← For the latest data, visit brickarchitect.com/most-common-lego-parts.
Top 600 Most Common LEGO Parts 2016-2020 (data from September 2020)
This table is based on sets released in 2016-2020. Year-over-year comparisons are between 2016-2020 and 2015-2019.
This is not a final reflection of sets released 2016-2020, since many sets from 2020 have not been inventoried by now.
1 (+2) | ![]() |
4073 | 1×1 Plate, Round | 47 | 32688 |
2 (-1) | ![]() |
3023 | 1×2 Plate | 48 | 32310 |
3 (-1) | ![]() |
3024 | 1×1 Plate | 46 | 29625 |
4 — | ![]() |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 21013 |
5 (+10) | ![]() |
98138 | 1×1 Tile, Round | 49 | 14179 |
6 — | ![]() |
3069b | 1×2 Tile | 46 | 13442 |
7 — | ![]() |
3004 | 1×2 Brick | 39 | 13032 |
8 (-3) | ![]() |
54200 | 1×1 Slope 30° (Cheese) | 50 | 12950 |
9 (-1) | ![]() |
3710 | 1×4 Plate | 34 | 12509 |
10 (-1) | ![]() |
3005 | 1×1 Brick | 48 | 11375 |
11 (-1) | ![]() |
3020 | 2×4 Plate | 38 | 10811 |
12 (-1) | ![]() |
3022 | 2×2 Plate | 32 | 10660 |
13 — | ![]() |
6558 | Technic Pin Long with Friction Ridges Lengthwise | 1 | 9201 |
14 — | ![]() |
15573 | 1×2 Jumper | 32 | 8918 |
15 (-3) | ![]() |
2412b | 1×2 Tile, Grille | 25 | 8547 |
16 (+1) | ![]() |
3070b | 1×1 Tile | 44 | 8461 |
17 (-1) | ![]() |
3021 | 2×3 Plate | 27 | 7761 |
18 (+1) | ![]() |
3623 | 1×3 Plate | 33 | 7222 |
19 (-1) | ![]() |
3666 | 1×6 Plate | 32 | 7110 |
20 — | ![]() |
11477 | 2×1 Curved | 39 | 6770 |
21 — | ![]() |
3003 | 2×2 Brick | 29 | 6705 |
22 (+4) | ![]() |
3001 | 2×4 Brick | 30 | 6604 |
23 (-1) | ![]() |
2431 | 1×4 Tile | 39 | 6511 |
24 — | ![]() |
4274 | Technic Pin 1/2 | 2 | 6483 |
25 — | ![]() |
3010 | 1×4 Brick | 35 | 6457 |
26 (-3) | ![]() |
85984 | 1×2 Slope 30° (Double Cheese) | 33 | 6421 |
27 (+1) | ![]() |
2420 | 2×2 Plate, Corner | 23 | 6054 |
28 (-1) | ![]() |
3062b | Brick Round 1 x 1 Open Stud | 34 | 5896 |
29 — | ![]() |
15068 | 2×2 Curved | 37 | 5594 |
30 (+2) | ![]() |
87580 | 2×2 Jumper | 35 | 5171 |
31 (-1) | ![]() |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 5158 |
32 (-1) | ![]() |
3795 | 2×6 Plate | 28 | 5096 |
33 — | ![]() |
3068b | 2×2 Tile | 36 | 5052 |
34 (+7) | ![]() |
85861 | 1×1 Plate, Round w/ hole | 18 | 5001 |
35 (-1) | ![]() |
87079 | 2×4 Tile | 36 | 4945 |
36 (+52) | ![]() |
25269 | Tile Round 1 x 1 Quarter | 34 | 4567 |
37 — | ![]() |
4032 | 2×2 Plate, Round w/ Axle | 22 | 4539 |
38 (-3) | ![]() |
3040 | 2×1 Slope 45° | 35 | 4405 |
39 (-3) | ![]() |
6636 | 1×6 Tile | 28 | 4364 |
40 (-1) | ![]() |
15712 | 1×1 Clip, Top | 15 | 4151 |
41 (-3) | ![]() |
87087 | 1×1 Brick, Stud 1-side | 28 | 4088 |
42 — | ![]() |
3622 | 1×3 Brick | 29 | 4025 |
43 (-3) | ![]() |
32062 | Technic Axle 2 Notched | 2 | 3777 |
44 (+3) | ![]() |
3009 | 1×6 Brick | 29 | 3646 |
45 — | ![]() |
4070 | 1×1 Brick, Headlight | 18 | 3635 |
46 (-3) | ![]() |
4589 | 1×1 Cone | 32 | 3606 |
47 (+1) | ![]() |
99780 | 1×2 Bracket, Inverted | 17 | 3528 |
48 (-2) | ![]() |
3941 | 2×2 Brick, Round w/ Axle | 32 | 3516 |
49 (+1) | ![]() |
3460 | 1×8 Plate | 28 | 3502 |
50 (+1) | ![]() |
63864 | 1×3 Tile | 28 | 3358 |
51 (+30) | ![]() |
24866 | Plant, Flower 1 x 1 | 17 | 3349 |
52 (+1) | ![]() |
32028 | 1×2 Plate w/ Door Rail | 18 | 3315 |
53 (-4) | ![]() |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 2 | 3210 |
54 (-2) | ![]() |
99207 | 2×2 Bracket, Inverted | 13 | 3103 |
55 (+2) | ![]() |
11211 | 1×2 Brick, 2 Studs 1-side | 15 | 2964 |
56 (-1) | ![]() |
4085 | Plate Special 1 x 1 with Clip Vertical [Thin Open O Clip] | 14 | 2918 |
57 (-1) | ![]() |
6091 | 1×2×1⅔ Curved | 31 | 2890 |
58 — | ![]() |
4162 | 1×8 Tile | 24 | 2843 |
59 (+4) | ![]() |
2357 | 2×2 Brick, Corner | 21 | 2828 |
60 (-6) | ![]() |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush | 7 | 2807 |
61 (+16) | ![]() |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 9 | 2720 |
62 (+2) | ![]() |
3034 | 2×8 Plate | 28 | 2713 |
63 (+2) | ![]() |
3660 | 2×2 Slope 45°, Inverted | 29 | 2709 |
64 (-2) | ![]() |
44728 | 2×2 Bracket | 17 | 2669 |
65 (-5) | ![]() |
2654 | 2×2 Round, Boat Stud | 25 | 2611 |
66 (-7) | ![]() |
3039 | 2×2 Slope 45° | 30 | 2597 |
67 (-6) | ![]() |
3700 | 1×2 Technic Brick, 1 Hole | 17 | 2595 |
68 (-2) | ![]() |
3665 | 2×1 Slope 45°, Inverted | 30 | 2584 |
69 (+1) | ![]() |
41740 | Plate Special 1 x 4 with 2 Studs with New Underside | 26 | 2560 |
70 (-2) | ![]() |
4519 | Technic Axle 3 | 2 | 2491 |
71 (-27) | ![]() |
33291 | 1×1 Plate, Flower (4 Petals) | 15 | 2487 |
72 (-3) | ![]() |
59443 | Technic Axle Connector | 11 | 2464 |
73 — | ![]() |
98283 | 1×2 Brick, Masonry | 9 | 2378 |
74 (-7) | ![]() |
3713 | Technic Bush | 4 | 2368 |
75 (+1) | ![]() |
30136 | 1×2 Brick, Log (Palisade) | 13 | 2347 |
76 (+14) | ![]() |
18654 | Technic Pin Connector Round 1L [Beam] | 12 | 2267 |
77 (+2) | ![]() |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 16 | 2263 |
78 (-6) | ![]() |
60478 | 1×2 Plate w/ Handle, End | 16 | 2206 |
79 (-4) | ![]() |
92280 | 1×2 Plate w/ Clip, Top | 8 | 2186 |
80 (-9) | ![]() |
63868 | 1×2 Plate w/ Clip End, Horizontal | 14 | 2181 |
81 (+4) | ![]() |
2877 | Brick Special 1 x 2 with Grill | 11 | 2178 |
82 (-8) | ![]() |
48336 | 1×2 Plate w/ Handle, Side | 12 | 2174 |
83 (-3) | ![]() |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 21 | 2119 |
84 (+2) | ![]() |
93273 | 4×1 Curved, Double | 29 | 1952 |
85 (-3) | ![]() |
99781 | Bracket 1 x 2 – 1 x 2 | 13 | 1951 |
86 (-8) | ![]() |
32064 | 1×2 Technic Brick, 1 Axle Hole | 14 | 1924 |
