For the latest data visit brickarchitect.com/most-common-lego-parts/.
Most Common LEGO Parts 2017-2021 (data from September 2021)
This table is based on sets released in 2017-2021. Year-over-year comparisons are between 2017-2021 and 2016-2020.
This is preliminary analysis of sets released 2017-2021, since not all sets released in 2021 have been released and/or inventoried by now.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 1 — |  |
4073 | 1×1 Plate, Round | 48 | 38855 |
| 2 — |  |
3023 | 1×2 Plate | 52 | 34615 |
| 3 — |  |
3024 | 1×1 Plate | 47 | 27101 |
| 4 (+1) |  |
98138 | 1×1 Tile, Round | 53 | 25545 |
| 5 (-1) |  |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 21347 |
| 6 (+2) |  |
3069b | 1×2 Tile | 48 | 14231 |
| 7 (+2) |  |
3710 | 1×4 Plate | 36 | 13556 |
| 8 (-1) |  |
54200 | 1×1 Slope 30° (Cheese) | 52 | 13098 |
| 9 (-3) |  |
3004 | 1×2 Brick | 40 | 12848 |
| 10 — |  |
3005 | 1×1 Brick | 50 | 11845 |
| 11 — |  |
3020 | 2×4 Plate | 39 | 11391 |
| 12 — |  |
3022 | 2×2 Plate | 33 | 10952 |
| 13 (+2) |  |
3070b | 1×1 Tile | 44 | 9823 |
| 14 (+22) |  |
25269 | Tile Round 1 x 1 Quarter | 38 | 9236 |
| 15 (-1) |  |
15573 | 1×2 Jumper | 35 | 9177 |
| 16 (-3) |  |
6558 | Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot | 1 | 8889 |
| 17 — |  |
3021 | 2×3 Plate | 31 | 8205 |
| 18 — |  |
3623 | 1×3 Plate | 33 | 8146 |
| 19 (-3) |  |
2412b | 1×2 Tile, Grille | 23 | 8139 |
| 20 (-1) |  |
3666 | 1×6 Plate | 34 | 7497 |
| 21 — |  |
11477 | 2×1 Curved | 40 | 7064 |
| 22 — |  |
3010 | 1×4 Brick | 35 | 7023 |
| 23 (+3) |  |
2431 | 1×4 Tile | 43 | 6858 |
| 24 (+1) |  |
85984 | 1×2 Slope 30° (Double Cheese) | 36 | 6738 |
| 25 (+2) |  |
2420 | 2×2 Plate, Corner | 23 | 6695 |
| 26 (+3) |  |
15068 | 2×2 Curved | 38 | 6456 |
| 27 (-3) |  |
4274 | Technic Pin 1/2 | 2 | 6345 |
| 28 (-5) |  |
3001 | 2×4 Brick | 30 | 6332 |
| 29 (-9) |  |
3003 | 2×2 Brick | 37 | 6280 |
| 30 — |  |
85861 | 1×1 Plate, Round w/ hole | 19 | 6278 |
| 31 (-3) |  |
3062b | Brick Round 1 x 1 Open Stud | 35 | 6000 |
| 32 (+1) |  |
87079 | 2×4 Tile | 38 | 5594 |
| 33 (-1) |  |
3795 | 2×6 Plate | 31 | 5382 |
| 34 — |  |
3068b | 2×2 Tile | 37 | 5313 |
| 35 (-4) |  |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5005 |
| 36 (+2) |  |
4032 | 2×2 Plate, Round w/ Axle | 26 | 4843 |
| 37 (-2) |  |
87580 | 2×2 Jumper | 36 | 4785 |
| 38 (+13) |  |
24866 | Plant, Flower, Plate Round 1 x 1 with 5 Petals | 18 | 4701 |
| 39 — |  |
6636 | 1×6 Tile | 29 | 4514 |
| 40 (-3) |  |
3040 | 2×1 Slope 45° | 35 | 4347 |
| 41 — |  |
15712 | 1×1 Clip, Top | 19 | 4225 |
| 42 (-2) |  |
3622 | 1×3 Brick | 31 | 4115 |
| 43 (+9) |  |
63864 | 1×3 Tile | 32 | 3974 |
| 44 (-2) |  |
87087 | 1×1 Brick, Stud 1-side | 29 | 3904 |
| 45 (+1) |  |
99780 | 1×2 Bracket, Inverted | 18 | 3875 |
| 46 (-3) |  |
4070 | 1×1 Brick, Headlight | 19 | 3828 |
| 47 (-3) |  |
32062 | Technic Axle 2 Notched | 2 | 3813 |
| 48 (-1) |  |
3460 | 1×8 Plate | 30 | 3795 |
| 49 (+1) |  |
99207 | 2×2 Bracket, Inverted | 17 | 3648 |
| 50 (-1) |  |
32028 | 1×2 Plate w/ Door Rail | 18 | 3470 |
| 51 (-3) |  |
4589 | 1×1 Cone | 34 | 3440 |
| 52 (+10) |  |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 12 | 3356 |
| 53 (-8) |  |
3009 | 1×6 Brick | 29 | 3330 |
| 54 (+2) |  |
6091 | 1×2×1⅔ Curved | 32 | 3132 |
| 55 (+25) |  |
2877 | Brick Special 1 x 2 with Grill | 11 | 3115 |
| 56 (-2) |  |
3941 | 2×2 Brick, Round w/ Axle | 34 | 3094 |
| 57 — |  |
2357 | 2×2 Brick, Corner | 22 | 3087 |
| 58 (-3) |  |
11211 | 1×2 Brick, 2 Studs 1-side | 19 | 3064 |
| 59 (-6) |  |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 3 | 2989 |
| 60 — |  |
3034 | 2×8 Plate | 31 | 2953 |
| 61 (-2) |  |
4162 | 1×8 Tile | 27 | 2917 |
| 62 (+2) |  |
44728 | 2×2 Bracket | 19 | 2870 |
| 63 (-5) |  |
4085 | Plate Special 1 x 1 with Clip Vertical [Thin Open O Clip] | 15 | 2781 |
| 64 (+29) |  |
35480 | Plate Special 1 x 2 Rounded with 2 Open Studs | 17 | 2763 |
| 65 (+10) |  |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 18 | 2749 |
| 66 (-5) |  |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [Ridge Near Rim] | 7 | 2746 |
| 67 (+1) |  |
41740 | Plate Special 1 x 4 with 2 Studs with Groove [New Underside] | 27 | 2712 |
| 68 (-1) |  |
3039 | 2×2 Slope 45° | 30 | 2694 |
| 69 (+12) |  |
30136 | 1×2 Brick, Log (Palisade) | 14 | 2651 |
| 70 (-7) |  |
3660 | 2×2 Slope 45°, Inverted | 29 | 2634 |
| 71 (-6) |  |
2654 | 2×2 Round, Boat Stud | 26 | 2606 |
| 72 (-6) |  |
3700 | 1×2 Technic Brick, 1 Hole | 19 | 2558 |
| 73 (-3) |  |
98283 | 1×2 Brick, Masonry | 9 | 2508 |
| 74 (-5) |  |
3665 | 2×1 Slope 45°, Inverted | 31 | 2507 |
| 75 (+11) |  |
20482 | Tile Round 1 x 1 with Hollow Bar | 17 | 2497 |
| 76 (+1) |  |
18654 | Technic Pin Connector Round 1L [Beam] | 16 | 2446 |
| 77 (-6) |  |
4519 | Technic Axle 3 | 2 | 2426 |
| 78 (+1) |  |
92280 | 1×2 Plate w/ Clip, Top | 10 | 2414 |
| 79 (-6) |  |
59443 | Technic Axle Connector | 12 | 2396 |
| 80 (-4) |  |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 23 | 2356 |
| 81 (-3) |  |
60478 | 1×2 Plate w/ Handle, End | 19 | 2289 |
| 82 — |  |
63868 | 1×2 Plate w/ Clip End, Horizontal | 15 | 2264 |
| 83 (+47) |  |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 20 | 2249 |
| 84 (+27) |  |
33909 | Plate Special 2 x 2 with Only 2 studs | 13 | 2217 |
| 85 (-11) |  |
3713 | Technic Bush | 3 | 2200 |
| 86 (-2) |  |
99781 | Bracket 1 x 2 – 1 x 2 | 18 | 2180 |
| 87 (-2) |  |
93273 | 4×1 Curved, Double | 33 | 2144 |
| 88 (+31) |  |
99563 | Money / Gold Bar [Ingot] | 13 | 2138 |
| 89 (-6) |  |
48336 | 1×2 Plate w/ Handle, Side | 12 | 2134 |
| 90 (-1) |  |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 17 | 2086 |
| 91 (-4) |  |
3031 | Plate 4 x 4 | 21 | 2026 |
| 92 (+4) |  |
4477 | 1×10 Plate | 19 | 1991 |
| 93 (-2) |  |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] | 19 | 1988 |
| 94 (-4) |  |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 1970 |
| 95 (-3) |  |
50950 | 3×1 Curved | 32 | 1885 |
| 96 (-8) |  |
32064 | 1×2 Technic Brick, 1 Axle Hole | 15 | 1882 |
| 97 (+17) |  |
24201 | Slope Curved 2 x 1 Inverted | 22 | 1868 |
| 98 — |  |
3673 | Technic Pin without Friction Ridges Lengthwise | 2 | 1828 |
| 99 (+3) |  |
87994 | Bar 3L | 11 | 1773 |
| 100 (-3) |  |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 17 | 1767 |
| 101 (+43) |  |
27925 | Tile 2 x 2 Curved, Macaroni | 30 | 1730 |
| 102 (+50) |  |
26601 | Wedge Plate 2 x 2 Cut Corner | 21 | 1716 |
| 103 (-8) |  |
6541 | Technic Brick 1 x 1 with Hole | 18 | 1716 |
| 104 (-10) |  |
3002 | 2×3 Brick | 18 | 1670 |
| 105 (-4) |  |
62462 | Technic Pin Connector Round [Slotted] | 21 | 1670 |
| 106 (-2) |  |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 13 | 1667 |
| 107 (-2) |  |
3032 | Plate 4 x 6 | 23 | 1662 |
| 108 (+55) |  |
24246 | Tile 1 x 1 Half Circle | 31 | 1649 |
| 109 (+23) |  |
18674 | Plate Special Round 2 x 2 with Center Stud (Jumper Plate) | 17 | 1626 |
| 110 (+31) |  |
26603 | 2×3 Tile | 23 | 1607 |
| 111 (-3) |  |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 7 | 1603 |
| 112 (-2) |  |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 15 | 1574 |
| 113 (-10) |  |
32523 | Technic Beam 1 x 3 Thick | 19 | 1568 |
| 114 (-15) |  |
32316 | Technic Beam 1 x 5 Thick | 20 | 1567 |
| 115 (+14) |  |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 28 | 1562 |
| 116 (+21) |  |
26047 | Plate 1 x 1 Rounded with Handle | 9 | 1545 |
| 117 (-10) |  |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 10 | 1533 |
| 118 (-6) |  |
32000 | Technic Brick 1 x 2 [2 Holes] | 9 | 1528 |
| 119 (+75) |  |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 9 | 1522 |
| 120 (-20) |  |
6536 | Technic Axle and Pin Connector Perpendicular | 13 | 1521 |
| 121 (-6) |  |
32140 | Technic Beam 2 x 4 L-Shape Thick | 15 | 1521 |
| 122 (+1) |  |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 19 | 1511 |
| 123 (-5) |  |
30374 | Bar 4L (Lightsaber Blade / Wand) | 18 | 1492 |
| 124 (+42) |  |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 22 | 1489 |
| 125 (-19) |  |
14769 | 2×2 Tile, Round | 27 | 1486 |
| 126 (-17) |  |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 8 | 1463 |
| 127 (-6) |  |
3832 | 2×10 Plate | 16 | 1460 |
| 128 (-15) |  |
4865 | Panel 1 x 2 x 1 [Square Corners] | 24 | 1449 |
| 129 (-12) |  |
4286 | Slope 33┬░ 3 x 1 | 24 | 1428 |
| 130 (-14) |  |
32524 | Technic Beam 1 x 7 Thick | 18 | 1393 |
| 131 (-9) |  |
4740 | 2×2 Dish | 26 | 1379 |
| 132 (+11) |  |
18677 | Plate Special 1 x 2 with Pin Hole | 6 | 1378 |
| 133 (-9) |  |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 10 | 1371 |
| 134 (+5) |  |
11090 | Bar Holder with Clip | 14 | 1361 |
| 135 (-8) |  |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 19 | 1347 |
| 136 (-8) |  |
32526 | Technic Beam 3 x 5 L-Shape Thick | 18 | 1307 |
| 137 (-2) |  |
60592 | Window 1 x 2 x 2 Flat Front | 17 | 1306 |
| 138 (-18) |  |
2456 | 2×6 Brick | 19 | 1301 |
| 139 (-8) |  |
3008 | 1×8 Brick | 17 | 1291 |
| 140 (+35) |  |
87552 | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 13 | 1269 |
