← For the latest data, visit brickarchitect.com/most-common-lego-parts.
(This version was archived. The data on this page is referenced in our popular March 2019 article 2019 Most Common LEGO Parts.)
Top 500 Most Common LEGO Parts (March 2019)
This list only includes the top 500 parts. There are well over a thousand unique parts in currently available sets—that doesn’t include printed parts, minifigures, fabric, or string.
Note: Year-over-year comparisons are between 2014-2018, and 2015-2019, acknowledging that about 1/2 of the 2019 sets have not been released at the time of this analysis.
| Rank | Image | Part ID | Part Name | # Colors | # Pieces |
|---|---|---|---|---|---|
| 1 — |  |
3023 | 1×2 Plate | 49 | 25662 |
| 2 — |  |
4073 | 1×1 Plate, Round | 40 | 23480 |
| 3 — |  |
3024 | 1×1 Plate | 46 | 20983 |
| 4 — |  |
2780 | Technic Pin with Friction Ridges Lengthwise and Center Slots | 1 | 17222 |
| 5 — |  |
54200 | 1×1 Slope 30° (Cheese) | 50 | 11436 |
| 6 — |  |
3004 | 1×2 Brick | 39 | 11307 |
| 7 — |  |
3069b | 1×2 Tile | 45 | 11047 |
| 8 — |  |
3710 | 1×4 Plate | 34 | 10254 |
| 9 — |  |
3005 | 1×1 Brick | 42 | 9249 |
| 10 — |  |
3020 | 2×4 Plate | 34 | 8965 |
| 11 — |  |
3022 | 2×2 Plate | 30 | 8737 |
| 12 (+1) |  |
6558 | Technic Pin Long with Friction Ridges Lengthwise | 1 | 7215 |
| 13 (-1) |  |
2412b | 1×2 Tile, Grille | 25 | 7119 |
| 14 — |  |
15573 | 1×2 Jumper | 28 | 7056 |
| 15 (+1) |  |
98138 | 1×1 Tile, Round | 32 | 7009 |
| 16 (+1) |  |
3070b | 1×1 Tile | 40 | 6319 |
| 17 (+1) |  |
3021 | 2×3 Plate | 28 | 6292 |
| 18 (-3) |  |
3003 | 2×2 Brick | 37 | 6244 |
| 19 — |  |
3666 | 1×6 Plate | 30 | 5981 |
| 20 (+1) |  |
3623 | 1×3 Plate | 31 | 5786 |
| 21 (-1) |  |
2431 | 1×4 Tile | 38 | 5722 |
| 22 — |  |
11477 | 2×1 Curved | 39 | 5704 |
| 23 (+2) |  |
85984 | 1×2 Slope 30° (Double Cheese) | 32 | 5295 |
| 24 (-1) |  |
4274 | Technic Pin 1/2 | 3 | 5248 |
| 25 (-1) |  |
3010 | 1×4 Brick | 32 | 5228 |
| 26 — |  |
3062b | Brick Round 1 x 1 Open Stud | 34 | 4823 |
| 27 (+4) |  |
2420 | 2×2 Plate, Corner | 21 | 4511 |
| 28 (+1) |  |
87580 | 2×2 Jumper | 30 | 4460 |
| 29 (-2) |  |
3001 | 2×4 Brick | 29 | 4371 |
| 30 (+6) |  |
15068 | 2×2 Curved | 34 | 4282 |
| 31 (-3) |  |
43093 | Technic Axle Pin with Friction Ridges Lengthwise | 1 | 4230 |
| 32 (+1) |  |
3795 | 2×6 Plate | 28 | 4116 |
| 33 (-3) |  |
3068b | 2×2 Tile | 33 | 4088 |
| 34 (-2) |  |
3040 | 2×1 Slope 45° | 33 | 3923 |
| 35 — |  |
87079 | 2×4 Tile | 33 | 3778 |
| 36 (+1) |  |
6636 | 1×6 Tile | 25 | 3609 |
| 37 (+1) |  |
4032 | 2×2 Plate, Round w/ Axle | 21 | 3575 |
| 38 (+6) |  |
15712 | 1×1 Clip, Top | 12 | 3488 |
| 39 — |  |
87087 | 1×1 Brick, Stud 1-side | 27 | 3483 |
| 40 (-6) |  |
33291 | 1×1 Plate, Flower (4 Petals) | 16 | 3464 |
| 41 (-1) |  |
32062 | Technic Axle 2 Notched | 2 | 3225 |
| 42 — |  |
3622 | 1×3 Brick | 26 | 3168 |
| 43 (-2) |  |
4589 | 1×1 Cone | 34 | 3071 |
| 44 (-1) |  |
4070 | 1×1 Brick, Headlight | 16 | 2986 |
| 45 — |  |
3941 | 2×2 Brick, Round w/ Axle | 26 | 2898 |
| 46 (+18) |  |
85861 | 1×1 Plate, Round w/ hole | 17 | 2830 |
| 47 (+3) |  |
99780 | 1×2 Bracket, Inverted | 15 | 2802 |
| 48 — |  |
3460 | 1×8 Plate | 24 | 2780 |
| 49 (-2) |  |
32123 | Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced | 2 | 2769 |
| 50 (-4) |  |
3009 | 1×6 Brick | 27 | 2673 |
| 51 — |  |
32028 | 1×2 Plate w/ Door Rail | 17 | 2610 |
| 52 (-3) |  |
63864 | 1×3 Tile | 27 | 2590 |
| 53 (+4) |  |
99207 | 2×2 Bracket, Inverted | 11 | 2520 |
| 54 — |  |
32054 | Technic Pin Long with Friction Ridges Lengthwise and Stop Bush | 4 | 2399 |
| 55 (+5) |  |
4162 | 1×8 Tile | 21 | 2355 |
| 56 (-4) |  |
3039 | 2×2 Slope 45° | 30 | 2343 |
| 57 (-2) |  |
2654 | 2×2 Round, Boat Stud | 23 | 2317 |
| 58 (+11) |  |
11211 | 1×2 Brick, 2 Studs 1-side | 13 | 2311 |
| 59 (-1) |  |
2357 | 2×2 Brick, Corner | 21 | 2311 |
| 60 (+6) |  |
6091 | 1×2×1⅔ Curved | 31 | 2303 |
| 61 (-8) |  |
3700 | 1×2 Technic Brick, 1 Hole | 16 | 2297 |
| 62 (-6) |  |
3665 | 2×1 Slope 45°, Inverted | 28 | 2287 |
| 63 (+4) |  |
4085d | 1×1 Plate w/ Clip, Vertical | 13 | 2283 |
| 64 (-5) |  |
3660 | 2×2 Slope 45°, Inverted | 24 | 2250 |
| 65 (-2) |  |
44728 | 2×2 Bracket | 15 | 2238 |
| 66 (-1) |  |
3034 | 2×8 Plate | 25 | 2200 |
| 67 (-6) |  |
60478 | 1×2 Plate w/ Handle, End | 14 | 2135 |
| 68 (-6) |  |
3713 | Technic Bush | 3 | 2115 |
| 69 (-1) |  |
4519 | Technic Axle 3 | 2 | 2080 |