87 (+10) | ![]() |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 18 | 1916 |
88 (-1) | ![]() |
3031 | Plate 4 x 4 | 21 | 1892 |
89 (+6) | ![]() |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 1886 |
90 (-7) | ![]() |
50950 | 3×1 Curved | 31 | 1858 |
91 (-2) | ![]() |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick U Clip] | 17 | 1844 |
92 (+1) | ![]() |
4477 | 1×10 Plate | 18 | 1834 |
93 (+32) | ![]() |
20482 | Tile Round 1 x 1 with Hollow Bar | 16 | 1813 |
94 (-2) | ![]() |
6541 | Technic Brick 1 x 1 with Hole | 16 | 1804 |
95 (-4) | ![]() |
3002 | 2×3 Brick | 14 | 1803 |
96 (+2) | ![]() |
6536 | Technic Axle and Pin Connector Perpendicular | 13 | 1731 |
97 (-13) | ![]() |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 17 | 1720 |
98 (+5) | ![]() |
32316 | Technic Beam 1 x 5 Thick | 18 | 1692 |
99 (+10) | ![]() |
87994 | Bar 3L | 11 | 1673 |
100 (-1) | ![]() |
62462 | Technic Pin Connector Round [Slotted] | 18 | 1669 |
101 (-7) | ![]() |
3673 | Technic Pin without Friction Ridges Lengthwise | 1 | 1650 |
102 (-6) | ![]() |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 13 | 1637 |
103 (+2) | ![]() |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 10 | 1631 |
104 (-4) | ![]() |
32523 | Technic Beam 1 x 3 Thick | 18 | 1621 |
105 (-3) | ![]() |
14769 | 2×2 Tile, Round | 28 | 1618 |
106 (-5) | ![]() |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 15 | 1571 |
107 (+15) | ![]() |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 7 | 1558 |
108 — | ![]() |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 6 | 1549 |
109 (+3) | ![]() |
32000 | Technic Brick 1 x 2 [2 Holes] | 9 | 1524 |
110 (-3) | ![]() |
3032 | Plate 4 x 6 | 21 | 1518 |
111 (-5) | ![]() |
32140 | Technic Beam 2 x 4 L-Shape Thick | 13 | 1479 |
112 (+78) | ![]() |
35480 | Plate Special 1 x 2 Rounded with 2 Open Studs | 15 | 1479 |
113 (+27) | ![]() |
24201 | Slope Curved 2 x 1 Inverted | 19 | 1456 |
114 (-4) | ![]() |
32524 | Technic Beam 1 x 7 Thick | 17 | 1445 |
115 (+3) | ![]() |
30374 | Bar 4L (Lightsaber Blade / Wand) | 17 | 1440 |
116 (-1) | ![]() |
4286 | Slope 33┬░ 3 x 1 | 23 | 1439 |
117 — | ![]() |
2456 | 2×6 Brick | 20 | 1377 |
118 (-4) | ![]() |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 10 | 1369 |
119 (+7) | ![]() |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 11 | 1369 |
120 (-7) | ![]() |
4740 | 2×2 Dish | 27 | 1368 |
121 (+65) | ![]() |
99563 | Money / Gold Bar [Ingot] | 12 | 1348 |
122 (+6) | ![]() |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 13 | 1344 |
123 (-4) | ![]() |
32526 | Technic Beam 3 x 5 L-Shape Thick | 17 | 1344 |
124 (-20) | ![]() |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 4 | 1343 |
125 (+2) | ![]() |
4865b | Panel 1 x 2 x 1 [Rounded Corners] | 23 | 1341 |
126 (-10) | ![]() |
3832 | 2×10 Plate | 15 | 1340 |
127 (+6) | ![]() |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 18 | 1333 |
128 (-4) | ![]() |
3008 | 1×8 Brick | 17 | 1325 |
129 (+70) | ![]() |
33909 | Tile Special 2 x 2 with Only 2 studs | 11 | 1312 |
130 (-9) | ![]() |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 24 | 1310 |
131 (+6) | ![]() |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 1305 |
132 (-12) | ![]() |
32013 | Technic Axle and Pin Connector Angled #1 | 13 | 1293 |
133 (+24) | ![]() |
18674 | Tile 2 x 2 Round with Center Stud | 16 | 1292 |
134 (+85) | ![]() |
32952 | Brick Special 1 x 1 x 1 2/3 with Studs on 1 Side | 17 | 1246 |
135 (-12) | ![]() |
3705 | Technic Axle 4 | 2 | 1242 |
136 (+18) | ![]() |
60592 | Window 1 x 2 x 2 Flat Front | 14 | 1241 |
137 (-26) | ![]() |
53451 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small | 12 | 1222 |
138 (+3) | ![]() |
41677 | Technic Beam 1 x 2 Thin | 7 | 1220 |
139 (-1) | ![]() |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 20 | 1217 |
140 (-11) | ![]() |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1216 |
141 (+14) | ![]() |
18677 | Plate Special 1 x 2 with Pin Hole | 6 | 1206 |
142 (-3) | ![]() |
60481 | Slope 65┬░ 2 x 1 x 2 | 27 | 1197 |
143 (+8) | ![]() |
11090 | Bar Holder with Clip | 10 | 1193 |
144 (+67) | ![]() |
27925 | Tile 2 x 2 Curved, Macaroni | 24 | 1163 |
145 (+44) | ![]() |
26047 | Plate 1 x 1 Rounded with Handle | 10 | 1155 |
146 (-15) | ![]() |
3701 | Technic Brick 1 x 4 [3 Holes] | 12 | 1135 |
147 (-13) | ![]() |
32073 | Technic Axle 5 | 2 | 1127 |
148 (-2) | ![]() |
60474 | Plate Round 4 x 4 with Pin Hole | 20 | 1124 |
149 (-13) | ![]() |
4599b | Tap 1 x 1 with Hole in Spout | 9 | 1121 |
150 (-8) | ![]() |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 10 | 1116 |
151 (+53) | ![]() |
26601 | Wedge Plate 2 x 2 Cut Corner | 18 | 1099 |
152 (+50) | ![]() |
26603 | 2×3 Tile | 19 | 1099 |
153 (-9) | ![]() |
64644 | Equipment Telescope | 8 | 1097 |
154 (+38) | ![]() |
60601 | Glass for Window 1 x 2 x 2 Flat | 11 | 1095 |
155 (-3) | ![]() |
60479 | 1×12 Plate | 10 | 1084 |
156 (-11) | ![]() |
40490 | Technic Beam 1 x 9 Thick | 11 | 1073 |
157 (+3) | ![]() |
3937 | Hinge Brick 1 x 2 Base | 12 | 1070 |
158 (-9) | ![]() |
3065 | Brick 1 x 2 without Bottom Tube | 13 | 1062 |
159 (+37) | ![]() |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex | 15 | 1057 |
160 (-17) | ![]() |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly] | 12 | 1057 |
161 (+6) | ![]() |
15535 | Tile 2 x 2 Round with Hole | 11 | 1044 |
162 (-9) | ![]() |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 11 | 1033 |
