: the chart is missing the column headers — Rank, Image, Part ID, Part Name, # Colors, # Pieces.
Thanks Joe. This is good feedback, so I’ve updated both the master page you linked, and the archives to include column headers.
Sincerely,
—Tom