| 70 (+1) |  |
63868 | 1×2 Plate w/ Clip End, Horizontal | 12 | 2066 |
| 71 (-1) |  |
59443 | Technic Axle Connector | 9 | 2021 |
| 72 (+2) |  |
92593 | 1×4 Plate w/ 2 Studs | 24 | 2020 |
| 73 (-1) |  |
98283 | 1×2 Brick, Masonry | 8 | 1965 |
| 74 (-1) |  |
48336 | 1×2 Plate w/ Handle, Side | 11 | 1963 |
| 75 (+1) |  |
92280 | 1×2 Plate w/ Clip, Top | 6 | 1894 |
| 76 (-1) |  |
30136 | 1×2 Brick, Log (Palisade) | 12 | 1871 |
| 77 (+1) |  |
32064 | 1×2 Technic Brick, 1 Axle Hole | 11 | 1770 |
| 78 (+17) |  |
22885 | 1×2×1⅔ Brick, 4 Studs 1-side | 7 | 1768 |
| 79 (+1) |  |
3002 | 2×3 Brick | 14 | 1648 |
| 80 (+4) |  |
92946 | Slope 45┬░ 2 x 1 with 2/3 Cutout [New Version] | 17 | 1624 |
| 81 (-4) |  |
2877 | Brick Special 1 x 2 with Grill | 8 | 1606 |
| 82 (-3) |  |
50950 | 3×1 Curved | 32 | 1603 |
| 83 (+5) |  |
99781 | Bracket 1 x 2 – 1 x 2 | 11 | 1602 |
| 84 (-1) |  |
61409 | Slope 18┬░ 2 x 1 x 2/3 with 4 Slots | 18 | 1556 |
| 85 — |  |
93273 | 4×1 Curved, Double | 26 | 1556 |
| 86 (-4) |  |
6541 | Technic Brick 1 x 1 with Hole | 12 | 1530 |
| 87 (-1) |  |
4477 | 1×10 Plate | 15 | 1500 |
| 88 (+1) |  |
3031 | Plate 4 x 4 | 22 | 1489 |
| 89 (+13) |  |
99206 | Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised | 13 | 1483 |
| 90 (-3) |  |
3673 | Technic Pin without Friction Ridges Lengthwise | 2 | 1466 |
| 91 (+1) |  |
6536 | Technic Axle and Pin Connector Perpendicular | 13 | 1444 |
| 92 (-1) |  |
30414 | Brick Special 1 x 4 with 4 Studs on One Side | 13 | 1421 |
| 93 (+7) |  |
14769 | 2×2 Tile, Round | 26 | 1417 |
| 94 (-1) |  |
2540 | Plate Special 1 x 2 Side Handle [Free Ends] | 14 | 1404 |
| 95 (+3) |  |
3245c | Brick 1 x 2 x 2 with Inside Stud Holder | 18 | 1399 |
| 96 (-6) |  |
32523 | Technic Beam 1 x 3 Thick | 15 | 1396 |
| 97 (-1) |  |
62462 | Technic Pin Connector Round [Slotted] | 15 | 1393 |
| 98 (-1) |  |
61252 | Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip] | 16 | 1386 |
| 99 (+7) |  |
11214 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | 2 | 1367 |
| 100 (-6) |  |
32316 | Technic Beam 1 x 5 Thick | 15 | 1362 |
| 101 (+14) |  |
88323 | Technic Link Tread Wide with Two Pin Holes, Reinforced | 4 | 1359 |
| 102 (+23) |  |
18654 | Technic Pin Connector Round 1L [Beam] | 10 | 1338 |
| 103 (+50) |  |
25269 | Tile Round 1 x 1 Quarter | 26 | 1309 |
| 104 (+33) |  |
24866 | Plant, Flower 1 x 1 | 14 | 1305 |
| 105 — |  |
48729 | Bar 1L with Clip [Cut Edges and One Side Hole] | 6 | 1277 |
| 106 (-7) |  |
53451 | Barb Small Flexible [Claw, Horn] | 12 | 1275 |
| 107 — |  |
60483 | Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole | 8 | 1260 |
| 108 (-5) |  |
4740 | 2×2 Dish | 27 | 1240 |
| 109 (-1) |  |
32524 | Technic Beam 1 x 7 Thick | 15 | 1228 |
| 110 (-6) |  |
32140 | Technic Beam 2 x 4 L-Shape Thick | 12 | 1226 |
| 111 — |  |
60470 | Plate Special 1 x 2 with Clips Horizontal [Open O Clips] | 9 | 1205 |
| 112 (-2) |  |
2456 | 2×6 Brick | 19 | 1196 |
| 113 (-1) |  |
3032 | Plate 4 x 6 | 22 | 1193 |
| 114 (-1) |  |
4286 | Slope 33┬░ 3 x 1 | 22 | 1183 |
| 115 (+11) |  |
87994 | Bar 3L | 10 | 1183 |
| 116 (-7) |  |
32013 | Technic Axle and Pin Connector Angled #1 | 11 | 1181 |
| 117 (-36) |  |
15379 | Technic Link Tread with Beveled Edge | 2 | 1170 |
| 118 (-4) |  |
3832 | 2×10 Plate | 14 | 1169 |
| 119 (-1) |  |
3008 | 1×8 Brick | 15 | 1160 |
| 120 (-19) |  |
30374 | Bar 4L (Lightsaber Blade / Wand) | 17 | 1145 |
| 121 (-1) |  |
32526 | Technic Beam 3 x 5 L-Shape Thick | 15 | 1137 |
| 122 (-3) |  |
32000 | Technic Brick 1 x 2 [2 Holes] | 8 | 1126 |
| 123 (+13) |  |
15100 | Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise | 5 | 1113 |
| 124 (-7) |  |
3749 | Technic Axle Pin without Friction Ridges Lengthwise | 1 | 1100 |
| 125 (-3) |  |
3705 | Technic Axle 4 | 2 | 1070 |
| 126 (-5) |  |
4081b | Plate Special 1 x 1 with Clip Light [Thick Ring] | 13 | 1066 |
| 127 (-3) |  |
42003 | Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes | 10 | 1063 |
| 128 (-12) |  |
61678 | Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges] | 25 | 1053 |
| 129 (+3) |  |
11458 | Plate Special 1 x 2 with Pin Hole on Top | 11 | 1052 |
| 130 (+3) |  |
4599b | Tap 1 x 1 with Hole in Spout | 10 | 1045 |
| 131 (-1) |  |
2454 | Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges | 19 | 1040 |
| 132 (-9) |  |
4865b | Panel 1 x 2 x 1 [Rounded Corners] | 22 | 1027 |
| 133 (-5) |  |