163 (-28) | ![]() |
87083 | Technic Axle 4 with Stop | 1 | 1029 |
164 — | ![]() |
85080 | Brick Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 25 | 1011 |
165 (+63) | ![]() |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 18 | 1002 |
166 — | ![]() |
63965 | Bar 6L with Stop Ring | 11 | 994 |
167 (-19) | ![]() |
87552 | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 13 | 982 |
168 (-36) | ![]() |
4081b | Plate Special 1 x 1 with Clip Light [Thick Ring] | 12 | 975 |
169 (-22) | ![]() |
32278 | Technic Beam 1 x 15 Thick | 16 | 974 |
170 (-14) | ![]() |
2432 | Tile Special 1 x 2 with Handle | 15 | 965 |
171 (+53) | ![]() |
24246 | Tile 1 x 1 Half Circle | 19 | 965 |
172 (-14) | ![]() |
49668 | Plate Special 1 x 1 with Tooth | 18 | 963 |
173 (-2) | ![]() |
15070 | Plate Special 1 x 1 with Vertical Tooth | 13 | 956 |
174 (-1) | ![]() |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 12 | 953 |
175 (-10) | ![]() |
3035 | Plate 4 x 8 | 22 | 947 |
176 (+1) | ![]() |
14719 | 2×2 Tile, Corner | 14 | 946 |
177 (-2) | ![]() |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 943 |
178 (-17) | ![]() |
32525 | Technic Beam 1 x 11 Thick | 16 | 935 |
179 (-20) | ![]() |
15392 | Weapon Gun Trigger | 2 | 935 |
180 (-10) | ![]() |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 914 |
181 (-7) | ![]() |
3958 | Plate 6 x 6 | 29 | 908 |
182 (-19) | ![]() |
2450 | Wedge Plate 3 x 3 Cut Corner | 19 | 905 |
183 (+18) | ![]() |
11212 | Plate 3 x 3 | 11 | 899 |
184 (-2) | ![]() |
2445 | 2×12 Plate | 16 | 898 |
185 (-13) | ![]() |
43722 | Wedge Plate 3 x 2 Right | 20 | 897 |
186 (-10) | ![]() |
6632 | Technic Beam 1 x 3 Thin | 11 | 894 |
187 (-37) | ![]() |
51739 | Wedge Plate 2 x 4 | 20 | 882 |
188 (+104) | ![]() |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 8 | 866 |
189 (-27) | ![]() |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 7 | 863 |
190 (+3) | ![]() |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 854 |
191 (-13) | ![]() |
43723 | Wedge Plate 3 x 2 Left | 21 | 851 |
192 (-23) | ![]() |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 9 | 843 |
193 (-63) | ![]() |
15379 | Technic Link Tread with Beveled Edge | 2 | 825 |
194 (-3) | ![]() |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End | 15 | 824 |
195 (-10) | ![]() |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 816 |
196 (-16) | ![]() |
41769 | Wedge Plate 4 x 2 Right | 22 | 814 |
197 (+43) | ![]() |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 7 | 811 |
198 (+48) | ![]() |
24316 | Technic Axle 3 with Stop | 1 | 809 |
199 (-11) | ![]() |
6231 | Panel 1 x 1 x 1 Corner | 12 | 795 |
200 (-6) | ![]() |
87620 | Wedge 2 x 2 Facet | 15 | 795 |
201 (-33) | ![]() |
3037 | Slope 45┬░ 2 x 4 | 19 | 788 |
202 (+3) | ![]() |
30357 | Plate Round Corner 3 x 3 | 26 | 780 |
203 (-19) | ![]() |
41770 | Wedge Plate 4 x 2 Left | 23 | 780 |
204 (-23) | ![]() |
32039 | Technic Axle Connector with Axle Hole | 6 | 769 |
205 (+5) | ![]() |
4282 | 2×16 Plate | 13 | 769 |
206 (-23) | ![]() |
3747b | Slope Inverted 33┬░ 3 x 2 [No Connections between Studs] | 14 | 768 |
207 (-20) | ![]() |
30565 | Plate Round Corner 4 x 4 | 23 | 762 |
208 (+1) | ![]() |
4460b | Slope 75┬░ 2 x 1 x 3 with Hollow Stud | 17 | 755 |
209 (+49) | ![]() |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 16 | 752 |
210 (+88) | ![]() |
32828 | Plate Round 1 x 1 with Hole and Horizontal Bar | 5 | 749 |
211 (-4) | ![]() |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 19 | 748 |
212 (-33) | ![]() |
298c02 | Lever Small Base with Black Lever | 6 | 743 |
213 (-18) | ![]() |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 726 |
214 (-17) | ![]() |
3298 | Slope 33┬░ 3 x 2 | 17 | 716 |
215 (-15) | ![]() |
32556 | Technic Pin Long without Friction Ridges | 1 | 715 |
216 (+143) | ![]() |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 9 | 714 |
217 (+16) | ![]() |
11203 | Tile Special 2 x 2 Inverted | 14 | 705 |
218 (-20) | ![]() |
92947 | Brick Round 2 x 2 [Grill] | 9 | 702 |
219 (-1) | ![]() |
2453 | Brick 1 x 1 x 5 with Blocked Open or Hollow Stud | 16 | 695 |
220 (+90) | ![]() |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holder | 14 | 691 |
221 (-8) | ![]() |
88646 | Tile Special 4 x 3 with 4 Studs in Centre | 5 | 687 |
222 (+69) | ![]() |
32803 | Slope Curved 2 x 2 Inverted | 9 | 685 |
223 (+2) | ![]() |
93274 | Bracket 1 x 2 – 2 x 4 | 11 | 669 |
224 (+373) | ![]() |
49307 | Brick Curved 1 x 1 x 2/3 Double Curved Top, No Studs | 12 | 664 |
225 (-22) | ![]() |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 6 | 659 |
226 (-6) | ![]() |
60596 | Door Frame 1 x 4 x 6 Type 2 | 17 | 657 |
227 (-13) | ![]() |
3176 | Plate Special 3 x 2 with Hole | 18 | 655 |
228 (+17) | ![]() |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 21 | 650 |
229 (+33) | ![]() |
14716 | Brick 1 x 1 x 3 | 13 | 649 |
230 (-7) | ![]() |
3706 | Technic Axle 6 | 2 | 649 |
231 (-9) | ![]() |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Ball | 1 | 637 |
232 (-1) | ![]() |
3036 | Plate 6 x 8 | 17 | 634 |
233 (-27) | ![]() |
32002 | Technic Pin 3/4 | 2 | 631 |
234 (-26) | ![]() |
44302 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 6 | 628 |
235 (+45) | ![]() |
22961 | Technic Pin Connector Hub with 1 Axle | 7 | 627 |
236 (-20) | ![]() |
15462 | Technic Axle 5 with Stop | 2 | 617 |
237 (+42) | ![]() |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 13 | 616 |
238 (+18) | ![]() |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 614 |