| 141 (-16) |  |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 11 | 1265 |
| 142 (+82) |  |
49307 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 18 | 1262 |
| 143 (-10) |  |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 1251 |
| 144 (+25) |  |
11212 | Plate 3 x 3 | 11 | 1226 |
| 145 (-7) |  |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1217 |
| 146 (+31) |  |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 12 | 1214 |
| 147 (-75) |  |
33291 | 1×1 Plate, Flower (4 Petals) | 15 | 1204 |
| 148 (+39) |  |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder (Jumper) | 20 | 1203 |
| 149 (-3) |  |
41677 | Technic Beam 1 x 2 Thin | 7 | 1203 |
| 150 (-8) |  |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 19 | 1202 |
| 151 (-2) |  |
60474 | Plate Round 4 x 4 with Pin Hole | 21 | 1201 |
| 152 (-16) |  |
53451 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 13 | 1196 |
| 153 (-13) |  |
3705 | Technic Axle 4 | 2 | 1190 |
| 154 (-20) |  |
32013 | Technic Axle and Pin Connector Angled #1 | 13 | 1189 |
| 155 — |  |
60479 | 1×12 Plate | 12 | 1176 |
| 156 (-11) |  |
60481 | Slope 65┬░ 2 x 1 x 2 | 28 | 1174 |
| 157 (-6) |  |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly] | 13 | 1167 |
| 158 (+3) |  |
15535 | Tile 2 x 2 Round with Hole | 12 | 1155 |
| 159 (+1) |  |
85080 | Brick Round Corner 2 x 2 Macaroni with Stud Notch | 27 | 1151 |
| 160 (+31) |  |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 8 | 1150 |
| 161 (+56) |  |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 12 | 1150 |
| 162 (+8) |  |
14719 | 2×2 Tile, Corner | 17 | 1112 |
| 163 (-4) |  |
3937 | Hinge Brick 1 x 2 Base | 14 | 1111 |
| 164 (+39) |  |
32828 | Plate Round 1 x 1 with Hollow Stud and Horizontal Bar 1L | 8 | 1095 |
| 165 (-17) |  |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 9 | 1093 |
| 166 (-40) |  |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 4 | 1093 |
| 167 (+46) |  |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 19 | 1090 |
| 168 (-15) |  |
3701 | Technic Brick 1 x 4 [3 Holes] | 12 | 1072 |
| 169 (+49) |  |
32803 | Slope Curved 2 x 2 Inverted | 12 | 1067 |
| 170 (-20) |  |
32073 | Technic Axle 5 | 2 | 1064 |
| 171 (-7) |  |
3065 | Brick 1 x 2 without Bottom Tube | 13 | 1063 |
| 172 (-15) |  |
40490 | Technic Beam 1 x 9 Thick | 13 | 1048 |
| 173 (-17) |  |
60601 | Glass for Window 1 x 2 x 2 Flat | 11 | 1048 |
| 174 (-16) |  |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex | 17 | 1039 |
| 175 (+1) |  |
3035 | Plate 4 x 8 | 21 | 1032 |
| 176 (-22) |  |
64644 | Equipment Telescope | 8 | 1032 |
| 177 (+4) |  |
3958 | Plate 6 x 6 | 30 | 1025 |
| 178 (-13) |  |
63965 | Bar 6L with Stop Ring | 11 | 1023 |
| 179 (-6) |  |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 1012 |
| 180 (-13) |  |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 11 | 1004 |
| 181 (+2) |  |
2450 | Wedge Plate 3 x 3 Cut Corner | 17 | 977 |
| 182 — |  |
43722 | Wedge Plate 3 x 2 Right | 22 | 976 |
| 183 (+5) |  |
43723 | Wedge Plate 3 x 2 Left | 23 | 966 |
| 184 (+57) |  |
29120 | Slope Curved 2 x 1 with Stud Notch Left | 24 | 966 |
| 185 (-38) |  |
4599b | Tap 1 x 1 with Hole in Spout | 9 | 962 |
| 186 (-2) |  |
2445 | 2×12 Plate | 20 | 958 |
| 187 (+55) |  |
29119 | Slope Curved 2 x 1 with Stud Notch Right | 24 | 949 |
| 188 (-16) |  |
49668 | Plate Special 1 x 1 with Tooth | 17 | 938 |
| 189 (+67) |  |
22385 | Tile Special 2 x 3 Pentagonal | 29 | 931 |
| 190 (-16) |  |
2432 | Tile Special 1 x 2 with Handle | 15 | 927 |
| 191 (-23) |  |
87083 | Technic Axle 4 with Stop | 1 | 923 |
| 192 (-21) |  |
32278 | Technic Beam 1 x 15 Thick | 17 | 919 |
| 193 (+3) |  |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 20 | 912 |
| 194 (+17) |  |
14716 | Brick 1 x 1 x 3 | 14 | 907 |
| 195 (-33) |  |
4081b | Plate Special 1 x 1 with Clip Light [Thick Ring] | 12 | 897 |
| 196 (-16) |  |
32525 | Technic Beam 1 x 11 Thick | 17 | 896 |
| 197 (-7) |  |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 895 |
| 198 (+11) |  |
24309 | Slope Curved 3 x 2 No Studs | 12 | 895 |
| 199 (+7) |  |
30357 | Plate Round Corner 3 x 3 | 28 | 884 |
| 200 (+7) |  |
24316 | Technic Axle 3 with Stop | 1 | 881 |
| 201 (-8) |  |
41769 | Wedge Plate 4 x 2 Right | 25 | 877 |
| 202 (-10) |  |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 7 | 872 |
| 203 (+1) |  |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 852 |
| 204 (-26) |  |
15070 | Plate Special 1 x 1 with Vertical Tooth | 15 | 851 |
| 205 (-6) |  |
41770 | Wedge Plate 4 x 2 Left | 26 | 848 |
| 206 (-8) |  |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 16 | 842 |
| 207 (-18) |  |
6632 | Technic Beam 1 x 3 Thin | 10 | 840 |
| 208 (-23) |  |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 839 |
| 209 (-30) |  |
15392 | Launcher Trigger, Weapon Gun Trigger | 2 | 831 |
| 210 (+25) |  |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 22 | 822 |
| 211 (-16) |  |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 10 | 817 |
| 212 (-26) |  |
51739 | Wedge Plate 2 x 4 | 20 | 814 |
| 213 (-3) |  |
3659 | Brick Arch 1 x 4 | 17 | 813 |
| 214 (-6) |  |
4282 | 2×16 Plate | 16 | 813 |
| 215 (+6) |  |
11203 | Tile Special 2 x 2 Inverted | 15 | 809 |
| 216 (+90) |  |
36841 | Bracket 1 x 1 – 1 x 1 | 11 | 807 |
| 217 (-2) |  |
30565 | Plate Round Corner 4 x 4 | 26 | 774 |
| 218 (+40) |  |
23443 | Bar, Thick with Hole and Bar Handle | 8 | 765 |
| 219 (-18) |  |
3037 | Slope 45┬░ 2 x 4 | 19 | 761 |
| 220 (-1) |  |
32556 | Technic Pin Long without Friction Ridges | 1 | 748 |
| 221 (-21) |  |
6231 | Panel 1 x 1 x 1 Corner | 14 | 741 |
| 222 (+106) |  |
37352 | Brick Curved 1 x 2 x 1 No Studs | 25 | 740 |
| 223 (-9) |  |
3747b | Slope Inverted 33┬░ 3 x 2 [No Connections between Studs] | 15 | 737 |
| 224 (-19) |  |
4460b | Slope 75┬░ 2 x 1 x 3 with Hollow Stud | 18 | 736 |
| 225 (-23) |  |
87620 | Wedge 2 x 2 Facet | 16 | 729 |
| 226 (-4) |  |
3176 | Plate Special 3 x 2 with Hole | 19 | 722 |
| 227 (-1) |  |
3298 | Slope 33┬░ 3 x 2 | 17 | 712 |
| 228 — |  |
93274 | Bracket 1 x 2 – 2 x 4 | 11 | 712 |
| 229 (-6) |  |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Towball | 1 | 708 |
| 230 (-3) |  |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 704 |
| 231 (+3) |  |
22961 | Technic Pin Connector Hub with 1 Axle | 7 | 703 |
| 232 (-2) |  |
88646 | Plate Special 3 x 4 with 1 x 4 Center Studs [Plain] | 6 | 696 |
| 233 (+16) |  |
44865 | Brick Special 1 x 2 with Pin | 7 | 694 |
| 234 (-14) |  |
2453 | Brick 1 x 1 x 5 with Blocked Open or Hollow Stud | 16 | 690 |
| 235 (-3) |  |
54657 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 6 | 690 |
| 236 (-7) |  |
60596 | Door Frame 1 x 4 x 6 Type 2 | 20 | 689 |
| 237 (+30) |  |
18653 | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 20 | 689 |
| 238 (-1) |  |
33183 | Plant, Carrot Top | 4 | 683 |
| 239 (-27) |  |
298c02 | Lever Small Base with Black Lever | 6 | 679 |
| 240 (-43) |  |
15379 | Technic Link Tread with Beveled Edge | 2 | 669 |
| 241 (-2) |  |
60477 | Slope 18┬░ 4 x 1 | 15 | 667 |
| 242 (-26) |  |
32039 | Technic Axle Connector with Axle Hole | 7 | 666 |
| 243 (-18) |  |
92947 | Brick Round 2 x 2 [Grill] | 10 | 662 |
| 244 (-11) |  |
3036 | Plate 6 x 8 | 19 | 657 |
| 245 (+6) |  |
2423 | Plant, Leaves 4 x 3 | 13 | 656 |
| 246 (+49) |  |
27507 | Tile 4 x 4 Curved, Macaroni | 23 | 656 |
| 247 (+10) |  |
93606 | Slope Curved 4 x 2 No Studs | 20 | 651 |
| 248 (-8) |  |
32002 | Technic Pin 3/4 | 2 | 647 |
| 249 (+26) |  |
87544 | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 14 | 646 |
| 250 (+32) |  |
24307 | Wedge Plate 2 x 2 Right | 16 | 641 |
| 251 (+3) |  |
4490 | Brick Arch 1 x 3 | 10 | 636 |
| 252 (+17) |  |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 627 |
| 253 (+13) |  |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 22 | 627 |
| 254 (-23) |  |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 6 | 623 |
| 255 (+7) |  |
3957 | Antenna 1 x 4 with Rounded Top | 10 | 623 |
| 256 (-3) |  |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 621 |
| 257 (-5) |  |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 13 | 618 |
| 258 (-20) |  |
3706 | Technic Axle 6 | 2 | 610 |
| 259 (+6) |  |
60484 | Technic Beam 3 x 3 T-Shape Thick | 7 | 609 |
| 260 (+36) |  |
24299 | Wedge Plate 2 x 2 Left | 16 | 609 |
| 261 (-17) |  |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 8 | 603 |
| 262 (+1) |  |
30503 | Wedge Plate 4 x 4 Cut Corner | 13 | 599 |
| 263 (-27) |  |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 599 |
| 264 (-14) |  |
41239 | Technic Beam 1 x 13 Thick | 15 | 598 |
| 265 (-18) |  |
44294 | Technic Axle 7 | 2 | 592 |
| 266 (-20) |  |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 24 | 578 |
| 267 (+33) |  |
73562 | Bracket 3 x 2 x 1 1/3 with Pin Bottom | 9 | 576 |
| 268 (-20) |  |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 10 | 576 |
| 269 (+1) |  |
11215 | Bracket 5 x 2 x 1 1/3 | 10 | 575 |
| 270 (-27) |  |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 570 |
| 271 (-26) |  |