32073 | Technic Axle 5 | 2 | 1015 |
| 134 (+14) |  |
11476 | Plate Special 1 x 2 with Clip Horizontal on Side | 17 | 1009 |
| 135 (-4) |  |
3701 | Technic Brick 1 x 4 [3 Holes] | 10 | 1000 |
| 136 (+19) |  |
18651 | Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | 1 | 979 |
| 137 (-8) |  |
87083 | Technic Axle 4 with Stop | 1 | 972 |
| 138 (-11) |  |
60481 | Slope 65┬░ 2 x 1 x 2 | 25 | 970 |
| 139 (+1) |  |
41677 | Technic Beam 1 x 2 Thin | 7 | 932 |
| 140 (+40) |  |
20482 | Tile Round 1 x 1 with Pin | 13 | 924 |
| 141 (-6) |  |
51739 | Wedge Plate 2 x 4 | 20 | 920 |
| 142 (+43) |  |
24201 | Slope Curved 2 x 1 Inverted | 14 | 901 |
| 143 (-1) |  |
3065 | Brick 1 x 2 without Bottom Tube | 11 | 896 |
| 144 (-3) |  |
64644 | Equipment Telescope | 7 | 895 |
| 145 (-11) |  |
87552 | Panel 1 x 2 x 2 [Side Supports / Hollow Studs] | 12 | 894 |
| 146 (-7) |  |
2429c01 | Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly] | 12 | 893 |
| 147 (-9) |  |
2432 | Tile Special 1 x 2 with Handle | 15 | 878 |
| 148 (+17) |  |
15392 | Weapon Gun Trigger | 2 | 878 |
| 149 (-5) |  |
64567 | Weapon Lightsaber Hilt without Bottom Ring | 9 | 877 |
| 150 (+1) |  |
11090 | Bar Holder with Clip | 9 | 877 |
| 151 (+7) |  |
2436 | Bracket 1 x 2 – 1 x 4 [Rounded Corners] | 9 | 852 |
| 152 (-6) |  |
60479 | 1×12 Plate | 9 | 848 |
| 153 (-10) |  |
40490 | Technic Beam 1 x 9 Thick | 10 | 847 |
| 154 (-4) |  |
3037 | Slope 45┬░ 2 x 4 | 18 | 837 |
| 155 (-1) |  |
60474 | Plate Round 4 x 4 with Pin Hole | 21 | 836 |
| 156 (+6) |  |
3937 | Hinge Brick 1 x 2 Base | 12 | 833 |
| 157 (+31) |  |
18677 | Plate Special 1 x 2 with Pin Hole | 4 | 809 |
| 158 (+6) |  |
3958 | Plate 6 x 6 | 25 | 803 |
| 159 — |  |
63965 | Bar 6L with Stop Ring | 10 | 802 |
| 160 — |  |
49668 | Plate Special 1 x 1 with Tooth | 15 | 795 |
| 161 (+18) |  |
60592 | Window 1 x 2 x 2 Flat Front | 13 | 793 |
| 162 (+15) |  |
14704 | Plate Special 1 x 2 5.9mm Centre Side Cup | 2 | 792 |
| 163 (-18) |  |
10247 | Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib] | 6 | 790 |
| 164 (+2) |  |
32278 | Technic Beam 1 x 15 Thick | 11 | 788 |
| 165 (-9) |  |
3035 | Plate 4 x 8 | 24 | 784 |
| 166 (-17) |  |
2450 | Wedge Plate 3 x 3 Cut Corner | 19 | 782 |
| 167 (-15) |  |
298c02 | Lever Small Base with Black Lever | 6 | 779 |
| 168 (-21) |  |
6231 | Panel 1 x 1 x 1 Corner | 13 | 778 |
| 169 (+20) |  |
14719 | 2×2 Tile, Corner | 13 | 777 |
| 170 (+33) |  |
18674 | Tile 2 x 2 Round with Center Stud | 12 | 774 |
| 171 (-4) |  |
6632 | Technic Beam 1 x 3 Thin | 10 | 769 |
| 172 (+14) |  |
30241 | Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud] | 11 | 760 |
| 173 (+10) |  |
15535 | Tile 2 x 2 Round with Hole | 9 | 750 |
| 174 (-13) |  |
43722 | Wedge Plate 3 x 2 Right | 18 | 745 |
| 175 (-12) |  |
88072 | Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm] | 9 | 742 |
| 176 — |  |
6628 | Technic Pin with Friction Ridges Lengthwise and Towball | 2 | 740 |
| 177 (+4) |  |
30565 | Plate Round Corner 4 x 4 | 23 | 737 |
| 178 (-21) |  |
32525 | Technic Beam 1 x 11 Thick | 14 | 735 |
| 179 (+5) |  |
60601 | Glass for Window 1 x 2 x 2 Flat | 9 | 730 |
| 180 (+12) |  |
15070 | Plate Special 1 x 1 with Vertical Tooth | 10 | 725 |
| 181 (-13) |  |
2445 | 2×12 Plate | 13 | 724 |
| 182 (-12) |  |
32039 | Technic Axle Connector with Axle Hole | 5 | 722 |
| 183 (-11) |  |
41769 | Wedge Plate 4 x 2 Right | 21 | 717 |
| 184 (+17) |  |
85080 | Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style] | 21 | 708 |
| 185 (-16) |  |
43723 | Wedge Plate 3 x 2 Left | 19 | 708 |
| 186 (-11) |  |
47457 | Brick Curved 2 x 2 x 2/3 Two Studs, Curved Slope End | 14 | 702 |
| 187 (-9) |  |
41770 | Wedge Plate 4 x 2 Left | 22 | 693 |
| 188 (-17) |  |
32184 | Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole | 7 | 691 |
| 189 (+2) |  |
6134 | Hinge Brick 2 x 2 Top Plate Thin | 8 | 684 |
| 190 (+14) |  |
22388 | Slope 45┬░ 1 x 1 x 2/3 Quadruple Convex | 10 | 682 |
| 191 (-17) |  |
6014b | Wheel 11 x 12 with Hole Notched for Wheels Holder Pin | 6 | 676 |
| 192 (-19) |  |
3747b | Slope Inverted 33┬░ 3 x 2 [Connections between Studs] | 14 | 658 |
| 193 (-6) |  |
32034 | Technic Axle and Pin Connector Angled #2 – 180┬░ | 10 | 658 |
| 194 (+5) |  |
87620 | Facet 2 x 2 | 15 | 640 |
| 195 (+2) |  |
92947 | Brick, Round 2 x 2 [Grill] | 8 | 632 |
| 196 (-14) |  |
3298 | Slope 33┬░ 3 x 2 | 18 | 620 |