239 (-10) | ![]() |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 612 |
240 (-19) | ![]() |
33183 | Plant, Carrot Top | 4 | 612 |
241 (-26) | ![]() |
60477 | Slope 18┬░ 4 x 1 | 13 | 609 |
242 (-25) | ![]() |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 608 |
243 (-31) | ![]() |
41239 | Technic Beam 1 x 13 Thick | 15 | 606 |
244 (+5) | ![]() |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 8 | 605 |
245 (+86) | ![]() |
29120 | Slope Curved 2 x 1 with Stud Notch Left | 21 | 605 |
246 (-16) | ![]() |
44294 | Technic Axle 7 | 2 | 604 |
247 (+86) | ![]() |
29119 | Slope Curved 2 x 1 with Stud Notch Right | 21 | 602 |
248 (-6) | ![]() |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 23 | 597 |
249 (-5) | ![]() |
4624 | Wheel 8mm x 6mm with Slot | 6 | 595 |
250 (+52) | ![]() |
22385 | Tile Special 2 x 3 Pentagonal | 25 | 590 |
251 (-3) | ![]() |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 11 | 588 |
252 (-16) | ![]() |
93606 | Slope Curved 4 x 2 No Studs | 20 | 588 |
253 (+15) | ![]() |
24309 | Slope Curved 3 x 2 No Studs | 11 | 587 |
254 (-4) | ![]() |
3957 | Antenna 1 x 4 with Rounded Top | 9 | 585 |
255 (+58) | ![]() |
2458 | Brick Special 1 x 2 with Pin | 7 | 584 |
256 (+112) | ![]() |
23443 | 3.2 SHAFT W/3.2 HOLE | 7 | 581 |
257 (-4) | ![]() |
11215 | Bracket 5 x 2 x 1 1/3 | 9 | 579 |
258 (-15) | ![]() |
6179 | Tile Special 4 x 4 with Studs on Edge | 16 | 577 |
259 (-8) | ![]() |
2423 | Plant, Leaves 4 x 3 | 11 | 577 |
260 (-34) | ![]() |
87544 | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 14 | 573 |
261 (-7) | ![]() |
60484 | Technic Beam 3 x 3 T-Shape Thick | 6 | 572 |
262 (+15) | ![]() |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 14 | 569 |
263 (+62) | ![]() |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 17 | 563 |
264 (+1) | ![]() |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 18 | 562 |
265 (-30) | ![]() |
30503 | Wedge Plate 4 x 4 Cut Corner | 12 | 560 |
266 (-2) | ![]() |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 555 |
267 (-7) | ![]() |
3659 | Brick Arch 1 x 4 | 17 | 552 |
268 (+3) | ![]() |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 4 | 552 |
269 (-30) | ![]() |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 4 | 551 |
270 (-11) | ![]() |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 547 |
271 (-4) | ![]() |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 20 | 547 |
272 (-34) | ![]() |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 21 | 544 |
273 (+53) | ![]() |
18653 | Brick Arch 1 x 3 x 2 Inverted [Inside Bow] | 19 | 542 |
274 (-19) | ![]() |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 9 | 541 |
275 (+62) | ![]() |
14696 | Technic Link, Reinforced, with Beveled Edge | 1 | 539 |
276 (-29) | ![]() |
54383 | Wedge Plate 6 x 3 Right | 14 | 538 |
277 (-1) | ![]() |
6112 | 1×12 Brick | 14 | 536 |
278 (-46) | ![]() |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 535 |
279 (-16) | ![]() |
3030 | Plate 4 x 10 | 15 | 532 |
280 (+23) | ![]() |
3684c | Slope 75┬░ 2 x 2 x 3 [Hollow Studs] | 15 | 530 |
281 (-6) | ![]() |
13547 | Slope Curved 4 x 1 Inverted | 19 | 527 |
282 (+6) | ![]() |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 11 | 524 |
283 (-31) | ![]() |
54384 | Wedge Plate 6 x 3 Left | 14 | 521 |
284 (-50) | ![]() |
32449 | Technic Beam 1 x 4 Thin | 7 | 520 |
285 (+51) | ![]() |
24307 | Wedge Plate 2 x 2 Right | 15 | 519 |
286 (-49) | ![]() |
4287 | Slope Inverted 33┬░ 3 x 1 (34┬░) | 15 | 517 |
287 (-15) | ![]() |
3680 | Turntable 2 x 2 Plate, Base | 5 | 516 |
288 (-22) | ![]() |
6589 | Technic Gear 12 Tooth Bevel | 2 | 516 |
289 (-28) | ![]() |
64647 | Headwear Accessory Plume / Feather Triple Point | 10 | 515 |
290 (-20) | ![]() |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 6 | 512 |
291 (-18) | ![]() |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 14 | 511 |
292 (+48) | ![]() |
2465 | 1×16 Brick | 12 | 511 |
293 (-15) | ![]() |
3702 | Technic Brick 1 x 8 [7 Holes] | 7 | 508 |
294 (-37) | ![]() |
18649 | Plate Special 1 x 2 with Handles on Ends | 5 | 506 |
295 (-21) | ![]() |
3709 | Technic Plate 2 x 4 [3 Holes] | 8 | 505 |
296 (-69) | ![]() |
87747 | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium | 14 | 500 |
297 (-12) | ![]() |
4510 | Plate Special 1 x 8 with Door Rail | 10 | 498 |
298 (+45) | ![]() |
24299 | Wedge Plate 2 x 2 Left | 15 | 495 |
299 (-15) | ![]() |
92950 | Brick Arch 1 x 6 Raised Arch | 15 | 494 |
300 (+35) | ![]() |
18671 | Bracket 3 x 2 x 1 1/3 | 8 | 492 |
301 (+3) | ![]() |
6111 | 1×10 Brick | 11 | 487 |
302 (+90) | ![]() |
27507 | Tile 4 x 4 Macaroni | 21 | 479 |
303 (-20) | ![]() |
88930 | Slope Brick Curved 2 x 4 x 2/3 No Studs, with Bottom Tubes | 19 | 477 |
304 (-22) | ![]() |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 10 | 471 |
305 (+51) | ![]() |
18980 | Plate Round Corner 2 x 6 Double | 16 | 470 |
306 (-37) | ![]() |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 8 | 468 |
307 (-13) | ![]() |
96874 | Brick and Axle Separator v2.0 | 3 | 466 |
308 (-19) | ![]() |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 9 | 465 |
309 (-10) | ![]() |
6232 | Brick Special 2 x 2 with Pin and Axle Hole | 7 | 459 |
310 (+77) | ![]() |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow (2 x 2 x 1) and Axle Holes (Crossholes) at each end | 8 | 459 |
311 (+133) | ![]() |
36841 | Bracket 1 x 1 – 1 x 1 | 9 | 458 |
312 (-12) | ![]() |