4624 | Wheel 8 x 6 with Slot | 6 | 567 |
| 272 (-17) |  |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 21 | 562 |
| 273 (+24) |  |
87747 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 14 | 562 |
| 274 (+10) |  |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 5 | 559 |
| 275 (-1) |  |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 9 | 558 |
| 276 (-16) |  |
6179 | Plates Special 4 x 4 with Studs on One Edge [Plain] | 15 | 558 |
| 277 (-6) |  |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 17 | 556 |
| 278 (-14) |  |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 555 |
| 279 (+1) |  |
13547 | Slope Curved 4 x 1 Inverted | 19 | 555 |
| 280 (-7) |  |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 5 | 555 |
| 281 (+28) |  |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 6 | 552 |
| 282 (-14) |  |
3030 | Plate 4 x 10 | 15 | 552 |
| 283 (+178) |  |
35787 | Tile 45┬░ Cut 2 x 2 | 17 | 546 |
| 284 (+127) |  |
26287 | Technic Driving Ring Connector Smooth [4 rounded side walls] | 6 | 546 |
| 285 (-13) |  |
54383 | Wedge Plate 6 x 3 Right | 16 | 542 |
| 286 (-1) |  |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 14 | 540 |
| 287 (+108) |  |
41682 | Bracket 2 x 2 with 1 x 2 Vertical Studs | 14 | 534 |
| 288 (-1) |  |
2465 | 1×16 Brick | 11 | 531 |
| 289 (+2) |  |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 6 | 531 |
| 290 (-1) |  |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 14 | 530 |
| 291 (+14) |  |
18980 | Plate Round Corner 2 x 6 Double | 18 | 525 |
| 292 (-33) |  |
15462 | Technic Axle 5 with Stop | 2 | 525 |
| 293 (+10) |  |
6111 | 1×10 Brick | 11 | 524 |
| 294 (-11) |  |
54384 | Wedge Plate 6 x 3 Left | 16 | 524 |
| 295 (-19) |  |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 20 | 523 |
| 296 (+15) |  |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 7 | 523 |
| 297 (-3) |  |
3709 | Technic Plate 2 x 4 [3 Holes] | 8 | 522 |
| 298 (+9) |  |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 11 | 521 |
| 299 (-1) |  |
6589 | Technic Gear 12 Tooth Bevel | 1 | 518 |
| 300 (-39) |  |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 12 | 512 |
| 301 (-9) |  |
3702 | Technic Brick 1 x 8 [7 Holes] | 8 | 507 |
| 302 (-16) |  |
4287 | Slope Inverted 34┬░ 3 x 1 without Internal Stopper | 15 | 506 |
| 303 (+9) |  |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 9 | 502 |
| 304 — |  |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 10 | 502 |
| 305 (+26) |  |
3033 | Plate 6 x 10 | 21 | 498 |
| 306 (+2) |  |
96874 | Brick and Axle Separator v2.0 | 2 | 497 |
| 307 (-28) |  |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 490 |
| 308 (-7) |  |
92950 | Brick Arch 1 x 6 Raised Arch | 14 | 489 |
| 309 (+7) |  |
3029 | Plate 4 x 12 | 16 | 488 |
| 310 (-22) |  |
3680 | Turntable 2 x 2 Plate, Base | 5 | 487 |
| 311 (-33) |  |
3684c | Slope 75┬░ 2 x 2 x 3 [Hollow Studs] | 16 | 482 |
| 312 (-35) |  |
32449 | Technic Beam 1 x 4 Thin | 6 | 481 |
| 313 (-32) |  |
6112 | 1×12 Brick | 13 | 476 |
| 314 (+19) |  |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 11 | 471 |
| 315 (+37) |  |
88292 | Brick Arch 1 x 3 x 2 | 11 | 469 |
| 316 (+9) |  |
3007 | 2×8 Brick | 11 | 463 |
| 317 (+93) |  |
37762 | Equipment Candle Stick | 9 | 460 |
| 318 (+24) |  |
2417 | Plant, Leaves 6 x 5 | 13 | 458 |
| 319 (-17) |  |
88930 | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 19 | 456 |
| 320 (-27) |  |
4510 | Plate Special 1 x 8 with Door Rail | 10 | 453 |
| 321 (-22) |  |
18649 | Plate Special 1 x 2 with Handles on Ends | 5 | 453 |
| 322 (+60) |  |
36752a | Equipment Wand [Individual] | 8 | 450 |
| 323 (+18) |  |
22888 | Plate Round Corner 4 x 8 Double | 22 | 446 |
| 324 (+10) |  |
3045 | Slope 45┬░ 2 x 2 Double Convex | 20 | 446 |
| 325 (+88) |  |
32606 | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin | 4 | 441 |
| 326 (-9) |  |
4079b | Seat / Chair 2 x 2 with Center Sprue Mark | 12 | 440 |
| 327 (+2) |  |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 12 | 439 |
| 328 (-14) |  |
3829c01 | Steering Stand 1 x 2 with Black Steering Wheel | 6 | 439 |
| 329 (-11) |  |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 5 | 436 |
| 330 (+15) |  |
11253 | Sports Roller Skate | 7 | 433 |
| 331 (-11) |  |
6232 | Brick Special 2 x 2 with Pin and Axle Hole | 7 | 433 |
| 332 (-42) |  |
64647 | Headwear Accessory Plume / Feather / Flame Triple Point | 11 | 432 |
| 333 (-23) |  |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 7 | 429 |
| 334 (-19) |  |
50340 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 7 Teeth | 6 | 426 |
| 335 (-3) |  |
91988 | 2×14 Plate | 12 | 426 |
| 336 (-14) |  |
3703 | Technic Brick 1 x 16 [15 Holes] | 9 | 425 |
| 337 (-24) |  |
60593 | Window 1 x 2 x 3 Flat Front | 14 | 422 |
| 338 (-11) |  |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 11 | 421 |
| 339 (+4) |  |
43888 | Support 1 x 1 x 6 Solid Pillar | 13 | 416 |
| 340 (-10) |  |
15403 | Launcher, Plate Special 1 x 2 with Mini Blaster | 4 | 416 |
| 341 (-22) |  |
59349 | Panel 1 x 6 x 5 | 24 | 414 |
| 342 (+2) |  |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 411 |
| 343 (-17) |  |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Small Squared Pin Holes] | 4 | 409 |
| 344 (-6) |  |
2476 | Plate Special 2 x 2 with Pin on Bottom | 4 | 407 |
| 345 (-22) |  |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 4 | 405 |
| 346 (-25) |  |
4216 | Brick Special 1 x 2 with Groove | 11 | 402 |
| 347 (+26) |  |
43898 | Dish 3 x 3 Inverted [Radar] | 18 | 397 |
| 348 (+43) |  |
6003 | Plate Round Corner 6 x 6 | 18 | 393 |
| 349 (+52) |  |
30236 | Brick Special 1 x 2 with Handle | 7 | 392 |
| 350 (-15) |  |
2921 | Brick Special 1 x 1 with Handle | 10 | 392 |
| 351 (+5) |  |
98100 | Brick Round 2 x 2 Truncated Cone | 9 | 389 |
| 352 (+2) |  |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 8 | 381 |
| 353 (-3) |  |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 12 | 380 |
| 354 (+10) |  |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 13 | 379 |
| 355 (-15) |  |
3899 | Equipment Cup / Mug [Plain] | 7 | 379 |
| 356 (+6) |  |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 10 | 374 |
| 357 (-9) |  |
2460 | Tile Special 2 x 2 with Pin | 6 | 370 |
| 358 (+58) |  |
13548 | Wedge Sloped 45┬░ 2 x 2 Corner | 12 | 369 |
| 359 (-35) |  |
6587 | Technic Axle 3 with Stud | 3 | 366 |
| 360 (-5) |  |
41539 | Plate 8 x 8 | 20 | 366 |
| 361 (-10) |  |
3028 | Plate 6 x 12 | 19 | 366 |
| 362 (+5) |  |
3895 | Technic Brick 1 x 12 [11 Holes] | 9 | 363 |
| 363 (-24) |  |
59426 | Technic Axle 5.5 with Stop [Rounded Short End] | 1 | 360 |
| 364 (-17) |  |
6126b | Wave / Flame Rounded with Base Rim | 5 | 360 |
| 365 (-28) |  |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 7 | 360 |
| 366 (-30) |  |
15303 | Projectile, Spring Shooter Ammunition 8L | 10 | 359 |
| 367 (-9) |  |
2419 | Wedge Plate 3 x 6 Cut Corners | 15 | 355 |
| 368 (-22) |  |
43857 | Technic Beam 1 x 2 Thick | 9 | 354 |
| 369 (-10) |  |
6180 | Plate Special 4 x 6 with Studs on 3 Edges | 11 | 352 |
| 370 (-17) |  |
60849 | Equipment Hose Nozzle / Gun with Side String Hole Simplified | 4 | 352 |
| 371 (-22) |  |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 8 | 347 |
| 372 (-12) |  |
32291 | Technic Axle and Pin Connector Perpendicular Double | 7 | 345 |
| 373 (-16) |  |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 13 | 345 |
| 374 (+9) |  |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 6 | 345 |
| 375 (-12) |  |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 12 | 344 |
| 376 (+114) |  |
35464 | Slope Double 45┬░ 1 x 1 | 6 | 344 |
| 377 (+9) |  |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 6 | 344 |
| 378 (+14) |  |
15458 | Technic Panel 3 x 11 x 1 | 12 | 343 |
| 379 (+9) |  |
13731 | Brick Curved 10 x 1 [Symmetric Inside Ridges] | 15 | 341 |
| 380 (+7) |  |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 19 | 335 |
| 381 (+28) |  |
87081 | Brick Round 4 x 4 [Centre Hole] | 13 | 335 |
| 382 (-10) |  |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 6 | 334 |
| 383 (+24) |  |
11609 | Star with Stud Holder | 4 | 334 |
| 384 (-18) |  |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 3 | 333 |
| 385 (-5) |  |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 6 | 332 |
| 386 (-21) |  |
41678 | Technic Axle and Pin Connector Perpendicular Double Split | 6 | 331 |
| 387 (-17) |  |
11213 | Plate Round 6 x 6 with Hole | 16 | 331 |
| 388 (-9) |  |
57360 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 4 | 330 |
| 389 (-28) |  |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 14 | 326 |
| 390 (+3) |  |
30363 | Slope 18┬░ 4 x 2 | 11 | 325 |
| 391 (-14) |  |
2736 | Technic Axle Towball | 1 | 323 |
| 392 (-8) |  |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 19 | 322 |
| 393 (-22) |  |
42610 | Wheel 11 x 8 with Center Groove | 2 | 322 |
| 394 (-19) |  |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 9 | 322 |
| 395 (+62) |  |
24855 | Plant, Flower Stem with Bottom Pin | 3 | 322 |
| 396 (-18) |  |