| 197 (+3) |  |
2453 | Brick 1 x 1 x 5 with Blocked Open Stud | 17 | 603 |
| 198 (-2) |  |
30413 | Panel 1 x 4 x 1 with Rounded Corners [Thin Wall] | 17 | 602 |
| 199 (-6) |  |
4460b | Slope 75┬░ 2 x 1 x 3 with Hollow Stud | 18 | 594 |
| 200 (+68) |  |
26047 | Plate 1 x 1 Rounded with Handle | 8 | 591 |
| 201 (-11) |  |
87697 | Tyre 21 x 12 with Offset Tread Small Wide and Center Band | 1 | 585 |
| 202 (+7) |  |
11212 | Plate 3 x 3 | 8 | 583 |
| 203 (+10) |  |
44302 | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove | 7 | 579 |
| 204 (+2) |  |
3176 | Plate Special 3 x 2 with Hole | 17 | 574 |
| 205 (+10) |  |
87544 | Panel 1 x 2 x 3 [Side Supports / Hollow Studs] | 14 | 573 |
| 206 (+44) |  |
99563 | Money / Gold Bar [Ingot] | 9 | 570 |
| 207 (-12) |  |
32556 | Technic Pin Long without Friction Ridges | 1 | 568 |
| 208 (+12) |  |
14417 | Plate Special 1 x 2 with 5.9mm Centre Side Ball | 1 | 567 |
| 209 (-7) |  |
60477 | Slope 18┬░ 4 x 1 | 13 | 566 |
| 210 (-16) |  |
32002 | Technic Pin 3/4 | 1 | 562 |
| 211 (+16) |  |
30357 | Plate Round Corner 3 x 3 | 21 | 557 |
| 212 — |  |
60596 | Door Frame 1 x 4 x 6 Type 2 | 14 | 556 |
| 213 (+11) |  |
15462 | Technic Axle 5 with Stop | 2 | 551 |
| 214 (+14) |  |
88646 | Tile Special 4 x 3 with 4 Studs in Centre | 5 | 549 |
| 215 (-7) |  |
41239 | Technic Beam 1 x 13 Thick | 14 | 545 |
| 216 (-2) |  |
32449 | Technic Beam 1 x 4 Thin | 7 | 542 |
| 217 (-12) |  |
553 | Brick Round 2 x 2 Dome Top – Blocked Open Stud without Bottom Axle Holder | 22 | 542 |
| 218 (+4) |  |
4282 | 2×16 Plate | 12 | 541 |
| 219 (+24) |  |
4624 | RIM, NARROW, W/ 8.0 HOLE | 4 | 533 |
| 220 (-10) |  |
87747 | Barb Medium Flexible [Claw, Horn] | 15 | 532 |
| 221 (+4) |  |
30153 | Rock 1 x 1 Jewel 24 Facet | 10 | 532 |
| 222 (+11) |  |
93274 | Bracket 1 x 2 – 2 x 4 | 10 | 529 |
| 223 (-16) |  |
3706 | Technic Axle 6 | 2 | 529 |
| 224 (+46) |  |
21459 | Weapon Sword / Katana / Shamshir with Capped Pommel [Square Guard] | 9 | 525 |
| 225 (+4) |  |
32270 | Technic Gear 12 Tooth Double Bevel | 1 | 518 |
| 226 (-28) |  |
6587 | Technic Axle 3 with Stud | 2 | 512 |
| 227 (-9) |  |
55981 | Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes | 8 | 505 |
| 228 (-17) |  |
4287 | Slope Inverted 33┬░ 3 x 1 (34┬░) | 13 | 503 |
| 229 (-6) |  |
44294 | Technic Axle 7 | 2 | 502 |
| 230 (-13) |  |
3036 | Plate 6 x 8 | 15 | 495 |
| 231 (-10) |  |
30503 | Wedge Plate 4 x 4 Cut Corner | 12 | 492 |
| 232 (-16) |  |
3678 | Slope 65┬░ 2 x 2 x 2 with Bottom Tube | 20 | 491 |
| 233 (+11) |  |
63869 | Technic Axle and Pin Connector Perpendicular Triple | 3 | 491 |
| 234 (+3) |  |
93606 | Slope Curved 4 x 2 No Studs | 18 | 489 |
| 235 (+79) |  |
26601 | Wedge Plate 2 x 2 Cut Corner | 16 | 486 |
| 236 (+10) |  |
11215 | Bracket 5 x 2 x 1 1/3 | 9 | 479 |
| 237 (-7) |  |
3680 | Turntable 2 x 2 Plate, Base | 4 | 473 |
| 238 (+4) |  |
33183 | Plant, Carrot Top | 3 | 471 |
| 239 (-1) |  |
11203 | Tile Special 2 x 2 Inverted | 10 | 469 |
| 240 (+45) |  |
18649 | Plate Special 1 x 2 with Handles on Ends | 4 | 467 |
| 241 (-15) |  |
54383 | Wedge Plate 6 x 3 Right | 13 | 467 |
| 242 (-2) |  |
4733 | Brick Special 1 x 1 Studs on 4 Sides | 7 | 466 |
| 243 (-9) |  |
2449 | Slope Inverted 75┬░ 2 x 1 x 3 | 17 | 466 |
| 244 (-12) |  |
3894 | Technic Brick 1 x 6 [5 Holes] | 7 | 465 |
| 245 (-4) |  |
6179 | Tile Special 4 x 4 with Studs on Edge | 16 | 464 |
| 246 (-10) |  |
60484 | Technic Beam 3 x 3 T-Shape Thick | 5 | 463 |
| 247 — |  |
14716 | Brick 1 x 1 x 3 | 11 | 457 |
| 248 (-17) |  |
54384 | Wedge Plate 6 x 3 Left | 13 | 456 |
| 249 (-14) |  |
3957 | Antenna 1 x 4 with Rounded Top | 9 | 456 |
| 250 (+32) |  |
14418 | Plate Special 1 x 2 5.9mm End Cup | 1 | 454 |
| 251 (+14) |  |
15470 | Plate Round 1 x 1 Swirled Top | 6 | 449 |
| 252 (-13) |  |
3709 | Technic Plate 2 x 4 [3 Holes] | 8 | 448 |
| 253 (+4) |  |
15571 | Slope 45┬░ 2 x 1 Triple with Inside Stud Holder | 16 | 448 |
| 254 (+13) |  |
30237 | Brick Special 1 x 2 with Vertical Clip [Open O Clip] | 13 | 443 |
| 255 (+84) |  |
26603 | 2×3 Tile | 14 | 441 |
| 256 (+61) |  |
26604 | Brick Special 1 x 1 with Studs on 2 Adjacent Sides | 5 | 439 |
| 257 (-6) |  |
60581 | Panel 1 x 4 x 3 [Side Supports / Hollow Studs] | 16 | 439 |
| 258 (-3) |  |
3659 | Brick Arch 1 x 4 | 14 | 435 |
| 259 (-3) |  |
3030 | Plate 4 x 10 | 15 | 434 |
| 260 (-2) |  |