60593 | Window 1 x 2 x 3 Flat Front | 13 | 452 |
313 (-7) | ![]() |
3829c01 | Vehicle Steering Stand 1 x 2 with Black Steering Wheel | 6 | 451 |
314 (-21) | ![]() |
59349 | Panel 1 x 6 x 5 | 20 | 450 |
315 (-1) | ![]() |
4079b | Minifig Seat 2 x 2 with Center Sprue Mark | 12 | 449 |
316 (-75) | ![]() |
6587 | Technic Axle 3 with Stud | 3 | 448 |
317 (-30) | ![]() |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise | 4 | 439 |
318 (-21) | ![]() |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 6 | 437 |
319 (+22) | ![]() |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 8 | 437 |
320 (-11) | ![]() |
3029 | Plate 4 x 12 | 15 | 436 |
321 (-26) | ![]() |
4216 | Brick Special 1 x 2 with Groove | 9 | 436 |
322 (-21) | ![]() |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 4 | 435 |
323 (-18) | ![]() |
15403 | Plate Special 1 x 2 with Mini Blaster | 4 | 434 |
324 (+8) | ![]() |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 5 | 431 |
325 (-17) | ![]() |
3007 | 2×8 Brick | 9 | 430 |
326 (-40) | ![]() |
60471 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth | 5 | 430 |
327 (-11) | ![]() |
3033 | Plate 6 x 10 | 18 | 427 |
328 (-16) | ![]() |
3045 | Slope 45┬░ 2 x 2 Double Convex | 18 | 426 |
329 (-22) | ![]() |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 12 | 425 |
330 (-19) | ![]() |
2921 | Brick Special 1 x 1 with Handle | 10 | 417 |
331 (-4) | ![]() |
43888 | Support 1 x 1 x 6 Solid Pillar | 13 | 410 |
332 (-42) | ![]() |
15303 | Spring Shooter Ammunition 8L | 10 | 409 |
333 (-3) | ![]() |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 9 | 409 |
334 (-16) | ![]() |
91988 | 2×14 Plate | 11 | 406 |
335 (-39) | ![]() |
3703 | Technic Brick 1 x 16 [15 Holes] | 8 | 403 |
336 (-19) | ![]() |
59426 | Technic Axle 5.5 With Stop [Rounded Short End] | 1 | 403 |
337 (-22) | ![]() |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 6 | 402 |
338 (+46) | ![]() |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 6 | 400 |
339 (-5) | ![]() |
2417 | Plant, Leaves 6 x 5 | 11 | 397 |
340 (+41) | ![]() |
2476 | Plate Special 2 x 2 with Pin on Bottom | 3 | 396 |
341 (-20) | ![]() |
43857 | Technic Beam 1 x 2 Thick | 9 | 384 |
342 (+4) | ![]() |
3899 | Equipment Cup / Mug [Plain] | 6 | 383 |
343 (-19) | ![]() |
60849 | Equipment Hose Nozzle with Side String Hole Simplified | 4 | 383 |
344 (+66) | ![]() |
22888 | Plate Round Corner 4 x 8 Double | 21 | 381 |
345 (+24) | ![]() |
88292 | Brick Arch 1 x 3 x 2 | 11 | 376 |
346 (-24) | ![]() |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 8 | 376 |
347 (-28) | ![]() |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 6 | 375 |
348 (-6) | ![]() |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 374 |
349 (+2) | ![]() |
6126b | Wave / Flame Rounded with Base Rim | 5 | 373 |
350 (-6) | ![]() |
3028 | Plate 6 x 12 | 17 | 372 |
351 (-2) | ![]() |
2460 | Tile Special 2 x 2 with Pin | 6 | 371 |
352 (+9) | ![]() |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 12 | 366 |
353 (-30) | ![]() |
2419 | Wedge Plate 3 x 6 Cut Corners | 14 | 362 |
354 (-34) | ![]() |
41678 | Technic Axle and Pin Connector Perpendicular Double Split | 5 | 359 |
355 (-2) | ![]() |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 13 | 359 |
356 (+2) | ![]() |
32291 | Technic Axle and Pin Connector Perpendicular Double | 6 | 358 |
357 (+17) | ![]() |
98100 | Brick Round 2 x 2 Truncated Cone | 8 | 358 |
358 (+188) | ![]() |
37352 | Brick Curved 1 x 2 x 1 No Studs | 16 | 356 |
359 (+5) | ![]() |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 11 | 355 |
360 (+3) | ![]() |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 12 | 353 |
361 (-9) | ![]() |
6180 | Tile Special 4 x 6 with Studs on Edges | 11 | 352 |
362 (-12) | ![]() |
42610 | Wheel 11 x 8 with Center Groove | 2 | 350 |
363 (+7) | ![]() |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 9 | 350 |
364 (-10) | ![]() |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 7 | 349 |
365 (-17) | ![]() |
2736 | Technic Axle Towball | 1 | 349 |
366 (-38) | ![]() |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 14 | 349 |
367 (+4) | ![]() |
41539 | Plate 8 x 8 | 19 | 348 |
368 (-87) | ![]() |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 346 |
369 (-12) | ![]() |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 3 | 346 |
370 (-32) | ![]() |
3895 | Technic Brick 1 x 12 [11 Holes] | 9 | 344 |
371 (+17) | ![]() |
11213 | Plate Round 6 x 6 with Hole | 15 | 341 |
372 (-33) | ![]() |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 339 |
373 (+10) | ![]() |
94925 | Technic Gear 16 Tooth Reinforced [New Style] | 1 | 336 |
374 (-29) | ![]() |
2653 | Brick Special 1 x 4 with Groove | 3 | 336 |
375 (+11) | ![]() |
11253 | Sports Roller Skate | 7 | 334 |
376 (-10) | ![]() |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 14 | 332 |
377 (+20) | ![]() |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 10 | 330 |
378 (-6) | ![]() |
55013 | Technic Axle 8 with Stop | 1 | 330 |
379 (-19) | ![]() |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 7 | 328 |
380 (+2) | ![]() |
43898 | Dish 3 x 3 Inverted [Radar] | 18 | 328 |
381 (-16) | ![]() |
92438 | Plate 8 x 16 | 23 | 326 |
382 (+16) | ![]() |
3633 | Fence 1 x 4 x 1 | 7 | 325 |
383 (-4) | ![]() |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 6 | 323 |
384 (+41) | ![]() |
64179 | Technic Beam Frame 5 x 7 Open Center Thick | 3 | 319 |
385 (+16) | ![]() |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 10 | 319 |