92438 | Plate 8 x 16 | 24 | 322 |
| 397 (-29) |  |
2653 | Brick Special 1 x 4 with Groove | 5 | 321 |
| 398 (+72) |  |
17485 | Brick Round 2 x 2 with Pin Holes | 9 | 321 |
| 399 (+7) |  |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 317 |
| 400 (+14) |  |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 5 | 313 |
| 401 (-25) |  |
64179 | Technic Beam Frame 5 x 7 Open Center Thick | 4 | 308 |
| 402 (-8) |  |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 10 | 308 |
| 403 (-18) |  |
14696 | Technic Link, Reinforced, with Beveled Edge | 1 | 307 |
| 404 (-15) |  |
3633 | Fence 1 x 4 x 1 | 7 | 306 |
| 405 (+34) |  |
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | 17 | 301 |
| 406 (+60) |  |
23950 | Panel 1 x 3 x 1 | 10 | 301 |
| 407 (-5) |  |
87609 | Plate Special 2 x 6 x 2/3 [Four Studs on Side] | 14 | 301 |
| 408 (-8) |  |
60476 | Brick Special 1 x 1 with Clip Horizontal | 3 | 300 |
| 409 (+47) |  |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 3 | 300 |
| 410 (+20) |  |
22890 | Plate Special 1 x 2 with End Towball | 1 | 299 |
| 411 (+4) |  |
32474 | Technic Ball Joint | 16 | 299 |
| 412 (-43) |  |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 295 |
| 413 (-5) |  |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 7 | 295 |
| 414 (+62) |  |
27940 | Technic Pin Connector Hub with 2 Axles | 2 | 292 |
| 415 (+50) |  |
27261 | Plate Special 2 x 3 with rocks | 6 | 292 |
| 416 (+1) |  |
11610 | Food Ice Cream Cone | 9 | 291 |
| 417 (+4) |  |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 289 |
| 418 (-37) |  |
55013 | Technic Axle 8 with Stop | 1 | 285 |
| 419 (-29) |  |
94925 | Technic Gear 16 Tooth Reinforced [New Style] | 1 | 285 |
| 420 (-16) |  |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 5 | 283 |
| 421 (+4) |  |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Towball | 1 | 283 |
| 422 (+28) |  |
47456 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 17 | 282 |
| 423 (-20) |  |
89522 | Creature Body Part, Horn (Unicorn) | 12 | 278 |
| 424 (-25) |  |
3679 | Turntable 2 x 2 Plate – Top | 1 | 278 |
| 425 (+13) |  |
32063 | Technic Beam 1 x 6 Thin | 4 | 277 |
| 426 (+171) |  |
37775 | Wave / Flame Small with Pin | 2 | 276 |
| 427 (-4) |  |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 14 | 276 |
| 428 (-16) |  |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 6 | 275 |
| 429 (-2) |  |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 10 | 275 |
| 430 (-32) |  |
4600 | Plate Special 2 x 2 with Wheel Holders | 3 | 273 |
| 431 (+14) |  |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | 8 | 273 |
| 432 (-12) |  |
32056 | Technic Beam 3 x 3 L-Shape Thin | 7 | 273 |
| 433 (-14) |  |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 273 |
| 434 (+19) |  |
87414 | Tyre 15 x 6 Offset Tread Small with Band around Center | 1 | 270 |
| 435 (+8) |  |
3942c | Cone 2 x 2 x 2 with Completely Open Stud | 15 | 269 |
| 436 (+6) |  |
22667 | Plant, Cherries | 3 | 268 |
| 437 (-9) |  |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 265 |
| 438 (+13) |  |
6106 | Wedge Plate 6 x 6 Cut Corner | 12 | 264 |
| 439 (-65) |  |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 264 |
| 440 (-11) |  |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 264 |
| 441 (+19) |  |
57895 | Glass for Window 1 x 4 x 6 | 8 | 262 |
| 442 (-7) |  |
60485 | Technic Axle 9 | 2 | 262 |
| 443 (+15) |  |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 14 | 261 |
| 444 (-22) |  |
2723 | Technic Disk 3 x 3 | 5 | 261 |
| 445 (-9) |  |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 260 |
| 446 (+31) |  |
11208 | Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes | 6 | 260 |
| 447 (-3) |  |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 11 | 260 |
| 448 (+229) |  |
33320 | Animal, Frog | 8 | 259 |
| 449 (+222) |  |
34816 | Brick Special 1 x 2 with Vertical Closed Handle on Edge | 8 | 258 |
| 450 (-53) |  |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 257 |
| 451 (-27) |  |
2496 | Wheel Skateboard / Trolley | 3 | 257 |
| 452 (-34) |  |
50745 | Wheel Arch, Mudguard 4 x 2 1/2 x 2 | 15 | 256 |
| 453 (+41) |  |
30099 | Brick Arch 1 x 5 x 4 Inverted | 14 | 255 |
| 454 (-58) |  |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 255 |
| 455 (+7) |  |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 11 | 253 |
| 456 (-25) |  |
3707 | Technic Axle 8 | 2 | 252 |
| 457 (+39) |  |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 3 | 251 |
| 458 (+1) |  |
2343 | Equipment Goblet / Glass | 6 | 249 |
| 459 (-33) |  |
4488 | Plate Special 2 x 2 with Wheel Holder | 2 | 249 |
| 460 (-27) |  |
3830 | Hinge Brick 1 x 4 [Upper] | 10 | 248 |
| 461 (-27) |  |
3831 | Hinge Brick 1 x 4 [Lower] | 10 | 248 |
| 462 (-25) |  |
30165 | Brick Curved 2 x 2 with Two Top Studs | 17 | 247 |
| 463 (-23) |  |
64782 | Technic Panel 1 x 5 x 11 | 13 | 245 |
| 464 (+99) |  |
39739 | Tile 1 x 1 Heart | 9 | 242 |
| 465 (+26) |  |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 15 | 240 |
| 466 (+19) |  |
61485 | Turntable 4 x 4 Square Base, Locking | 4 | 240 |
| 467 (+15) |  |
85943 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 2 | 238 |
| 468 (+19) |  |
90195 | Window 1 x 2 x 2 Castle | 8 | 238 |
| 469 (-64) |  |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 4 | 238 |
| 470 (-6) |  |
30162 | Equipment Binoculars | 5 | 237 |
| 471 (-39) |  |
99008 | Technic Axle 4 with Centre Stop | 1 | 236 |
| 472 (-26) |  |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 236 |
| 473 (-6) |  |
32001 | Technic Plate 2 x 6 [5 Holes] | 7 | 235 |
| 474 (+4) |  |
3297 | Slope 33┬░ 3 x 4 | 11 | 234 |
| 475 (+5) |  |
11946 | Technic Panel Fairing #21 Very Small Smooth, Side B | 19 | 234 |
| 476 (+12) |  |
47398 | Wedge Plate 12 x 3 Right | 11 | 234 |
| 477 (+4) |  |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 233 |
| 478 (-3) |  |
33078 | Food Hot Dog / Sausage | 6 | 233 |
| 479 (+35) |  |
25893 | Plate Round 1 x 1 with Open Stud and Bar on Underside | 3 | 232 |
| 480 (-9) |  |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 5 | 232 |
| 481 (-2) |  |
33243 | Brick Curved 1 x 3 x 2 | 16 | 231 |
| 482 (+4) |  |
11947 | Technic Panel Fairing #22 Very Small Smooth, Side A | 19 | 231 |
| 483 (+38) |  |
60616 | Door 1 x 4 x 6 Smooth with Square Handle Plinth | 11 | 230 |
| 484 (-43) |  |
50304 | Wedge Plate 8 x 3 Right | 14 | 229 |
| 485 (+23) |  |
14718 | Panel 1 x 4 x 2 with Side Supports – Hollow Studs | 10 | 227 |
| 486 (-37) |  |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 9 | 226 |
| 487 (+12) |  |
15456 | Plate Special 2 x 2 with Towball and Hole | 2 | 224 |
| 488 (-15) |  |
98282 | Wheel Arch, Mudguard 4 x 2 1/2 x 1 | 12 | 223 |
| 489 (-34) |  |
15400 | Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 1 | 222 |
| 490 (+180) |  |
66792 | Plate Round Corners 4 x 4 x 2/3 Circle with Reduced Knobs | 14 | 221 |
| 491 (-28) |  |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 8 | 220 |
| 492 (-18) |  |
40344 | Technic Brick 4 x 6 Open Center | 3 | 220 |
| 493 (+25) |  |
11209 | Tyre 21 x 9.9 | 1 | 219 |
| 494 (+1) |  |
16577 | Brick Arch 1 x 8 x 2 Raised | 13 | 218 |
| 495 (-47) |  |
50305 | Wedge Plate 8 x 3 Left | 14 | 218 |
| 496 (+11) |  |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 6 | 218 |
| 497 (-13) |  |
30031 | Handlebars | 7 | 217 |
| 498 (+79) |  |
22886 | Brick 1 x 2 x 3 with Bottom Stud Holder | 7 | 217 |
| 499 (-45) |  |
33299 | Technic Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced | 3 | 214 |
| 500 (+10) |  |
47397 | Wedge Plate 12 x 3 Left | 11 | 214 |
| 501 (-9) |  |
46212 | Brick 1 x 2 x 5 without Side Supports | 10 | 213 |
| 502 (+47) |  |
47458 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 9 | 212 |
| 503 (+73) |  |
22484 | Bar 2L with Towball | 4 | 212 |
| 504 (+98) |  |
30166 | Minifig Shield Rectangular with 4 Studs | 5 | 210 |
| 505 (-37) |  |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 14 | 209 |
| 506 — |  |
53923 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 4 | 208 |
| 507 (+187) |  |
37695 | Plant, Stem with 3 Leaves and Bottom Pin | 3 | 205 |
| 508 (-6) |  |
40345 | Technic Brick 6 x 8 with Open Center 4 x 6 | 3 | 205 |
| 509 (+24) |  |
6215 | Brick Curved 2 x 3 with Curved Top | 15 | 205 |
| 510 (+61) |  |
45590 | Technic Axle Connector Double Flexible [Rubber] | 1 | 204 |
| 511 (-39) |  |
3038 | Slope 45┬░ 2 x 3 | 5 | 204 |
| 512 (+96) |  |
10202 | Tile 6 x 6 with Bottom Tubes | 8 | 202 |
| 513 (-24) |  |
30044 | Window 1 x 2 x 2 2/3 with Rounded Top | 8 | 201 |
| 514 (+23) |  |
3738 | Technic Plate 2 x 8 [7 Holes] | 9 | 201 |
| 515 (-68) |  |
30602 | Slope Curved 2 x 2 with Lip, No Studs | 20 | 201 |
| 516 (+4) |  |
92690 | Bar 1L with Top Stud and Two Side Studs | 5 | 200 |
| 517 (+17) |  |
6182 | Brick Arch 1 x 4 x 2 | 11 | 200 |
| 518 (+36) |  |
42023 | Brick Curved 6 x 1 Inverted | 10 | 199 |
| 519 (-19) |  |
30145 | Brick 2 x 2 x 3 | 7 | 199 |
| 520 (+9) |  |
6191 | Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top with Raised Inside Support | 20 | 197 |