44301 | Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove | 6 | 432 |
| 261 (+32) |  |
24309 | Slope Curved 3 x 2 No Studs | 10 | 432 |
| 262 (+59) |  |
24316 | Technic Axle 3 with Stop | 1 | 425 |
| 263 (-4) |  |
6112 | 1×12 Brick | 12 | 422 |
| 264 (-11) |  |
2423 | Plant, Leaves 4 x 3 | 9 | 422 |
| 265 (+4) |  |
6232 | Brick Special 2 x 2 with Pin and Axle Hole | 7 | 421 |
| 266 (+40) |  |
23969 | Panel 1 x 2 x 1 with Rounded Corners and 2 Sides | 10 | 418 |
| 267 (-7) |  |
4216 | Brick Special 1 x 2 with Groove | 9 | 418 |
| 268 (+51) |  |
24246 | Tile 1 x 1 Half Circle | 10 | 418 |
| 269 (+15) |  |
59349 | Panel 1 x 6 x 5 | 16 | 414 |
| 270 (+37) |  |
15208 | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] | 7 | 413 |
| 271 (-19) |  |
6589 | Technic Gear 12 Tooth Bevel | 2 | 412 |
| 272 (+4) |  |
32016 | Technic Axle and Pin Connector Angled #3 – 157.5┬░ | 8 | 410 |
| 273 (+18) |  |
48092 | Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs | 15 | 410 |
| 274 (+4) |  |
92950 | Brick Arch 1 x 6 Raised Arch | 14 | 409 |
| 275 (+5) |  |
3829c01 | Vehicle Steering Stand 1 x 2 with Black Steering Wheel | 6 | 408 |
| 276 (-27) |  |
64647 | Headwear Accessory Plume / Feather Triple Point | 8 | 407 |
| 277 — |  |
60471 | Hinge Plate 1 x 2 Locking with 2 Fingers on Side | 5 | 405 |
| 278 (+73) |  |
22961 | Technic Pin Connector Hub with 1 Axle | 6 | 405 |
| 279 (-5) |  |
13965 | Brick Arch 1 x 3 x 3 [Gothic] | 9 | 405 |
| 280 (+73) |  |
28192 | Slope 45┬░ 2 x 1 with 2/3 Inverted Cutout and no stud | 10 | 404 |
| 281 (+43) |  |
15403 | Plate Special 1 x 2 with Mini Blaster | 4 | 403 |
| 282 (-28) |  |
3702 | Technic Brick 1 x 8 [7 Holes] | 7 | 403 |
| 283 (+136) |  |
33909 | Tile Special 2 x 2 with Only 2 studs | 10 | 402 |
| 284 (-22) |  |
15303 | Spring Shooter Ammuniton 8L | 10 | 402 |
| 285 (+9) |  |
11478 | Technic Beam 1 x 5 Thin with Axle Holes on Ends | 4 | 398 |
| 286 (-23) |  |
87082 | Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise | 3 | 397 |
| 287 (+3) |  |
32124 | Technic Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole | 5 | 394 |
| 288 (-15) |  |
60849 | Equipment Hose Nozzle with Side String Hole Simplified | 4 | 393 |
| 289 (-41) |  |
2817 | Plate Special 2 x 2 with 2 Pin Holes | 4 | 392 |
| 290 (+2) |  |
13547 | Slope Curved 4 x 1 Inverted | 16 | 391 |
| 291 (-10) |  |
88930 | Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes] | 18 | 391 |
| 292 (-73) |  |
61184 | Technic Pin 1/2 with 2L Bar Extension | 2 | 390 |
| 293 (-6) |  |
3703 | Technic Brick 1 x 16 [15 Holes] | 8 | 389 |
| 294 (+124) |  |
27925 | Tile 2 x 2 Macaroni | 18 | 389 |
| 295 (-12) |  |
96874 | Brick and Axle Separator v2.0 | 3 | 388 |
| 296 (+5) |  |
47905 | Brick Special 1 x 1 with Studs on 2 Sides | 9 | 387 |
| 297 (-31) |  |
3045 | Slope 45┬░ 2 x 2 Double Convex | 17 | 387 |
| 298 (-26) |  |
6111 | 1×10 Brick | 11 | 383 |
| 299 (-20) |  |
2419 | Wedge Plate 3 x 6 Cut Corners | 14 | 383 |
| 300 — |  |
3839b | Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment] | 5 | 382 |
| 301 (-26) |  |
4510 | Plate Special 1 x 8 with Door Rail | 8 | 381 |
| 302 (+94) |  |
32952 | Brick 1 x 1 x 1 2/3 with Studs on 1 Side | 14 | 380 |
| 303 (-17) |  |
3007 | 2×8 Brick | 9 | 373 |
| 304 (-8) |  |
3684c | Slope 75┬░ 2 x 2 x 3 Smooth | 15 | 371 |
| 305 (+50) |  |
27263 | Tile Special 2 x 2 Corner with Cut Corner – Facet | 14 | 370 |
| 306 (+4) |  |
43888 | Support 1 x 1 x 6 Solid Pillar | 13 | 370 |
| 307 (-12) |  |
60593 | Window 1 x 2 x 3 Flat Front | 10 | 369 |
| 308 (-47) |  |
58176 | Light Cover with Internal Bar / Bionicle Barraki Eye | 11 | 363 |
| 309 (-4) |  |
2447 | Headwear Accessory Visor For Standard Helmet | 6 | 362 |
| 310 (-8) |  |
41678 | Technic Axle and Pin Connector Perpendicular Double Split | 5 | 359 |
| 311 (-23) |  |
2921 | Brick Special 1 x 1 with Handle | 10 | 359 |
| 312 (+4) |  |
15706 | Plate Special 4 Stud 45┬░ Angle Plate | 9 | 354 |
| 313 (-24) |  |
43857 | Technic Beam 1 x 2 Thick | 7 | 351 |
| 314 (-50) |  |
4079b | Minifig Seat 2 x 2 with Center Sprue Mark | 10 | 351 |
| 315 (+7) |  |
59895 | Tyre 14 x 4 Smooth Small Single [New Style] | 1 | 351 |
| 316 (-4) |  |
6005 | Brick Arch 1 x 3 x 2 Curved Top | 16 | 348 |
| 317 (-14) |  |
4871 | Slope Inverted 45┬░ 4 x 2 Double | 14 | 345 |
| 318 (-10) |  |
52107 | Brick Special 1 x 2 with Studs on 2 Sides | 8 | 342 |
| 319 (+237) |  |