386 (-39) | ![]() |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 318 |
387 (-25) | ![]() |
13731 | Brick Curved 10 x 1 [Symmetric Inside Ridges] | 15 | 318 |
388 (+6) | ![]() |
6003 | Plate Round Corner 6 x 6 | 16 | 315 |
389 (+23) | ![]() |
60476 | Brick Special 1 x 1 with Clip Horizontal | 3 | 312 |
390 (-14) | ![]() |
30236 | Brick Special 1 x 2 with Handle | 8 | 310 |
391 (+105) | ![]() |
36752a | Equipment Wand [Individual] | 7 | 309 |
392 (-12) | ![]() |
11609 | Star with Stud Holder | 5 | 308 |
393 (-18) | ![]() |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 307 |
394 (+151) | ![]() |
26287 | Technic Driving Ring Connector Smooth | 3 | 305 |
395 (+10) | ![]() |
3679 | Turntable 2 x 2 Plate – Top | 1 | 305 |
396 (+30) | ![]() |
15458 | Technic Panel 3 X 11 x 1 | 11 | 301 |
397 (-19) | ![]() |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 6 | 301 |
398 (+67) | ![]() |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 16 | 300 |
399 (+3) | ![]() |
4600 | Plate Special 2 x 2 with Wheel Holders | 3 | 300 |
400 (-45) | ![]() |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 5 | 300 |
401 (-28) | ![]() |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 5 | 299 |
402 (+2) | ![]() |
87609 | Plate Special 2 x 6 x 2/3 [Four Studs on Side] | 14 | 299 |
403 (+25) | ![]() |
13548 | Wedge Sloped 45┬░ 2 x 2 Corner | 10 | 297 |
404 (+14) | ![]() |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 7 | 296 |
405 (-20) | ![]() |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 295 |
406 (+48) | ![]() |
11610 | Food Ice Cream Cone | 9 | 294 |
407 (+1) | ![]() |
32056 | Technic Beam 3 x 3 L-Shape Thin | 6 | 292 |
408 (-41) | ![]() |
30553 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth | 4 | 292 |
409 (-2) | ![]() |
50745 | Mudguard 4 x 2 1/2 x 2 with Arch Round | 17 | 291 |
410 (-19) | ![]() |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 291 |
411 (+24) | ![]() |
89522 | Creature Body Part, Horn (Unicorn) | 12 | 291 |
412 (+10) | ![]() |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 11 | 286 |
413 (+7) | ![]() |
87081 | Brick Round 4 x 4 [Centre Hole] | 11 | 285 |
414 (+5) | ![]() |
30363 | Slope 18┬░ 4 x 2 | 11 | 284 |
415 (+284) | ![]() |
41682 | Tile Special 2 x 2 with 1 x 2 Vertical Plate | 10 | 280 |
416 (+18) | ![]() |
2723 | Technic Disk 3 x 3 | 5 | 280 |
417 (-27) | ![]() |
3707 | Technic Axle 8 | 2 | 279 |
418 (+11) | ![]() |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 9 | 278 |
419 (-42) | ![]() |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 277 |
420 (-27) | ![]() |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 276 |
421 (-7) | ![]() |
32063 | Technic Beam 1 x 6 Thin | 4 | 274 |
422 (+54) | ![]() |
99008 | Technic Axle 4 with Centre Stop | 1 | 273 |
423 (-34) | ![]() |
4488 | Plate Special 2 x 2 with Wheel Holder | 2 | 273 |
424 (-18) | ![]() |
50304 | Wedge Plate 8 x 3 Right | 14 | 272 |
425 (-9) | ![]() |
2496 | Wheel Skateboard / Trolley | 2 | 270 |
426 (-11) | ![]() |
64782 | Technic Panel 1 x 5 x 11 | 14 | 269 |
427 (-3) | ![]() |
30165 | Brick Curved 2 x 2 with Two Top Studs | 15 | 269 |
428 (+20) | ![]() |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 6 | 268 |
429 (+11) | ![]() |
3830 | Hinge Brick 1 x 4 [Upper] | 9 | 267 |
430 (-3) | ![]() |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 15 | 267 |
431 (+100) | ![]() |
18646 | Plate Round Half 3 x 6 with 1 x 2 Cutout | 17 | 267 |
432 (+164) | ![]() |
32606 | Plant, Flower, Minifig Accessory with 7 Thick Petals and Pin | 3 | 267 |
433 (+8) | ![]() |
3831 | Hinge Brick 1 x 4 [Lower] | 9 | 267 |
434 (-21) | ![]() |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 6 | 267 |
435 (+7) | ![]() |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 267 |
436 (-40) | ![]() |
60485 | Technic Axle 9 | 2 | 265 |
437 (-42) | ![]() |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 264 |
438 (+51) | ![]() |
22890 | Plate Special 1 x 2 with End Towball | 1 | 262 |
439 (-30) | ![]() |
50305 | Wedge Plate 8 x 3 Left | 14 | 261 |
440 (-7) | ![]() |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Ball | 1 | 260 |
441 (-10) | ![]() |
2343 | Equipment Goblet | 6 | 258 |
442 (-21) | ![]() |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | 7 | 258 |
443 (-114) | ![]() |
30602 | Slope Curved 2 x 2 with Lip, No Studs | 21 | 257 |
444 (-27) | ![]() |
98282 | Mudguard 4 x 2 1/2 x 1 with Arch Round | 9 | 256 |
445 (-13) | ![]() |
6106 | Wedge Plate 6 x 6 Cut Corner | 9 | 256 |
446 (+4) | ![]() |
22667 | Plant, Cherries | 3 | 255 |
447 (+10) | ![]() |
47456 | Wedge Curved 2 x 3 x 2/3 Two Studs, Wing End | 17 | 252 |
448 (+30) | ![]() |
24375 | Rubber Technic Tread Attachment | 2 | 250 |
449 (-11) | ![]() |
3942c | Cone 2 x 2 x 2 with Completely Open Stud | 15 | 248 |
450 (-50) | ![]() |
15400 | Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top | 1 | 247 |
451 (-6) | ![]() |
57895 | Glass for Window 1 x 4 x 6 | 8 | 247 |
452 (+25) | ![]() |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 2 | 247 |
453 (-16) | ![]() |
32474 | Technic Ball Joint | 13 | 246 |
454 (+13) | ![]() |
4490 | Brick Arch 1 x 3 | 8 | 245 |
455 (+33) | ![]() |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 14 | 245 |
456 — | ![]() |
41669 | Technic Tooth 1 x 3 with Axle Hole | 17 | 244 |
457 (+33) | ![]() |
24855 | Plant, Flower Stem with Bottom Pin | 2 | 243 |
458 (-12) | ![]() |