| 521 (-28) |  |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 197 |
| 522 (-11) |  |
61482 | Equipment Handcuffs | 5 | 195 |
| 523 (+64) |  |
22889 | Slope Inverted 45┬░ 6 x 2 Double with 2 x 4 Cutout | 13 | 195 |
| 524 (+7) |  |
40379 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 15 | 195 |
| 525 (-42) |  |
30157 | Plate Special 2 x 4 with Pins | 4 | 194 |
| 526 (+919) |  |
69729 | Tile 2 x 6 | 11 | 192 |
| 527 (+48) |  |
18853 | Plant, Flower with Pointed Petals and Pin | 4 | 191 |
| 528 (-59) |  |
92907 | Technic Axle and Pin Connector Perpendicular Split | 5 | 191 |
| 529 (+36) |  |
64225 | Wedge Curved 4 x 3 No Studs [Plain] | 16 | 191 |
| 530 (+80) |  |
48171 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side] | 2 | 190 |
| 531 (+13) |  |
98834 | Spoiler 2 x 4 with Handle [Plain] | 12 | 189 |
| 532 (-28) |  |
2639 | 4×4 Plate, Corner | 3 | 189 |
| 533 (+46) |  |
42022 | Brick Curved 6 x 1 | 15 | 189 |
| 534 (-31) |  |
4345 | Box 2 x 2 x 2 [Hollow Studs] | 4 | 188 |
| 535 (-7) |  |
3708 | Technic Axle 12 | 2 | 188 |
| 536 (-24) |  |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 187 |
| 537 (+1) |  |
98585 | Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 9 | 187 |
| 538 (-41) |  |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 10 | 186 |
| 539 (+41) |  |
35044 | Plate Special 4 x 4 with Curved Cutout | 9 | 185 |
| 540 (-14) |  |
14720 | Technic Beam 3 x 5 Thick [90┬░ Offset Centre Beam Holes] | 3 | 184 |
| 541 (+64) |  |
28326 | Wheel Arch, Mudguard 3 x 4 with 2 x 2 Plate | 9 | 184 |
| 542 (+480) |  |
67329 | Brick Special 1 x 2 x 1 2/3 with Eight Studs on 3 Sides | 5 | 183 |
| 543 (-30) |  |
4346 | Box 2 x 2 x 2 Door with Slot | 6 | 183 |
| 544 (+1) |  |
85975 | Cone 1.17 x 1.17 x 2/3 (Fez) | 9 | 182 |
| 545 (-30) |  |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 182 |
| 546 (-37) |  |
6157 | Plate Special 2 x 2 with Wheels Holder Wide | 3 | 182 |
| 547 (-22) |  |
30562 | Panel 4 x 4 x 6 Quarter Cylinder | 13 | 182 |
| 548 (-21) |  |
2462 | Wedge 3 x 3 Facet | 4 | 181 |
| 549 (+42) |  |
26599 | Plate Special 2 x 4 Pin Holes on Bottom Dia. 4.85 | 2 | 181 |
| 550 (-2) |  |
30526 | Brick Special 1 x 2 with 2 Pins | 3 | 179 |
| 551 (-53) |  |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 8 | 178 |
| 552 (+7) |  |
13564 | Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue – Long | 6 | 178 |
| 553 (-30) |  |
3006 | 2×10 Brick | 9 | 177 |
| 554 (+461) |  |
65578 | Bar, Angled with Stud on End | 3 | 177 |
| 555 (+1) |  |
93160 | Animal Body Part, Dog Bone [Short] | 4 | 176 |
| 556 (+157) |  |
38320 | Bars For Window 1 x 2 x 2 | 3 | 175 |
| 557 (-38) |  |
32059 | Wedge Plate 4 x 6 Cut Corners | 15 | 175 |
| 558 (+11) |  |
6060 | Brick Arch 1 x 6 x 3 1/3 Curved Top | 14 | 174 |
| 559 (-58) |  |
15391 | Launcher, Weapon Gun / Blaster / Shooter Mini | 6 | 173 |
| 560 (-17) |  |
15209 | Plate 1 x 2 Special with Two Vertical Teeth | 6 | 172 |
| 561 (-44) |  |
18977 | Tyre 24 x 12 Low Profile | 1 | 171 |
| 562 (-23) |  |
92338 | Chain 5 links | 6 | 170 |
| 563 (-27) |  |
92410 | Cupboard 2 x 3 x 2 with Solid Studs | 10 | 170 |
| 564 (-12) |  |
64648 | Animal, Fish [Anti-Stud Mouth] | 6 | 169 |
| 565 (-113) |  |
24375 | Rubber Technic Tread Attachment | 2 | 168 |
| 566 (-61) |  |
11618 | Headwear Accessory Bow with Heart, Long Ribbon and Pin | 5 | 166 |
| 567 (-27) |  |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 165 |
| 568 (-46) |  |
43045 | Hinge Plate 2 x 4 with Pin Hole with 2 Holes – Top | 4 | 165 |
| 569 (-18) |  |
4590 | Plate Special 1 x 4 Offset | 6 | 164 |
| 570 (-15) |  |
19220 | Equipment Radio [Extended Handle, Expanded Speaker Grille] | 3 | 163 |
| 571 (-21) |  |
95344 | Bucket 1 x 1 x 1 Handle | 5 | 163 |
| 572 (+78) |  |
25375 | Tassel with 1 x 1 Round Stud | 2 | 162 |
| 573 (-6) |  |
57909 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 3 | 162 |
| 574 (+108) |  |
90258 | Brick Special 2 x 2 with Grooves and Axle Hole | 2 | 161 |
| 575 (+3) |  |
10884 | Plant, Leaves 6 x 5 Swordleaf with Clip (thick open O clip) | 6 | 159 |
| 576 (+77) |  |
48169 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket | 4 | 159 |
| 577 (+161) |  |
39789 | Brick Special 2 x 4 with 3 Axle Holes | 6 | 158 |
| 578 (-48) |  |
2447 | Headwear Accessory Visor For Standard Helmet | 5 | 158 |
| 579 (-15) |  |
4175 | Plate Special 1 x 2 with Ladder | 9 | 158 |
| 580 (-64) |  |
3743 | Technic Gear Rack 1 x 4 | 3 | 157 |
| 581 (+9418) |  |
73825 | Bracket 1 x 1 – 1 x 2 Inverted | 10 | 156 |
| 582 (+4) |  |
30663 | Steering Wheel Small, 2 x 2 [Reinforced] | 2 | 154 |
| 583 (-26) |  |
3960 | Dish 4 x 4 Inverted [Radar] | 14 | 154 |
| 584 (-1) |  |
4006 | Tool Screwdriver and Spanner / Wrench | 3 | 152 |
| 585 (-11) |  |
76766 | Bracket 5 x 2 x 2 1/3 | 5 | 152 |
| 586 (+130) |  |
28870 | Ornament with Bar | 8 | 152 |
| 587 (-6) |  |
61780 | Container Box 2 x 2 x 2 – Top Opening | 4 | 151 |
| 588 (+9411) |  |
70681 | Brick Curved 3 x 1 with 2/3 Inverted Cutout | 6 | 151 |
| 589 (-31) |  |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 7 | 150 |
| 590 (-66) |  |
44375 | Dish 6 x 6 Inverted (Radar) with Hollow Studs | 19 | 150 |
| 591 (-45) |  |
55982 | Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes | 7 | 148 |
| 592 (+3) |  |
52031 | Slope Curved 4 x 6 x 2/3 Triple Curved with 4 Studs | 20 | 148 |
| 593 (+9406) |  |
73230 | Brick 1 x 1 with Axle Hole | 5 | 147 |
| 594 (+28) |  |
85941 | Cylinder Half 2 x 4 x 5 with 1 x 2 cutout | 10 | 145 |
| 595 (-54) |  |
3648 | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | 1 | 144 |
| 596 (+16) |  |
87618 | Bar 5L with Handle (Friction Ram) | 3 | 144 |
| 597 (-24) |  |
50254 | Train Wheel Small, hole notched for wheels holder pin | 1 | 144 |
| 598 (-28) |  |
3737 | Technic Axle 10 | 2 | 144 |
| 599 (-37) |  |
91405 | Plate 16 x 16 | 12 | 144 |
| 600 (-47) |  |
24482 | Weapon Spear Tip with Fins | 5 | 143 |
| 601 (-11) |  |
60032 | Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass | 6 | 143 |
| 602 (+39) |  |
32126 | Technic Axle and Pin Connector Toggle Joint Smooth | 4 | 143 |
| 603 (-3) |  |
92099 | Plate Special 4 x 6 with Trap Door Hinge [Long Pins] | 4 | 142 |
| 604 (+7) |  |
3049 | Slope 45┬░ 2 x 1 Double / Inverted with Bottom Tube | 8 | 142 |
| 605 (-21) |  |
98721 | Weapon Batarang | 4 | 141 |
| 606 (-38) |  |
88293 | Brick Round Corner 3 x 3 x 2 Dome Top | 17 | 141 |
| 607 (-41) |  |
92738 | Weapon Gun / Blaster Small (Star Wars) | 2 | 140 |
| 608 (+24) |  |
60603 | Glass for Window 1 x 4 x 3 [Opening] | 3 | 140 |
| 609 (-21) |  |
15397 | Plate 3 x 3 Cross | 5 | 140 |
| 610 (+37) |  |
6254 | Food Ice Cream Scoops | 6 | 139 |
| 611 (-12) |  |
90540 | Bar 3L, with Handle, Stop Ring and Side Stops (Minifig Ski Pole) | 6 | 139 |
| 612 (-14) |  |
4349 | Equipment Weapon, Loudhailer / Blaster / Space Gun | 3 | 139 |
| 613 (-52) |  |
2655 | Wheel Holder, Plate, Round 2 x 2 Thin with Clips | 1 | 139 |
| 614 (+113) |  |
39793 | Technic Connector Beam 3 x 3 | 6 | 138 |
| 615 (+40) |  |
3675 | Slope 33┬░ 3 x 3 Double Convex | 8 | 138 |
| 616 (-20) |  |
3676 | Slope Inverted 45┬░ 2 x 2 Double Convex | 12 | 138 |
| 617 (-4) |  |
43713 | Wedge Curved Inverted 6 x 4 | 12 | 138 |
| 618 (+33) |  |
64727 | Weapon Spike Flexible 3.5L | 8 | 136 |
| 619 (-25) |  |
6259 | Cylinder Half 2 x 4 x 4 | 7 | 136 |
| 620 — |  |
61254 | Tyre Offset Tread with Center Band 23 x 7 | 1 | 135 |
| 621 (-20) |  |
21445 | Plate Special 1 x 2 with Wheel Holder, Single Slit | 2 | 135 |
| 622 (-33) |  |
15092 | Plate 2 x 2 with 2 Pins | 1 | 135 |
| 623 (+7) |  |
50861 | Tyre 21 x 6 City Motorcycle | 1 | 134 |
| 624 (-5) |  |
62113 | Bar 1 x 4 x 3 [End Tabs] | 5 | 134 |
| 625 (+12) |  |
91501 | Panel 2 x 2 x 1 Corner | 3 | 134 |
| 626 (-23) |  |
43710 | Wedge Sloped 4 x 2 Triple Left | 15 | 133 |
| 627 (-42) |  |
19807a | Weapon Throwing Star / Shuriken with Smooth Grips | 2 | 133 |
| 628 (-22) |  |
92409 | Tyre 17.5 x 6 with Shallow Staggered Treads | 1 | 133 |
| 629 (+6) |  |
50862 | Wheel 15 x 6 City Motorcycle | 8 | 132 |
| 630 (-21) |  |
30586 | Plate Special 2 x 8 with Door Rail | 6 | 132 |
| 631 (-89) |  |
18946 | Technic Gear 16 Tooth with Clutch on Both Sides | 1 | 131 |
| 632 (+35) |  |
32555 | Technic Brick 5 x 5 Right Angle (1 x 4 – 1 x 4) | 3 | 131 |
| 633 (+62) |  |
38585 | Brick Special Arch 2 x 2 Corner | 2 | 130 |
| 634 (+26) |  |
4218 | Garage Roller Door Section without Handle | 6 | 130 |
| 635 (-31) |  |
16770 | Creature Body Part, Barb Large (Claw, Talon) with Clip | 8 | 130 |
| 636 (-5) |  |
23948 | Technic Axle 11 | 2 | 130 |
| 637 (+8) |  |
93555 | Sports Ice Skate | 2 | 130 |
| 638 (+1) |  |
44568 | Hinge Plate 1 x 4 Locking Dual 1 Finger | 2 | 129 |
| 639 (+26) |  |
30504 | Wedge Plate 8 x 8 Cut Corner | 9 | 129 |
| 640 (-14) |  |
61903 | Technic Universal Joint 3L [Complete Assembly] | 1 | 129 |
| 641 (+71) |  |
43892 | Animal Body Part / Plant, Tail / Trunk / Tentacle / Tongue / Vine / Tree Branch | 7 | 128 |
| 642 (+102) |  |
35459 | Tile Special 1 x 3 Inverted with Center Hole | 11 | 128 |