35480 | Plate, Modified 1 x 2 Rounded with 2 Open Studs | 9 | 342 |
| 320 (+14) |  |
14696 | Technic Link, Reinforced, with Beveled Edge | 1 | 339 |
| 321 (-23) |  |
4697b | Pneumatic T-Piece (T Bar) [New Style] | 4 | 338 |
| 322 (-51) |  |
2458 | Brick Special 1 x 2 with Pin | 7 | 338 |
| 323 (-19) |  |
30602 | Slope Curved 2 x 2 Lip, No Studs | 20 | 334 |
| 324 (-15) |  |
44567 | Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove | 6 | 333 |
| 325 (+54) |  |
22385 | Tile Special 2 x 3 Pentagonal | 17 | 332 |
| 326 (-27) |  |
59426 | Technic Axle 5.5 With Stop [Rounded Short End] | 1 | 332 |
| 327 (-30) |  |
2653 | Brick Special 1 x 4 with Groove | 2 | 331 |
| 328 (-5) |  |
91988 | 2×14 Plate | 7 | 328 |
| 329 (+92) |  |
32607 | Plant, Plate 1 x 1 Round with 3 Leaves | 5 | 325 |
| 330 (+3) |  |
2736 | Technic Axle Towball | 1 | 323 |
| 331 (-4) |  |
10928 | Technic Gear 8 Tooth [Reinforced] | 1 | 315 |
| 332 (-4) |  |
32291 | Technic Axle and Pin Connector Perpendicular Double | 6 | 314 |
| 333 (-15) |  |
3899 | Equipment Cup / Mug [Plain] | 6 | 310 |
| 334 (-14) |  |
2460 | Tile Special 2 x 2 with Pin | 6 | 307 |
| 335 (-22) |  |
42610 | Wheel 11 x 8 with Center Groove | 1 | 306 |
| 336 (+20) |  |
30028 | Tyre 14 x 9 Smooth Small Wide Slick | 1 | 305 |
| 337 (+62) |  |
18653 | Brick Modified 1x3x2 with Inside Bow | 15 | 304 |
| 338 (-1) |  |
6553 | Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle) | 3 | 304 |
| 339 (+19) |  |
74967 | Wheel 8 x 9 with Hole Notched for Wheels Holder Pin, Re-inforced Back | 6 | 303 |
| 340 (+3) |  |
60594 | Window 1 x 4 x 3 without Shutter Tabs | 10 | 301 |
| 341 (+11) |  |
6126b | Wave / Flame Rounded with Base Rim | 5 | 300 |
| 342 (-10) |  |
3029 | Plate 4 x 12 | 13 | 299 |
| 343 (+7) |  |
3033 | Plate 6 x 10 | 13 | 298 |
| 344 (-13) |  |
30553 | Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole | 4 | 297 |
| 345 (-10) |  |
3895 | Technic Brick 1 x 12 [11 Holes] | 7 | 292 |
| 346 (-20) |  |
3028 | Plate 6 x 12 | 15 | 292 |
| 347 (-18) |  |
30236 | Brick Special 1 x 2 with Handle | 7 | 291 |
| 348 (-10) |  |
30137 | Brick Special 1 x 4 Palisade [aka Log] | 7 | 291 |
| 349 (-13) |  |
32009 | Technic Beam 1 x 11.5 Double Bent Thick | 13 | 291 |
| 350 (-39) |  |
2476 | Plate Special 2 x 2 with Pin on Bottom | 3 | 289 |
| 351 (+8) |  |
30383 | Hinge Plate 1 x 2 Locking with 1 Finger On Top | 7 | 288 |
| 352 (+22) |  |
4865a | Panel 1 x 2 x 1 [Square Corners] | 12 | 288 |
| 353 (-9) |  |
92438 | Plate 8 x 16 | 20 | 287 |
| 354 (+14) |  |
10197 | Technic Pin Connector Hub with 2 Perpendicular Axles | 4 | 284 |
| 355 (+6) |  |
92582 | Hinge Plate 2 x 2 Locking with 1 Finger on Top | 5 | 284 |
| 356 (+48) |  |
18671 | Bracket 3 x 2 x 1 1/3 | 7 | 284 |
| 357 (-9) |  |
60602 | Glass for Window 1 x 2 x 3 Flat Front | 3 | 284 |
| 358 (-43) |  |
50745 | Mudguard 4 x 2 1/2 x 2 with Arch Round | 16 | 282 |
| 359 (+48) |  |
18980 | Plate Round Corner 2 x 6 Double | 15 | 281 |
| 360 (-11) |  |
43898 | Dish 3 x 3 Inverted [Radar] | 16 | 280 |
| 361 (-31) |  |
4488 | Plate Special 2 x 2 with Wheel Holder | 2 | 280 |
| 362 (+74) |  |
24307 | Wedge Plate 2 x 2 Right | 13 | 278 |
| 363 (-21) |  |
48989 | Technic Pin Connector Hub Perpendicular 3L with 4 Pins | 1 | 278 |
| 364 (+19) |  |
13731 | Slope Curved 10 x 1 [Symmetric Inside Ridges] | 17 | 276 |
| 365 (-20) |  |
14395 | Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports] | 8 | 276 |
| 366 (-2) |  |
4185 | Technic Wedge Belt Wheel [aka Pulley] | 9 | 275 |
| 367 (+10) |  |
93095 | Panel 1 x 2 x 1 with Rounded Corners and Central Divider | 10 | 274 |
| 368 (+49) |  |
98100 | Brick Round 2 x 2 Truncated Cone | 6 | 273 |
| 369 (-22) |  |
3633 | Fence 1 x 4 x 1 | 7 | 272 |
| 370 (+6) |  |
88292 | Brick Arch 1 x 3 x 2 | 11 | 271 |
| 371 (-46) |  |
32530 | Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top] | 5 | 269 |
| 372 (+74) |  |
24299 | Wedge Plate 2 x 2 Left | 14 | 268 |
| 373 (-27) |  |
41539 | Plate 8 x 8 | 17 | 268 |
| 374 (-11) |  |
2465 | 1×16 Brick | 10 | 268 |
| 375 (+67) |  |
11833 | Plate Round 4 x 4 with 2 x 2 Hole | 10 | 268 |
| 376 (+11) |  |
15461 | Technic Pin Connector 3L with 2 Pins and Center Hole | 2 | 268 |
| 377 (-6) |  |
60485 | Technic Axle 9 | 2 | 268 |
| 378 (-9) |  |
94925 | Technic Gear 16 Tooth Reinforced [New Style] | 1 | 265 |
| 379 (-38) |  |
56145 | Wheel 30.4 x 20 without Pinholes, with Reinforced Rim | 9 | 264 |