87414 | Tyre Offset Tread Small with Band around Center of Tread | 1 | 243 |
459 (+9) | ![]() |
40379 | Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section | 13 | 242 |
460 (+207) | ![]() |
35787 | Tile 45┬░ Cut 2 x 2 | 10 | 240 |
461 (+87) | ![]() |
27940 | Technic Pin Connector Hub with 2 Axles | 1 | 240 |
462 (+68) | ![]() |
11208 | Wheel 14mm D. x 9.9mm with Centre Groove, Fake Bolts and 6 Spokes | 7 | 238 |
463 (-2) | ![]() |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 11 | 238 |
464 (+27) | ![]() |
27261 | Plate Special 2 x 3 with rocks | 6 | 238 |
465 (-54) | ![]() |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 8 | 237 |
466 (-23) | ![]() |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 236 |
467 (-7) | ![]() |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 5 | 236 |
468 (-29) | ![]() |
92907 | Technic Axle and Pin Connector Perpendicular Split | 4 | 235 |
469 (-39) | ![]() |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 10 | 235 |
470 (-15) | ![]() |
30162 | Equipment Binoculars | 5 | 235 |
471 (-48) | ![]() |
32001 | Technic Plate 2 x 6 [5 Holes] | 6 | 234 |
472 (-10) | ![]() |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 13 | 233 |
473 (+29) | ![]() |
17485 | Brick Round 2 x 2 with Pin Holes | 8 | 233 |
474 (-21) | ![]() |
30157 | Plate Special 2 x 4 with Pins | 3 | 230 |
475 (+45) | ![]() |
33078 | Food Hot Dog / Sausage | 7 | 229 |
476 (+61) | ![]() |
11618 | Headwear Accessory Bow with Heart, Long Ribbon and Pin | 5 | 229 |
477 (+57) | ![]() |
11946 | Technic Panel Fairing #21 Very Small Smooth, Side B | 18 | 229 |
478 (-9) | ![]() |
6223 | Brick 2 x 2 without Inside Ridges | 6 | 226 |
479 (+24) | ![]() |
85943 | Technic Brick 1 x 2 with Hole and Dual Beam Extensions | 2 | 225 |
480 (+60) | ![]() |
11947 | Technic Panel Fairing #22 Very Small Smooth, Side A | 18 | 224 |
481 (-15) | ![]() |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 4 | 224 |
482 (+2) | ![]() |
33243 | Brick Curved 1 x 3 x 2 | 17 | 223 |
483 (-11) | ![]() |
3297 | Slope 33┬░ 3 x 4 | 11 | 223 |
484 (-33) | ![]() |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 3 | 222 |
485 (-6) | ![]() |
61485 | Turntable 4 x 4 Square Base, Locking | 4 | 222 |
486 (-27) | ![]() |
46212 | Brick 1 x 2 x 5 without Side Supports | 7 | 221 |
487 (-29) | ![]() |
30031 | Minifig Handlebars | 7 | 220 |
488 (-25) | ![]() |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 219 |
489 (+24) | ![]() |
30044 | Window 1 x 2 x 2 2/3 with Rounded Top | 9 | 216 |
490 (+60) | ![]() |
14718 | Panel 1 x 4 x 2 with Side Supports – Hollow Studs | 9 | 216 |
491 (-18) | ![]() |
16577 | Brick Arch 1 x 8 x 2 Raised | 11 | 215 |
492 (-40) | ![]() |
47398 | Wedge Plate 12 x 3 Right | 10 | 215 |
493 (-44) | ![]() |
15456 | Plate Special 2 x 2 with Towball and Hole | 2 | 214 |
494 (+9505) | ![]() |
64570 | Bracket 2 x 6 – 1 x 6 Inverted | 5 | 213 |
495 (+32) | ![]() |
4345 | Box 2 x 2 x 2 [Hollow Studs] | 6 | 211 |
496 (+3) | ![]() |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 210 |
497 (+81) | ![]() |
35464 | Slope Double 45┬░ 1 x 1 | 6 | 209 |
498 (-62) | ![]() |
30552 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 3 | 208 |
499 (-16) | ![]() |
3038 | Slope 45┬░ 2 x 3 | 6 | 208 |
500 (-53) | ![]() |
15391 | Weapon Gun / Blaster / Shooter Mini | 6 | 208 |
501 (-20) | ![]() |
3708 | Technic Axle 12 | 2 | 207 |
502 (-1) | ![]() |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 13 | 207 |
503 (+12) | ![]() |
40344 | Technic Brick 4 x 6 Open Center | 3 | 206 |
504 (-19) | ![]() |
30145 | Brick 2 x 2 x 3 | 9 | 206 |
505 (-19) | ![]() |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 11 | 203 |
506 (+32) | ![]() |
4346 | Box 2 x 2 x 2 Door with Slot | 6 | 203 |
507 (-32) | ![]() |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 7 | 203 |
508 (-16) | ![]() |
6157 | Plate Special 2 x 2 with Wheels Holder Wide | 3 | 202 |
509 (-39) | ![]() |
2639 | 4×4 Plate, Corner | 3 | 200 |
510 (+9489) | ![]() |
44861 | Plate Special 1 x 2 [Open O Top Clip] | 7 | 199 |
511 (-29) | ![]() |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 197 |
512 (-18) | ![]() |
32059 | Wedge Plate 4 x 6 Cut Corners | 15 | 196 |
513 (+157) | ![]() |
18853 | Plant, Flower with Pointed Petals and Pin | 5 | 195 |
514 (-10) | ![]() |
18977 | Tyre 24 x 12 Low Profile | 1 | 195 |
515 (+68) | ![]() |
11209 | Tyre 21 x 9.9 | 1 | 195 |
516 (-6) | ![]() |
61482 | Equipment Handcuffs | 4 | 195 |
517 (-43) | ![]() |
47397 | Wedge Plate 12 x 3 Left | 10 | 194 |
518 (+24) | ![]() |
92410 | Cupboard 2 x 3 x 2 with Solid Studs | 10 | 193 |
519 (-24) | ![]() |
30099 | Brick Arch 1 x 5 x 4 Inverted | 13 | 193 |
520 (-14) | ![]() |
60616 | Door 1 x 4 x 6 Smooth with Square Handle Plinth | 8 | 192 |
521 (+51) | ![]() |
25893 | Plate Round 1 x 1 with Open Stud and Bar on Underside | 2 | 191 |
522 (-13) | ![]() |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 191 |
523 (-18) | ![]() |
3743 | Technic Gear Rack 1 x 4 | 3 | 191 |
524 (+58) | ![]() |
2462 | Wedge 3 x 3 Facet | 4 | 190 |
525 (+14) | ![]() |
18946 | Technic Gear 16 Tooth with Clutch on Both Sides | 1 | 190 |
526 (-14) | ![]() |
6215 | Brick Curved 2 x 3 with Curved Top | 13 | 186 |
527 (-16) | ![]() |
3006 | 2×10 Brick | 9 | 185 |
528 (-57) | ![]() |
92690 | Bar 1L with Top Stud and Two Side Studs | 4 | 184 |
529 (-42) | ![]() |
3738 | Technic Plate 2 x 8 [7 Holes] | 7 | 184 |
530 (-33) | ![]() |
2447 | Headwear Accessory Visor For Standard Helmet | 5 | 184 |