| 643 (+55) |  |
98397 | Handlebars with Angular Handles | 4 | 128 |
| 644 (+5) |  |
24119 | Technic Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface | 10 | 127 |
| 645 (-98) |  |
32072 | Technic Knob Wheel | 3 | 127 |
| 646 (+380) |  |
65509 | Plate Special 2 x 4 with Groove and Two Center Studs (Jumper) | 7 | 126 |
| 647 (-65) |  |
60608 | Window 1 x 2 x 3 Pane with Thick Corner Tabs | 5 | 126 |
| 648 (-34) |  |
4595 | Brick Special 1 x 2 x 2/3 with Studs on Sides | 4 | 124 |
| 649 (-89) |  |
3685 | Slope 75┬░ 2 x 2 x 3 Double Convex | 8 | 124 |
| 650 (+133) |  |
32932 | Fence 1 x 4 x 2 Ornamental Asian Lattice with 4 Studs | 4 | 124 |
| 651 (-33) |  |
60169 | Chain 16L | 8 | 124 |
| 652 (+9) |  |
24116 | Technic Panel Curved and Bent 6 x 3 | 10 | 123 |
| 653 (+38) |  |
2853 | Technic Engine Crankshaft | 2 | 123 |
| 654 (+14) |  |
45677 | Slope Curved 4 x 4 x 2/3 Triple Curved with 2 Studs | 17 | 123 |
| 655 (-11) |  |
49731 | Technic Pin without Friction Ridges Lengthwise and Foil Connector | 1 | 123 |
| 656 (-84) |  |
58247 | Weapon Gun / Blaster Short (Star Wars) | 4 | 123 |
| 657 (+68) |  |
27256 | Wave / Lightning Angular, Single | 7 | 122 |
| 658 (+18) |  |
56890 | Tyre 24 x 12 R Balloon | 1 | 122 |
| 659 (+76) |  |
27393 | Wave / Power Blast Rounded Energy with Bar Handle | 8 | 122 |
| 660 (+2) |  |
19119 | Plant, Flower Stem with Bar and 6 Stems | 3 | 121 |
| 661 (-46) |  |
60219 | Slope Inverted 45┬░ 6 x 4 Double with 4 x 4 Cutout and 3 Holes | 8 | 121 |
| 662 (+12) |  |
2739 | Technic Link 1 x 6 without Stoppers | 2 | 121 |
| 663 (-35) |  |
72454 | Slope Inverted 45┬░ 4 x 4 Double | 8 | 120 |
| 664 (-28) |  |
60583 | Brick Special 1 x 1 x 3 with 2 Clips Vertical [Solid Stud, Thick U Clips] | 6 | 120 |
| 665 (+50) |  |
14413 | Wedge 4 x 4 Facet | 4 | 120 |
| 666 (-73) |  |
18948 | Technic Driving Ring Connector | 1 | 120 |
| 667 (-25) |  |
30089 | Equipment Camera Handheld with Right-Aligned Viewfinder | 3 | 119 |
| 668 (+84) |  |
33085 | Plant, Banana | 8 | 118 |
| 669 (+50) |  |
30150 | Box / Crate with Handholds | 7 | 117 |
| 670 (-22) |  |
6020 | Bar 7 x 3 with Double Clips (Ladder) | 7 | 117 |
| 671 (-46) |  |
3027 | Plate 6 x 16 | 10 | 117 |
| 672 (-15) |  |
60212 | Wheel Arch, Mudguard 2 x 4 Studded | 8 | 117 |
| 673 (-57) |  |
6187 | Bar 1 x 4 x 2 | 8 | 116 |
| 674 (-142) |  |
41669 | Technic Tooth 1 x 3 with Axle Hole [Rounded Underside] | 12 | 116 |
| 675 (+169) |  |
32802 | Slope Inverted 45┬░ 4 x 1 Double with 1 x 2 Cutout | 5 | 115 |
| 676 (-69) |  |
93594 | Wheel 11 x 6 with Smooth Hubcap | 1 | 114 |
| 677 (-56) |  |
3046 | Slope 45┬░ 2 x 2 Double Concave | 4 | 113 |
| 678 (-9) |  |
98139 | Weapon Sai | 3 | 113 |
| 679 (-45) |  |
30340 | Equipment Flotation Ring [Life Preserver] | 8 | 113 |
| 680 (+43) |  |
2599 | Minifig Footwear Flipper [Thick] | 6 | 113 |
| 681 (+22) |  |
95347 | Support 2 x 2 x 10 Girder Triangular Vertical – Type 4 – 3 Posts, 3 Sections | 8 | 113 |
| 682 (-19) |  |
3044 | Slope 45┬░ 2 x 1 Double without Bottom Pin | 4 | 112 |
| 683 (-91) |  |
2569 | Antenna Whip 8H | 6 | 110 |
| 684 (-30) |  |
43711 | Wedge Sloped 4 x 2 Triple Right | 14 | 110 |
| 685 (+4) |  |
27928 | Plate Special 2 x 2 Wedge, Center Stud, 1 x 1/2 Raised Tab | 2 | 110 |
| 686 (+171) |  |
37776 | Equipment Lantern | 5 | 110 |
| 687 (-29) |  |
18854 | Headwear Accessory Glasses with Pin | 2 | 109 |
| 688 (+52) |  |
99784 | Bar 1 x 12 with 1 x 2 Plate End with Hollow Studs and 1 x 1 Round Plate End | 4 | 108 |
| 689 (+65) |  |
30505 | Wedge 3 x 3 Cut Corner | 3 | 108 |
| 690 (+18) |  |
60208 | Wheel 31 x 15 Technic | 7 | 108 |
| 691 (+2) |  |
87989 | Equipment Medical Syringe with 2 Holes | 3 | 108 |
| 692 (-75) |  |
4735 | Bar 1 x 3 [Clip / Anti-Stud] | 2 | 108 |
| 693 (-70) |  |
64867 | Wedge 4 x 4 Fractured Polygon Top | 6 | 107 |
| 694 (-42) |  |
2825 | Technic Beam 1 x 4 Thin with Stud Connector | 3 | 107 |
| 695 (-23) |  |
24122 | Large Figure Weapon Lightsaber Hilt with Axle Hole and Two Bar Holders | 4 | 107 |
| 696 (+5) |  |
4445 | Slope 45┬░ 2 x 8 | 6 | 107 |
| 697 (-9) |  |
30046 | Window 1 x 2 x 2 2/3 Pane Lattice Diamond with Rounded Top | 2 | 106 |
| 698 (-25) |  |
58090 | Tyre 30.4 x 14 VR Solid | 1 | 106 |
| 699 — |  |
48170 | Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] | 3 | 106 |
| 700 (+186) |  |
38014 | Equipment Cup / Teacup | 1 | 106 |
| 701 (+1) |  |
2489 | Barrel 2 x 2 x 2 | 6 | 106 |
| 702 (+135) |  |
27448 | Turntable 2 x 2 Female | 2 | 106 |
| 703 (+136) |  |
48208 | Wedge Plate 6 x 4 Left | 9 | 106 |
| 704 (-75) |  |
30355 | Wedge Plate 6 x 12 Left | 9 | 106 |
| 705 (-30) |  |
50943 | Engine / Air Scoop 2 x 2 | 5 | 105 |
| 706 (+31) |  |
92692 | Plate Special 1 x 2 with Angled Handles on Side | 4 | 105 |
| 707 (+139) |  |
48205 | Wedge Plate 6 x 4 Right | 9 | 105 |
| 708 (+31) |  |
6233 | Cone 3 x 3 x 2 | 11 | 105 |
| 709 (-13) |  |
60623 | Door 1 x 4 x 6 with 4 Panes and Stud Handle | 13 | 105 |
| 710 (-77) |  |
41854 | Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings | 11 | 105 |
| 711 (+417) |  |
66956 | Slope Curved 2 x 2 with Stud Notches | 10 | 104 |
| 712 (-72) |  |
30356 | Wedge Plate 6 x 12 Right | 9 | 104 |
| 713 (+54) |  |
60607 | Window 1 x 2 x 3 Pane Latticed with Thick Corner Tabs | 4 | 104 |
| 714 (-50) |  |
2850 | Technic Engine Cylinder with Side Slots | 1 | 104 |
| 715 (-9) |  |
32324 | Technic Brick 4 x 4 Open Center | 2 | 104 |
| 716 (+264) |  |
65803 | Brick Special 16 x 16 x 1 1/3 with Pinholes | 2 | 104 |
| 717 (-61) |  |
4863 | Window 1 x 4 x 2 Plane | 7 | 103 |
| 718 (-94) |  |
42446 | Minifig Neckwear Bracket [One Stud] | 6 | 103 |
| 719 (-40) |  |
47847 | Rock Panel 2 x 4 x 6 | 8 | 103 |
| 720 (+167) |  |
64570 | Bracket 2 x 6 – 1 x 6 Inverted | 7 | 103 |
| 721 (-40) |  |
11291 | Wedge Curved 3 x 4 x 2/3 Cutout | 9 | 102 |
| 722 (+308) |  |
53119 | Plate Round 1 x 1 Swirled Top / Poo | 2 | 102 |
| 723 (-6) |  |
32557 | Technic Pin Connector Perpendicular Long | 2 | 102 |
| 724 (-38) |  |
4528 | Equipment Frying Pan | 4 | 102 |
| 725 (-42) |  |
2926 | Plate Special 1 x 4 with Wheels Holder | 2 | 102 |
| 726 (+317) |  |
49311 | Brick 1 x 4 x 3 | 8 | 102 |
| 727 (+7) |  |
33172 | Plant, Carrot | 4 | 102 |
| 728 (-193) |  |
74261 | Large Figure Skeletal, Joint Extender [High Friction] | 1 | 101 |
| 729 (-1) |  |
32250 | Technic Beam 3 x 5 L-Shape with Quarter Ellipse Thin | 7 | 101 |
| 730 (+41) |  |
89201 | Tyre 24 x 14 Shallow Tread (Tread Small Hub), Band Around Center of Tread | 1 | 101 |
| 731 (+5) |  |
3940b | Support 2 x 2 x 2 Stand with Reinforced Underside | 3 | 101 |
| 732 (-48) |  |
4533 | Cupboard 2 x 3 x 2 Door | 4 | 100 |
| 733 (-67) |  |
2852 | Technic Engine Connecting Rod | 1 | 100 |
| 734 (+53) |  |
43056 | Hinge Plate 2 x 4 with Pin Hole with 2 Holes – Bottom | 4 | 100 |
| 735 (+197) |  |
36017 | Weapon Sword Hilt with Dragon Head | 3 | 99 |
| 736 (-46) |  |
4536 | Cupboard 2 x 3 Drawer | 5 | 98 |
| 737 (-78) |  |
57697 | Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin | 1 | 98 |
| 738 (-34) |  |
57585 | Technic Axle Connector Hub with 3 Axles at 120┬░ | 1 | 98 |
| 739 (-18) |  |
6222 | Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole | 5 | 98 |
| 740 (+38) |  |
62361 | Wheel Arch, Mudguard, 1 1/2 x 6 x 1 [Arch Extended] | 14 | 98 |
| 741 (-31) |  |
32249 | Technic Beam 3 x 3 L-Shape with Quarter Ellipse Thin | 5 | 97 |
| 742 (-96) |  |
65098 | Technic Pin Double with Axle Hole | 2 | 97 |
| 743 (-65) |  |
2851 | Technic Engine Piston Round | 1 | 97 |
| 744 (-47) |  |
13349 | Wedge Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs] | 7 | 97 |
| 745 (-14) |  |
54662 | Hinge Cylinder 1 x 3 Locking with 1 Finger and 2 Fingers On Ends, with Hole | 3 | 97 |
| 746 (-66) |  |
11954 | Technic Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface | 7 | 96 |
| 747 (+117) |  |
24593 | Cylinder Half 2 x 4 x 2 with 1 x 2 Cutout | 9 | 96 |
| 748 (-30) |  |
63082 | Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center | 2 | 95 |
| 749 (-35) |  |
61072 | Plate Special 1 x 4 with Angled Tubes | 3 | 95 |
| 750 (+174) |  |
93604 | Slope Curved 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs | 16 | 95 |
| 751 (+74) |  |
87617 | Cylinder 1 x 5 1/2 with Handle (Friction Cylinder) | 4 | 95 |
| 752 (+512) |  |
42918 | Slope Curved 8 x 2 No Studs | 8 | 95 |
| 753 (-20) |  |
47759 | Wedge Sloped 45┬░ 2 x 4 Triple | 8 | 94 |
| 754 (-13) |  |
47755 | Wheel Arch, Wedge 4 x 3 Open with Cutout and Four Studs | 12 | 94 |
| 755 (+10) |  |
4739 | Treasure Chest Lid [Thick Hinge] | 7 | 94 |
| 756 (-32) |  |
93593 | Wheel 11 x 6 with 8 Spokes | 4 | 94 |
| 757 (-8) |  |
27965 | Zipline, 22L with 2 Connectors – Flexible | 6 | 93 |
| 758 — |  |
54671 | Hinge Brick 1 x 2 Locking with 2 Fingers Vertical End, 9 Teeth | 3 | 93 |
| 759 (+215) |  |
41948 | Plate 8 x 8 with Half Circle | 14 | 93 |
| 760 (+236) |  |
66909 | Weapon Hilt Symmetric | 4 | 92 |
| 761 (+57) |  |
32065 | Technic Beam 1 x 7 Thin | 6 | 92 |
| 762 (-40) |  |
6190 | Bar 1 x 3 (Radio Handle, Phone Handset) | 5 | 91 |