| 380 (+8) |  |
4600 | Plate Special 2 x 2 with Wheel Holders | 3 | 264 |
| 381 (-24) |  |
2730 | Technic Brick 1 x 10 [9 Holes] | 4 | 263 |
| 382 (-28) |  |
6180 | Tile Special 4 x 6 with Studs on Edges | 13 | 262 |
| 383 (-1) |  |
75937 | Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | 6 | 261 |
| 384 (-14) |  |
3707 | Technic Axle 8 | 2 | 261 |
| 385 (+53) |  |
23443 | 3.2 SHAFT W/3.2 HOLE | 6 | 260 |
| 386 (-46) |  |
3679 | Turntable 2 x 2 Plate – Top | 1 | 259 |
| 387 (+29) |  |
11609 | Star with Stud Holder | 5 | 257 |
| 388 (-22) |  |
15400 | Brick Special – Spring Shooter 1 x 4 with Light Bluish Gray Top | 1 | 257 |
| 389 (-16) |  |
55013 | Technic Axle 8 with Stop | 1 | 256 |
| 390 (+20) |  |
18575 | Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening] | 2 | 255 |
| 391 (-24) |  |
30350b | Tile Special 2 x 3 with 2 Clips [Thick Open O Clips] | 15 | 253 |
| 392 (-3) |  |
60476 | Brick Special 1 x 1 with Clip Horizontal | 3 | 251 |
| 393 (+47) |  |
87609 | Plate Special 2 x 6 x 2/3 [Four Studs on Side] | 14 | 249 |
| 394 — |  |
11213 | Plate Round 6 x 6 with Hole | 13 | 249 |
| 395 — |  |
2496 | Wheel Skateboard / Trolley | 2 | 249 |
| 396 (-31) |  |
15332 | Fence Spindled 1 x 4 x 2 [4 Top Studs] | 9 | 248 |
| 397 (+32) |  |
3938 | Hinge Brick 1 x 2 Top Plate Thin | 7 | 244 |
| 398 (-12) |  |
30363 | Slope 18┬░ 4 x 2 | 10 | 244 |
| 399 (-27) |  |
32192 | Technic Axle and Pin Connector Angled #4 – 135┬░ | 9 | 243 |
| 400 (-38) |  |
6629 | Technic Beam 1 x 9 Bent (6 – 4) Thick | 8 | 243 |
| 401 (+62) |  |
22888 | Plate Round Corner 4 x 8 Double | 18 | 242 |
| 402 (-22) |  |
32063 | Technic Beam 1 x 6 Thin | 4 | 241 |
| 403 (-19) |  |
30165 | Brick Curved 2 x 2 with Two Top Studs | 13 | 241 |
| 404 (-11) |  |
32348 | Technic Beam 1 x 7 Bent (4 – 4) Thick | 10 | 240 |
| 405 (-5) |  |
92907 | Technic Axle and Pin Connector Perpendicular Split | 4 | 236 |
| 406 (+37) |  |
89522 | Horn (Unicorn) | 12 | 236 |
| 407 (-5) |  |
98282 | Mudguard 4 x 2 1/2 x 1 with Arch Round | 9 | 234 |
| 408 (-16) |  |
50305 | Wedge Plate 8 x 3 Left | 13 | 234 |
| 409 (-24) |  |
32056 | Technic Beam 3 x 3 L-Shape Thin | 6 | 232 |
| 410 (+44) |  |
99021 | Pneumatic Hose Connector with Axle Connector | 2 | 230 |
| 411 (-8) |  |
90194 | Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside] | 13 | 228 |
| 412 (+139) |  |
29120 | Wedge 2×1 with Stud Notch Left | 12 | 227 |
| 413 (+156) |  |
29119 | Wedge 2×1 with Stud Notch Right | 12 | 226 |
| 414 (+9) |  |
32474 | Technic Ball Joint | 12 | 226 |
| 415 (+65) |  |
87414 | Tyre Offset Tread Small with Band around Center of Tread | 1 | 226 |
| 416 (-19) |  |
50304 | Wedge Plate 8 x 3 Right | 13 | 225 |
| 417 (-9) |  |
3831 | Hinge Brick 1 x 4 [Lower] | 9 | 225 |
| 418 (-9) |  |
3830 | Hinge Brick 1 x 4 [Upper] | 9 | 225 |
| 419 (+3) |  |
15391 | Weapon Gun / Blaster / Shooter Mini | 6 | 224 |
| 420 (+19) |  |
64799 | Plate Special 4 x 4 with 2 x 2 Cutout | 9 | 224 |
| 421 (-15) |  |
57895 | Glass for Window 1 x 4 x 6 | 8 | 224 |
| 422 (-44) |  |
42446 | Neckwear Bracket [One Stud] | 6 | 223 |
| 423 (-32) |  |
32014 | Technic Axle and Pin Connector Angled #6 – 90┬░ | 6 | 223 |
| 424 (+125) |  |
32803 | Slope Curved 2 x 2 Inverted | 6 | 223 |
| 425 (-65) |  |
32001 | Technic Plate 2 x 6 [5 Holes] | 6 | 223 |
| 426 — |  |
14419 | Plate Special 1 x 2 with 5.9mm End Cup and Ball | 1 | 223 |
| 427 (-14) |  |
2343 | Equipment Goblet | 6 | 222 |
| 428 (+30) |  |
41669 | Technic Tooth 1 x 3 with Axle Hole | 17 | 222 |
| 429 (-28) |  |
92013 | Technic Brick Special 2 x 2 with Ball Receptacle Wide and Axle Hole | 7 | 221 |
| 430 (+20) |  |
24375 | Rubber Technic Thread Attachment | 2 | 220 |
| 431 (-20) |  |
92402 | Tyre 30.4 x 14 Offset Tread [Centre Band] | 1 | 219 |
| 432 (+23) |  |
6003 | Plate Round Corner 6 x 6 | 13 | 218 |
| 433 (-2) |  |
50951 | Tyre 14 x 6 Solid Smooth | 1 | 217 |
| 434 (-36) |  |
32018 | Technic Brick 1 x 14 [13 Holes] | 3 | 216 |
| 435 (-8) |  |
22667 | Plant, Cherries | 3 | 216 |
| 436 (+51) |  |
11253 | Sports Roller Skate | 7 | 215 |
| 437 (-17) |  |
16770 | Barb Large (Claw, Talon) with Clip | 10 | 214 |
| 438 (-5) |  |
32015 | Technic Axle and Pin Connector Angled #5 – 112.5┬░ | 10 | 213 |
| 439 (-49) |  |
64782 | Technic Panel 1 x 5 x 11 | 10 | 213 |
| 440 (+148) |  |