531 (+38) | ![]() |
3648 | Technic Gear 24 Tooth [New Style with Single Axle Hole][Type 2] | 1 | 184 |
532 (-4) | ![]() |
44375 | Dish 6 x 6 Inverted (Radar) with Hollow Studs | 20 | 184 |
533 (+23) | ![]() |
64648 | Animal, Fish [Anti-Stud Mouth] | 6 | 183 |
534 (+26) | ![]() |
6182 | Brick Arch 1 x 4 x 2 | 10 | 183 |
535 (-55) | ![]() |
74261 | Large Figure Skeletal, Joint Extender [High Friction] | 1 | 183 |
536 (+40) | ![]() |
14720 | Technic Beam 3 x 5 Thick [90┬░ Offset Centre Beam Holes] | 3 | 181 |
537 (-12) | ![]() |
6191 | Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top with Raised Inside Support | 18 | 180 |
538 (-22) | ![]() |
15209 | Plate 1 x 2 Special with Two Vertical Teeth | 6 | 180 |
539 (-20) | ![]() |
55982 | Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes | 7 | 179 |
540 (-47) | ![]() |
33299a | Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank | 3 | 179 |
541 (-43) | ![]() |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 179 |
542 (-13) | ![]() |
30526 | Brick Special 1 x 2 with 2 Pins | 3 | 178 |
543 (-79) | ![]() |
32072 | Technic Knob Wheel | 3 | 177 |
544 (+45) | ![]() |
98834 | Vehicle, Spoiler 2 x 4 with Handle | 12 | 176 |
545 (+9) | ![]() |
40345 | Technic Brick 6 x 8 with Open Center 4 x 6 | 3 | 175 |
546 (-13) | ![]() |
98585 | Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes | 8 | 175 |
547 (+59) | ![]() |
47458 | Wedge Curved 1 x 2 x 2/3 No Studs, Wing End | 8 | 173 |
548 (-26) | ![]() |
92338 | Chain 5 links | 6 | 173 |
549 (-13) | ![]() |
60608 | Window 1 x 2 x 3 Pane with Thick Corner Tabs | 5 | 172 |
550 (+817) | ![]() |
37762 | Equipment Candle Stick | 4 | 171 |
551 (-25) | ![]() |
95344 | Bucket 1 x 1 x 1 Handle | 4 | 170 |
552 (-38) | ![]() |
91405 | Plate 16 x 16 | 15 | 169 |
553 (-46) | ![]() |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 9 | 168 |
554 (-36) | ![]() |
3737 | Technic Axle 10 | 2 | 168 |
555 (+2) | ![]() |
19220 | Equipment Radio [Extended Handle, Expanded Speaker Grille] | 2 | 168 |
556 (-39) | ![]() |
4175 | Plate Special 1 x 2 with Ladder | 8 | 167 |
557 (-13) | ![]() |
3960 | Dish 4 x 4 Inverted [Radar] | 14 | 166 |
558 (-34) | ![]() |
42023 | Brick Curved 6 x 1 Inverted | 10 | 165 |
559 (+5) | ![]() |
93160 | Animal Body Part, Dog Bone [Short] | 2 | 164 |
560 (+25) | ![]() |
64225 | Wedge Curved 4 x 3 No Studs [Plain] | 16 | 164 |
561 (+25) | ![]() |
4590 | Plate Special 1 x 4 Offset | 5 | 163 |
562 (+154) | ![]() |
23950 | Panel 1 x 3 x 1 | 9 | 163 |
563 (+51) | ![]() |
3685 | Slope 75┬░ 2 x 2 x 3 Double Convex | 9 | 163 |
564 (+6) | ![]() |
61780 | Container Box 2 x 2 x 2 – Top Opening | 4 | 162 |
565 (+51) | ![]() |
85975 | Cone 1.17 x 1.17 x 2/3 (Fez) | 8 | 162 |
566 (+66) | ![]() |
24482 | Weapon Spear Tip with Fins | 5 | 162 |
567 (-67) | ![]() |
57909 | Technic Brick Modified 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball | 3 | 161 |
568 (+9) | ![]() |
90195 | Window 1 x 2 x 2 Castle | 6 | 160 |
569 (-16) | ![]() |
4006 | Tool Screwdriver and Spanner / Wrench | 3 | 159 |
570 (-23) | ![]() |
76766 | Bracket 5 x 2 x 2 1/3 | 5 | 159 |
571 (-36) | ![]() |
58247 | Weapon Gun / Blaster Short (Star Wars) | 4 | 159 |
572 (+72) | ![]() |
50254 | Train Wheel Small, hole notched for wheels holder pin | 3 | 159 |
573 (-8) | ![]() |
18948 | Technic Driving Ring Connector | 1 | 158 |
574 (-42) | ![]() |
2655 | Plate, Round 2 x 2 Thin with Wheel Holder | 1 | 158 |
575 (+40) | ![]() |
30562 | Panel 4 x 4 x 6 Quarter Cylinder | 10 | 158 |
576 (+121) | ![]() |
22886 | Brick 1 x 2 x 3 with Bottom Stud Holder | 6 | 158 |
577 (+32) | ![]() |
88293 | Brick Round Corner 3 x 3 x 2 Dome Top | 17 | 157 |
578 (+204) | ![]() |
6060 | Brick Arch 1 x 6 x 3 1/3 Curved Top | 12 | 157 |
579 (+68) | ![]() |
22484 | Bar 2L with Towball | 4 | 156 |
580 (-39) | ![]() |
92738 | Weapon Gun / Blaster Small (Star Wars) | 2 | 155 |
581 (-178) | ![]() |
4865a | Panel 1 x 2 x 1 [Square Corners] | 12 | 155 |
582 (+8) | ![]() |
45590 | Technic Axle Connector Double Flexible [Rubber] | 1 | 154 |
583 (-21) | ![]() |
21445 | Plate Special 1 x 2 with Wheel Holder | 2 | 153 |
584 (+47) | ![]() |
13564 | Animal Body Part, Horn (Cattle) / Tentacle / Vine / Branch / Tongue – Long | 6 | 153 |
585 (+76) | ![]() |
23948 | Technic Axle 11 | 2 | 153 |
586 (+63) | ![]() |
22889 | Slope Inverted 45┬░ 6 x 2 Double with 2 x 4 Cutout | 10 | 152 |
587 (+88) | ![]() |
60032 | Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass | 7 | 152 |
588 (+36) | ![]() |
30663 | Vehicle Steering Wheel Small, 2 x 2 [Reinforced] | 2 | 151 |
589 (+16) | ![]() |
15397 | Plate 3 x 3 Cross | 5 | 151 |
590 (+9) | ![]() |
92409 | Tyre 17.5 x 6 with Shallow Staggered Treads | 1 | 151 |
591 (+1) | ![]() |
6259 | Cylinder Half 2 x 4 x 4 | 7 | 151 |
592 (+144) | ![]() |
35044 | Plate Special 4 x 4 with Curved Cutout | 6 | 151 |
593 (-32) | ![]() |
15092 | Plate 2 x 2 with 2 Pins | 1 | 150 |
594 (-20) | ![]() |
52031 | Slope Curved 4 x 6 x 2/3 Triple Curved with 4 Studs | 19 | 150 |
595 (-52) | ![]() |
98721 | Weapon Batarang | 5 | 150 |
596 (+70) | ![]() |
10884 | Plant, Leaves 6 x 5 Swordleaf with Clip (thick open O clip) | 6 | 149 |
597 (-89) | ![]() |
42022 | Brick Curved 6 x 1 | 13 | 149 |
598 (-18) | ![]() |
93058b | Weapon Throwing Star / Shuriken with Textured Grips | 2 | 148 |
599 (-36) | ![]() |
2569 | Antenna Whip 8H | 5 | 148 |
600 (-201) | ![]() |
16770 | Creature Body Part, Barb Large (Claw, Talon) with Clip | 11 | 148 |