| 763 (+126) |  |
x346 | Technic Tooth 1 x 3 with Axle Hole [Hollow Underside] | 9 | 91 |
| 764 (-1) |  |
41748 | Wedge Curved 6 x 2 Left | 14 | 90 |
| 765 (-17) |  |
95188 | Brick Round Corner 6 x 6 with 33┬░ Slope and Facet Cutout | 11 | 90 |
| 766 (-74) |  |
18974 | Wheel Arch, Mudguard 4 x 2 1/2 x 2 1/3 | 10 | 90 |
| 767 (-14) |  |
41747 | Wedge Curved 6 x 2 Right | 14 | 90 |
| 768 (+1) |  |
47753 | Wedge Curved 4 x 4 No Top Studs | 11 | 90 |
| 769 (+346) |  |
65617 | Brick Round Corner 3 x 3 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | 9 | 89 |
| 770 (-28) |  |
3837 | Equipment Shovel [Round Stem End] | 4 | 89 |
| 771 (-24) |  |
40378 | Animal Body Part / Plant, Tail / Neck / Branch / Trunk, Middle Section with Pin | 11 | 89 |
| 772 (-29) |  |
3956 | Bracket 2 x 2 – 2 x 2 | 2 | 89 |
| 773 (-66) |  |
64448 | Support 1 x 6 x 5 Girder Rectangular | 7 | 89 |
| 774 (-54) |  |
6239 | Tail Shuttle | 15 | 88 |
| 775 (+41) |  |
49283 | Wire Clip with Axle Hole | 8 | 88 |
| 776 (-20) |  |
6249 | Brick Special 2 x 4 with Pins | 2 | 88 |
| 777 (-31) |  |
4738a | Treasure Chest Bottom with Rear Slots | 6 | 88 |
| 778 (-10) |  |
87408 | Technic Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes | 1 | 87 |
| 779 (-6) |  |
55976 | Tyre 56 x 26 Balloon | 1 | 87 |
| 780 (-93) |  |
87407 | Technic Gear 20 Tooth Bevel with Pin Hole | 1 | 87 |
| 781 (+78) |  |
38583 | Brick Special Arch 1 x 2 Jumper | 3 | 87 |
| 782 (-139) |  |
30385 | Rock 1 x 1 Crystal 5 Point | 9 | 86 |
| 783 (+15) |  |
95228 | Equipment Bottle | 3 | 86 |
| 784 (+7) |  |
15279 | Plant, Grass Stem with Bar Hole [3.2mm] | 5 | 85 |
| 785 (-28) |  |
95199 | Weapon Gun / Pistol Two Barrel | 3 | 85 |
| 786 (+19) |  |
18759 | Slope Inverted 45┬░ 3 x 1 Double with 2 Blocked Open Studs | 5 | 85 |
| 787 (-37) |  |
6183 | Brick Arch 1 x 6 x 2 Curved Top | 9 | 85 |
| 788 (+36) |  |
2815 | Technic Wedge Belt Wheel Tire | 3 | 84 |
| 789 (+33) |  |
3852b | Equipment Hairbrush Short Handle [10mm] | 3 | 84 |
| 790 (-9) |  |
4176 | Windscreen 2 x 6 x 2 | 4 | 84 |
| 791 (-65) |  |
3464 | Wheel Centre Small with Stub Axles (Pulley Wheel) | 2 | 83 |
| 792 (+59) |  |
44126 | Brick Curved 6 x 2 | 6 | 83 |
| 793 (-34) |  |
18920 | Equipment Scissors | 1 | 83 |
| 794 (+41) |  |
44674 | Mudguard 2 x 4 with Molded Headlights | 14 | 82 |
| 795 (-35) |  |
30151b | Brick Round 2 x 2 x 1 2/3 Dome Top [Blocked Open Stud] | 3 | 82 |
| 796 (-45) |  |
87080 | Technic Panel Fairing # 1 Small Smooth Short, Side A | 13 | 82 |
| 797 (-12) |  |
32017 | Technic Beam 1 x 5 Thin | 4 | 82 |
| 798 (-113) |  |
56891 | Tyre 37 x 18 R Balloon | 1 | 82 |
| 799 (-15) |  |
19121 | Fence Ornamented 1 x 4 x 2 with 4 Studs | 7 | 81 |
| 800 (+30) |  |
3823 | Windscreen 2 x 4 x 2 | 3 | 81 |
| 801 (+3) |  |
6583 | Plate Special 1 x 6 with Train Wagon End Fence | 5 | 81 |
| 802 (-30) |  |
3822 | Door 1 x 3 x 1 Left | 10 | 81 |
| 803 (-94) |  |
88704 | Equipment Whip – Bent | 4 | 81 |
| 804 (-104) |  |
3456 | Plate 6 x 14 | 6 | 81 |
| 805 (+3) |  |
44225 | Technic Rotation Joint Disk with Pin and 3L Beam Thick | 1 | 80 |
| 806 (+94) |  |
36451a | Infinity Stone | 6 | 80 |
| 807 (-62) |  |
55236 | Plant / Creature Body Part, Vine / Tail / Tentacle / Bionicle Spine, Spiky | 3 | 80 |
| 808 (+145) |  |
33492 | Cone 1 1/2 x 1 1/2 x 2/3 | 3 | 80 |
| 809 (+18) |  |
50949 | Grille with 1 x 2 Plate, Racers Car | 4 | 80 |
| 810 (-22) |  |
3821 | Door 1 x 3 x 1 Right | 10 | 79 |
| 811 (+23) |  |
33051 | Plant, Apple | 4 | 79 |
| 812 (-37) |  |
85543 | Rubber Belt Small [15mm ID] [Round Cross Section] | 1 | 79 |
| 813 (-16) |  |
43712 | Wedge Curved 6 x 4 Triple | 12 | 79 |
| 814 (-24) |  |
18945 | Technic Panel 5 x 11 x 1 Tapered | 11 | 78 |
| 815 (-39) |  |
92585 | Tool Crowbar | 4 | 78 |
| 816 (+36) |  |
12885 | Equipment Paint Roller Brush Handle Edge On Handle | 2 | 78 |
| 817 (-40) |  |
15413 | Tyre 49.53 x 20 | 1 | 78 |
| 818 (-36) |  |
87421 | Panel 3 x 3 x 6 Corner Wall without Bottom Indentations | 8 | 78 |
| 819 (+120) |  |
24599 | Brick Round Corner 5 x 5 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch] | 12 | 78 |
| 820 — |  |
44224 | Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick | 1 | 78 |
| 821 (+473) |  |
3228 | Vehicle Track, Train, Plain Rail Straight (no slots, no notches on end) | 2 | 77 |
| 822 (+56) |  |
4522 | Tool Hammer / Mallet Large | 1 | 77 |
| 823 (-61) |  |
21229 | Fence Spindled 4 x 4 x 2 Quarter Round with 3 Studs | 10 | 77 |
| 824 (-30) |  |
30395 | Hook with Towball | 1 | 77 |
| 825 (+18) |  |
3185 | Fence 1 x 4 x 2 | 4 | 76 |
| 826 (+2) |  |
23405 | Panel 1 x 6 x 5 [Vertical Corrugated] | 11 | 76 |
| 827 (+2) |  |
14181 | Wedge Plate 4 x 9 with Stud Notches | 7 | 76 |
| 828 (-42) |  |
2415 | Wheel Holder 2 x 2 Thin with Clips, Plane Single | 1 | 76 |
| 829 (-17) |  |
50337 | Hinge Plate 3 x 4 Locking Dual 2 Finger | 4 | 76 |
| 830 (+2) |  |
15362 | Large Figure Limb Cover / Claw / Spike Large with Axle Hole | 11 | 75 |
| 831 (-51) |  |
87086 | Technic Panel Fairing # 2 Small Smooth Short, Side B | 13 | 75 |
| 832 (-194) |  |
32187 | Technic Driving Ring Extension | 3 | 75 |
| 833 (-78) |  |
14682 | Exhaust Pipe with Technic Pin – Flat End, Rounded Hole | 2 | 74 |
| 834 (+115) |  |
24093 | Book Cover [Plain] | 6 | 74 |
| 835 (+125) |  |
66789 | Plate Round Corners 6 x 6 x 2/3 Circle with Reduced Knobs | 10 | 73 |
| 836 (-75) |  |
41531 | Technic Cylinder 4 x 4 with Pin Holes and Centre Bar | 7 | 73 |
| 837 (+4) |  |
88393 | Brick Special 1 x 2 x 5 with Groove | 4 | 73 |
| 838 (+9) |  |
30093 | Plant, Sea Grass | 4 | 73 |
| 839 (-107) |  |
18975 | Brick Special 2 x 4 x 1 1/3 with Holes and 2 x 2 Cutout | 2 | 72 |
| 840 (+61) |  |
93595 | Wheel 11 x 6 with 8 ‘Y’ Spokes [Plain] | 1 | 72 |
| 841 (-35) |  |
54661 | Hinge Brick 1 x 4 Locking with 1 Finger Vertical End and 2 Fingers Vertical End | 7 | 72 |
| 842 (-113) |  |
57520 | Technic Tread Sprocket Wheel Small | 3 | 72 |
| 843 (-34) |  |
98137 | Weapon Sword, Big Blade | 6 | 72 |
| 844 (-74) |  |
4083 | Bar 1 x 4 x 2 with Studs | 4 | 72 |
| 845 (-12) |  |
32529 | Technic Pin Connector Plate with One Hole (Single on Bottom) | 1 | 72 |
| 846 (-44) |  |
24947 | Brick Round 2 x 2 x 1 1/3 Inverted | 6 | 71 |
| 847 (+8) |  |
2486 | Bar 1 x 8 x 2 | 4 | 71 |
| 848 (+27) |  |
54672 | Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End, 9 Teeth | 4 | 70 |
| 849 (-53) |  |
18944 | Technic Panel Curved 3 x 13 | 10 | 70 |
| 850 (-86) |  |
15745 | Rock – Heart Jewel with Shaft | 2 | 70 |
| 851 (-3) |  |
6565 | Wedge 3 x 2 Left | 7 | 70 |
| 852 (-35) |  |
32198 | Technic Gear 20 Tooth Bevel | 2 | 70 |
| 853 (+501) |  |
68568 | Plate Round Corner 3 x 3 with 2 x 2 Round Cutout | 8 | 70 |
| 854 (-44) |  |
95343 | Bucket 1 x 1 x 1 | 3 | 70 |
| 855 (-55) |  |
24946 | Food Egg with 1.5mm Hole [Plain] | 6 | 70 |
| 856 (-18) |  |
6192 | Brick Curved 2 x 4 No Studs, Curved Top | 8 | 70 |
| 857 (+6) |  |
18910 | Hinge Panel 3 x 4 x 3 Curved | 3 | 70 |
| 858 (-18) |  |
20309 | Window 1 x 4 x 1 2/3 with Spoked Rounded Top | 6 | 69 |
| 859 (-52) |  |
92107 | Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders] | 7 | 69 |
| 860 (-46) |  |
62531 | Technic Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface | 10 | 69 |
| 861 (+142) |  |
56904 | Wheel 30 x 14 | 4 | 69 |
| 862 (-88) |  |
2340 | Tail 4 x 1 x 3 | 8 | 69 |
| 863 (-158) |  |
22391 | Wedge Sloped 4 x 4 Pointed | 7 | 69 |
| 864 (-33) |  |
18892 | Brick Special 2 x 4 with Wheels Holder, Single Slit with 2 x 2 Cutout | 1 | 69 |
| 865 (-46) |  |
14137 | Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside | 6 | 69 |
| 866 (+16) |  |
3043 | Slope 45┬░ 2 x 2 Double | 4 | 68 |
| 867 (-13) |  |
6564 | Wedge 3 x 2 Right | 7 | 68 |
| 868 (+187) |  |
35789 | Wheel Arch, Mudguard 2 x 4 x 2 | 10 | 67 |
| 869 — |  |
24324 | Book Binding with Two Studs | 7 | 67 |
| 870 (-59) |  |
61800 | Large Figure Wing, Small | 7 | 67 |
| 871 (+6) |  |
4151 | Plate Special 8 x 8 with Grille [Undetermined Center] | 3 | 67 |
| 872 (-142) |  |
55615 | Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part) | 1 | 67 |
| 873 (+18) |  |
90370 | Musical Instrument Microphone [Plain] | 3 | 67 |
| 874 (-16) |  |
87585 | Equipment Oar / Paddle [Reinforced] | 3 | 66 |
| 875 (-248) |  |
93571 | Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | 3 | 66 |
| 876 (+42) |  |
62360 | Windscreen 3 x 6 x 1 Curved with Rectangular Stud Holder in Bottom | 16 | 66 |
| 877 (-64) |  |
64683 | Technic Panel Fairing # 3 Small Smooth Long, Side A | 11 | 66 |
| 878 (-6) |  |
60614 | Door 1 x 2 x 3 with Vertical Handle, New Mold for Tabless Frames | 4 | 66 |
| 879 (+18) |  |
10187 | Weapon Bladed Claw Spread | 4 | 65 |
| 880 (-31) |  |
74698 | Tile Round 2 x 2 – Thick Lifting Ring | 1 | 65 |
| 881 (+11) |  |
25386 | Food Hot Dog Bun | 2 | 65 |
| 882 (-22) |  |
27257 | Weapon Pike / Spear Tip | 4 | 65 |
| 883 (+223) |  |
35442 | Plate Special 2 x 2 Splat Gear with 6 Teeth | 4 | 65 |
| 884 (+257) |  |
51270 | Plant, Pumpkin | 3 | 65 |
| 885 (+30) |  |
76537 | Technic Shock Absorber 6.5L with Hard Spring [Complete Assembly] | 2 | 65 |