25214 | Brick Round 1 x 1 diameter Tube with 90 Degree Elbow(2 x 2 x 1) and Axle Holes(Crossholes) at each end | 8 | 212 |
| 441 (+74) |  |
27507 | Tile 4 x 4 Macaroni | 14 | 212 |
| 442 (+6) |  |
46212 | Brick 1 x 2 x 5 without Side Supports | 8 | 212 |
| 443 (+18) |  |
4490 | Brick Arch 1 x 3 | 8 | 212 |
| 444 (-63) |  |
30162 | Equipment Binoculars | 4 | 211 |
| 445 (-15) |  |
32072 | Technic Knob Wheel | 2 | 211 |
| 446 (+1) |  |
13548 | Wedge 2 x 2 (Slope 45┬░ Corner) | 9 | 209 |
| 447 (+10) |  |
64179 | Technic Beam 5 x 7 Open Center Thick | 3 | 209 |
| 448 (-7) |  |
74261 | Hero Factory Joint Extender [High Friction] | 1 | 209 |
| 449 (-5) |  |
87081 | Brick Round 4 x 4 [Centre Hole] | 8 | 208 |
| 450 (-13) |  |
30157 | Plate Special 2 x 4 with Pins | 3 | 208 |
| 451 (+21) |  |
47456 | Brick Wedged 2 x 3 x 2/3 Two Studs, Wing End | 17 | 207 |
| 452 (+27) |  |
2723 | Technic Disk 3 x 3 | 2 | 206 |
| 453 (+35) |  |
20310 | Brick Special 1 x 1 with Scroll with Open Stud | 5 | 205 |
| 454 (-19) |  |
30031 | Minifig Handlebars | 5 | 204 |
| 455 (-40) |  |
30176 | Plant, Round 1 x 1 – 3 Bamboo Leaves | 2 | 203 |
| 456 (+53) |  |
18976 | Wheel 18 x 12 with Axle Hole and Stud | 7 | 200 |
| 457 (+29) |  |
43719 | Wedge Plate 4 x 4 with 2 x 2 Cutout | 13 | 200 |
| 458 (-13) |  |
11610 | Food Ice Cream Cone | 8 | 200 |
| 459 (-7) |  |
47398 | Wedge Plate 12 x 3 Right | 9 | 198 |
| 460 (+14) |  |
3297 | Slope 33┬░ 3 x 4 | 10 | 198 |
| 461 (+120) |  |
34103 | Plate Special 1 x 3 with 2 Studs with Groove and Inside Stud Holde | 10 | 197 |
| 462 (+7) |  |
30145 | Brick 2 x 2 x 3 | 9 | 196 |
| 463 (-39) |  |
3942c | Cone 2 x 2 x 2 [Completely Open Stud] | 15 | 195 |
| 464 (-4) |  |
30000 | Brick Special 2 x 2 with 2 Pins and Axle Hole | 4 | 194 |
| 465 (-37) |  |
30552 | Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends | 3 | 194 |
| 466 (-34) |  |
99773 | Technic Beam Triangle Thin [Type II] | 4 | 193 |
| 467 (+6) |  |
33243 | Brick Modified 1 x 3 x 2 with Curved Top | 17 | 193 |
| 468 (+14) |  |
2639 | 4×4 Plate, Corner | 3 | 192 |
| 469 (-13) |  |
33299a | Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank | 3 | 191 |
| 470 (+26) |  |
47455 | Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | 2 | 191 |
| 471 (-57) |  |
3742 | Plant, Flower – Small | 5 | 190 |
| 472 (+11) |  |
15458 | Technic Panel 3 X 11 x 1 | 10 | 190 |
| 473 (-48) |  |
32271 | Technic Beam 1 x 9 Bent (7 – 3) Thick | 11 | 190 |
| 474 (+17) |  |
99008 | Technic Axle 4 with Centre Stop | 1 | 189 |
| 475 (+6) |  |
15533 | Brick Special 1 x 4 with Masonry Brick Profile | 4 | 188 |
| 476 (-71) |  |
90640 | Hero Factory Armor with Ball Joint Socket – Size 4 | 24 | 188 |
| 477 (-7) |  |
6157 | Plate Special 2 x 2 with Wheels Holder Wide | 3 | 187 |
| 478 (-14) |  |
3708 | Technic Axle 12 | 2 | 187 |
| 479 (-30) |  |
3038 | Slope 45┬░ 2 x 3 | 6 | 185 |
| 480 (-46) |  |
92690 | Bar 1L with Top Stud and Two Side Studs | 4 | 184 |
| 481 (-16) |  |
6106 | Wedge Plate 6 x 6 Cut Corner | 6 | 184 |
| 482 (+20) |  |
16577 | Brick Arch 1 x 8 x 2 Raised | 10 | 184 |
| 483 (+39) |  |
18977 | Tyre 24 x 12 Low Profile | 1 | 184 |
| 484 (+128) |  |
32828 | Plate Round 1 x 1 with Hole and Horizontal Bar | 3 | 182 |
| 485 (-8) |  |
32059 | Wedge Plate 4 x 6 Cut Corners | 16 | 181 |
| 486 (-2) |  |
53585 | Technic Ball Joint with Through Axle Hole | 1 | 180 |
| 487 (-19) |  |
6081 | Brick Curved 2 x 4 x 1 1/3 with Curved Top | 16 | 179 |
| 488 (-10) |  |
15395 | Brick Round 2 x 2 Dome Bottom [Open Stud] | 12 | 179 |
| 489 (-4) |  |
47397 | Wedge Plate 12 x 3 Left | 9 | 178 |
| 490 (+5) |  |
6215 | Brick Curved 2 x 3 with Curved Top | 13 | 178 |
| 491 (-116) |  |
13971 | Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring | 3 | 178 |
| 492 (+39) |  |
18041 | Weapon Harpoon [Smooth Shaft] | 3 | 177 |
| 493 (+31) |  |
15254 | Brick Arch 1 x 6 x 2 – Thin Top without Reinforced Underside [New Version] | 13 | 176 |
| 494 (-1) |  |
3743 | Technic Gear Rack 1 x 4 | 3 | 176 |
| 495 (+3) |  |
61485 | Turntable 4 x 4 Square Base, Locking | 3 | 173 |
| 496 (-20) |  |
42023 | Slope Curved 6 x 1 Inverted | 10 | 171 |
| 497 (+421) |  |
36840 | Bracket 1 x 1 – 1 x 1 Inverted | 6 | 169 |
| 498 (-39) |  |
3738 | Technic Plate 2 x 8 [7 Holes] | 7 | 168 |
| 499 (-46) |  |
52501 | Slope Inverted 45┬░ 6 x 1 Double with 1 x 4 Cutout | 8 | 168 |
| 500 (+115) |  |
22890 | Plate Special 1 x 2 with End Towball | 1 | 168 |