| 886 (-60) |  |
64391 | Technic Panel Fairing # 4 Small Smooth Long, Side B | 11 | 65 |
| 887 (-37) |  |
92842 | Propeller 3 Blades 5 Diameter | 1 | 65 |
| 888 (+21) |  |
6154 | Door Frame 1 x 4 x 4 (Lift) | 4 | 64 |
| 889 (-21) |  |
44809 | Technic Pin Connector Perpendicular 2 x 2 Bent | 4 | 64 |
| 890 (+126) |  |
29109 | Weapon Sword / Machete | 3 | 64 |
| 891 (-70) |  |
18838 | Brick Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports | 8 | 64 |
| 892 (+63) |  |
15460 | Technic Steering Gear with 3 Ball Joints, Compact | 1 | 64 |
| 893 (+90) |  |
39794 | Technic Beam Frame 7 x 11 | 4 | 63 |
| 894 (-4) |  |
29111 | Insect, Spider with Elongated Tail Section | 5 | 63 |
| 895 (-92) |  |
48933 | Wedge Sloped 4 x 4 Triple, Stud Notches | 11 | 63 |
| 896 (-30) |  |
62743 | Plate Special 2 x 16 with Angled Side Extensions and Hole (Rotor Blade) | 2 | 63 |
| 897 (+226) |  |
39613 | Plate Angled 3 x 3 with Heart Shape | 3 | 62 |
| 898 (+18) |  |
28974 | Minifig Neckwear Bracket [One Stud] – Reinforced | 6 | 62 |
| 899 (+86) |  |
6124 | Equipment Magic Wand | 2 | 62 |
| 900 (-105) |  |
92220 | Large Figure Weapon Claw, with Clip | 4 | 61 |
| 901 (-21) |  |
14226c11 | String with End Studs 11L Overall | 1 | 61 |
| 902 (-21) |  |
60599 | Door Frame 2 x 4 x 6 | 6 | 61 |
| 903 (+92) |  |
28327 | Door Frame 4 x 4 x 6 Corner | 5 | 61 |
| 904 (+7) |  |
35654 | Grille Bar 1 x 4 x 1 2/3 BullBar | 1 | 61 |
| 905 (-22) |  |
6256 | Equipment Dish / Plate / Bowl 3 x 3 [Plain] | 7 | 60 |
| 906 (-61) |  |
4727 | Plant, Flower 2 x 2 Leaves – Angular | 1 | 60 |
| 907 (+462) |  |
18034 | Weapon Sword with Thick Crossguard (Roman Gladius) | 4 | 60 |
| 908 (+84) |  |
60808 | Panel 1 x 4 x 5 with Arched Window | 9 | 60 |
| 909 (-47) |  |
15540 | Helicopter Landing Ski 1 x 6 with Pin Hole | 4 | 59 |
| 910 (+31) |  |
64951 | Barrel Half Large with Axle Hole | 6 | 59 |
| 911 (+61) |  |
51239 | Window Frame 1 x 3 x 3 | 3 | 58 |
| 912 (+310) |  |
49577 | Animal / Plant, Coral / Sea Weed | 3 | 58 |
| 913 (-29) |  |
3300 | Slope 33┬░ 2 x 2 Double | 4 | 58 |
| 914 (-26) |  |
6148 | Plant, Palm Leaf Small | 3 | 58 |
| 915 (-79) |  |
15064 | Insect Body Part, Leg / Tail / Tentacle / Claw | 6 | 58 |
| 916 (-127) |  |
18588 | Launcher, Weapon Rapid Shooter Six Barrel | 5 | 58 |
| 917 (-124) |  |
18587 | Launcher Trigger, Weapon Rapid Shooter | 2 | 58 |
| 918 (-117) |  |
39893 | Hinge Brick 1 x 2 Locking with 1 Finger Vertical End and 2 Fingers Vertical End, 9 Teeth | 5 | 57 |
| 919 (+383) |  |
40066 | Panel 1 x 6 x 7 with 2 Columns and Arch | 10 | 57 |
| 920 (+14) |  |
41862 | Plate Special 2 x 2 with Grills | 1 | 57 |
| 921 (-27) |  |
32200 | Axle Hose, Soft 12L | 9 | 57 |
| 922 (+79) |  |
45301 | Wedge Curved 16 x 4 Triple | 8 | 56 |
| 923 (-100) |  |
53400 | Vehicle Track, Train, Plastic (RC Trains) Curved | 1 | 56 |
| 924 (+76) |  |
35470 | Plate Special 3 x 5 Cloud with 3 Center Studs | 2 | 56 |
| 925 (+46) |  |
51266 | Glass For Frame 1 x 3 x 3 | 1 | 56 |
| 926 (-84) |  |
3900 | Equipment Signal Paddle | 2 | 56 |
| 927 (+30) |  |
28588 | Animal, Snake Head with Open Mouth, Fangs and Curved Neck with Bar | 4 | 55 |
| 928 (-54) |  |
2714b | Bar 8L – Two Stop Rings / One Pin, Technic Figure Ski Pole [Flat End] | 3 | 55 |
| 929 (+263) |  |
61408 | Technic Beam 3 x 0.5 Liftarm with Boss and Blocked, Squared Pin Hole | 3 | 55 |
| 930 (+12) |  |
3943 | Cone 4 x 4 x 2 with Axle Hole [Plain] | 7 | 55 |
| 931 (+13) |  |
4489 | Wheel Wagon Large (33mm D.), hole notched for wheels holder pin | 4 | 55 |
| 932 (+118) |  |
64847 | Animal Body Part, Horn (Cattle) | 3 | 55 |
| 933 (-16) |  |
26597 | Brick Special 1 x 2 with Vertical Closed Handle Inset from Edge | 3 | 55 |
| 934 (-32) |  |
67737 | Propeller 4 Blade 5 Diameter with Rounded Ends, Open Hub | 1 | 55 |
| 935 (+47) |  |
50956 | Wedge Curved 10 x 3 Right | 12 | 55 |
| 936 (+45) |  |
50955 | Wedge Curved 10 x 3 Left | 13 | 54 |
| 937 (+14) |  |
24869 | Wheel Roller Coaster | 1 | 54 |
| 938 (+9061) |  |
72869 | Bar Holder with Clip and 90┬░ Angle (Mechanical Leg) | 3 | 54 |
| 939 (+279) |  |
11010 | Minifig Ring 1 x 1 | 1 | 54 |
| 940 (-87) |  |
93789 | Weapon Pike / Spear Flat End | 5 | 54 |
| 941 (-85) |  |
11399 | Plate Special 4 x 4 with Clips Horizontal (thick open O clips) | 5 | 54 |
| 942 (+574) |  |
67810 | Brick Curved 2 x 2 x 1 1/3 with Curved Top – Corner | 6 | 53 |
| 943 (-15) |  |
23949 | Slope 45┬░ 2 x 6 | 6 | 53 |
| 944 (+210) |  |
35443 | Plate Special 4 x 4 Splat Gear with 10 Teeth | 4 | 53 |
| 945 (+554) |  |
15469 | Plate Round 2 x 2 x 2/3 with + Axle Hole and 4 Leaf Extensions | 5 | 53 |
| 946 (-73) |  |
2854 | Technic Engine Crankshaft Center | 1 | 53 |
| 947 (+39) |  |
37341c | Weapon Sword Blade with Bar, Square Crossguard | 5 | 52 |
| 948 (-17) |  |
3836 | Equipment Brush / Pushbroom | 1 | 52 |
| 949 (+50) |  |
2819 | Technic Steering Wheel Small (3 Studs Diameter) | 3 | 52 |
| 950 (+58) |  |
23986 | Equipment Teapot | 2 | 52 |
| 951 (-84) |  |
44300 | Hinge Tile 1 x 3 Locking with 1 Finger on Top | 3 | 52 |
| 952 (+36) |  |
37341d | Weapon Scythe / Hook with Bar | 5 | 52 |
| 953 (-32) |  |
13269 | Wedge Sloped 45┬░ 6 x 4 Double / 33┬░ [Train Roof] | 9 | 52 |
| 954 (+24) |  |
37341b | Weapon Dagger / Knife with Flat Hilt End and Curved Blade, Cross Hatched Grip | 5 | 52 |
| 955 (+29) |  |
37341a | Weapon Sword Curved Blade with Bar | 5 | 52 |
| 956 (-21) |  |
4161 | Slope 33┬░ 3 x 3 | 2 | 52 |
| 957 (+295) |  |
65426 | Wedge Plate 2 x 4 27┬░ Right | 6 | 52 |
| 958 (+288) |  |
65429 | Wedge Plate 2 x 4 27┬░ Left | 6 | 52 |
| 959 (+31) |  |
37341e | Weapon Scythe / Hook with Double Blades | 5 | 52 |
| 960 (-30) |  |
19159 | Technic Pin Double Triangle 1 x 3 with 2 Clips Not Completely Round Pin Holes | 1 | 51 |
| 961 (+43) |  |
33121 | Animal, Crab | 5 | 51 |
| 962 (+13) |  |
13608 | Weapon Gun Ray / Sci Fi – Rounded Heat Diffusers | 3 | 51 |
| 963 (-78) |  |
2530 | Weapon Sword / Cutlass | 3 | 51 |
| 964 (-99) |  |
92589 | Door Grill 1 x 4 x 6 | 2 | 51 |
| 965 (-55) |  |
60621 | Door 1 x 4 x 6 Barred with Stud Handle | 2 | 51 |
| 966 (-58) |  |
55978 | Tyre 37 x 22 ZR | 1 | 50 |
| 967 (+192) |  |
34173 | Equipment Cutlery – Spoon | 1 | 50 |
| 968 (-22) |  |
33322 | Headwear Accessory Crown / Tiara | 3 | 50 |
| 969 (-36) |  |
99009 | Technic Turntable Small Top | 1 | 50 |
| 970 (-50) |  |
64178 | Technic Beam 5 x 11 Open Center Frame Thick | 1 | 50 |
| 971 (+718) |  |
67095 | Tile Round 3 x 3 | 7 | 50 |
| 972 (-27) |  |
30592 | Brick Special 2 x 2 with Top Pin and 1 x 2 Side Plates | 3 | 50 |
| 973 (+9026) |  |
78594 | Panel 2 x 2 x 5 Corner | 1 | 50 |
| 974 (+20) |  |
4515 | Slope 10┬░ 6 x 8 | 7 | 50 |
| 975 (+229) |  |
35700 | Container Box 2 x 2 x 1 [Plain] | 3 | 49 |
| 976 (-69) |  |
86208 | Weapon Gun / Torch (Space) [No Grooves] | 2 | 49 |
| 977 (-58) |  |
6070 | Windscreen 5 x 2 x 1 2/3 | 9 | 49 |
| 978 (-107) |  |
64728 | Equipment Dynamite Sticks | 1 | 49 |
| 979 (+113) |  |
90397 | Sports Surfboard Standard | 6 | 49 |
| 980 (-26) |  |
46667 | Jet Engine Fan with 10 Blades and Technic Pin | 4 | 48 |
| 981 (+65) |  |
87693 | Headwear Accessory Plume / Feather Small with Pin | 3 | 48 |
| 982 (+20) |  |
57515 | Technic, Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered | 1 | 48 |
| 983 (-20) |  |
24504 | Minifig Neckwear Ninja Face Scarf | 7 | 48 |
| 984 (-34) |  |
57783 | Windscreen 3 x 4 x 1 1/3 Large Glass Surface | 2 | 48 |
| 985 (-90) |  |
40243 | Stairs Spiral Step | 4 | 48 |
| 986 (-60) |  |
30043 | Plate Special 1 x 4 with Arm Down | 2 | 48 |
| 987 (-83) |  |
57878 | Train Wheel RC Train | 1 | 48 |
| 988 (-89) |  |
18978a | Wheel Cover 5 Spoke – for Wheel 18976 | 3 | 48 |
| 989 (-84) |  |
18978b | Wheel Cover 10 Spoke – for Wheel 18976 | 3 | 48 |
| 990 (+425) |  |
90202 | Technic Pin Connector Round with 4 Clips | 2 | 48 |
| 991 (-44) |  |
99010 | Technic Turntable Small Base (28 Teeth) | 1 | 48 |
| 992 (-86) |  |
219 | Vehicle Track, Train, Connection/Stacking Pin 4 Stud long for Track Storage | 1 | 48 |
| 993 (+12) |  |
28220 | Large Figure Armor Plate, Small | 6 | 48 |
| 994 (-21) |  |
30132 | Weapon Gun / Pistol / Revolver Large Barrel [Old Style] | 2 | 48 |
| 995 (-134) |  |
53454 | Weapon Axe Head, Clip-on (Viking) [Thick Clip] | 4 | 48 |
| 996 (-19) |  |
98549 | Tile Special 2 x 2 with Bar and Stud with Stop Ring | 2 | 48 |
| 997 (-101) |  |
30134 | Stairs 7 x 4 x 6 Straight Open | 4 | 48 |
| 998 (+30) |  |
32498 | Technic Gear 36 Tooth Double Bevel | 1 | 48 |
| 999 (+140) |  |
27262 | Windscreen 6 x 4 x 1 Hexagonal with Handle | 10 | 48 |
| 1000 (+224) |  |
98369 | Equipment Cleaver, no Holes | 4 | 47 |
| 1001 (+181) |  |
30987 | Cylinder Quarter 2 x 2 x 5 (Wall) | 9 | 47 |
| 1002 (-26) |  |
33303 | Picket Fence 1 x 4 x 2 | 2 | 47 |
| 1003 (+109) |  |
15445 | Weapon Gun Automatic Pistol with Top Clip | 2 | 47 |
| 1004 (-134) |  |
30361 | Brick Round 2 x 2 x 2 Robot Body – without Bottom Axle Holder | 7 | 47 |
| 1005 (+8994) |  |
78256 | Plate Special 1 x 2 with Clip Vertical on End | 2 | 47 |